Retsch Sieb 500um Mesh S-Steel 200mm x 25mm

Milestone Ethos plus 2 Microwave Solvent Extraction Labstation This system was removed from a univer (more)sity where it was surplus to requirement. All units are in good cosmetic condition, with the primary unit (Milestone Ethos plus 2) and PC Set-Up turning on, however, there is no power in the LabTerminal 800 Controller. The system is sold for spares/repairs. -1x Milestone Microwave Laboratory Systems LabTerminal 800 Controller1x easywave chip card for the controllerS/N- 0205722 -2x Rotor' for microwave - Relevant vessels and safety shields for rotors -2x ATC-FO sensors for microwave -2x Torque wrenches for rotor -2x Extraction Pipes 1x Monitor (IIyama Prolite B2206WS) and Dell Tower Optiplex GX620Includes: Pipette tracker v3.3 Software

Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2 This item was removed from a uni (more)versity where it was surplus to requirement. The unit powers up and is in good working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition.

Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2 This item was removed from a uni (more)versity where it was surplus to requirement. The unit powers up and is in good working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition.

CDS Chemical Data Systems 190 Pyroprobe ( No Probes) This was removed from a university lab where it (more) was surplus to requirements. The unit powers up but we were unable to test it further. It is in reasonably good cosmetic condition with marks from use.

Laboratory turnkey Bioer GeneLab. Integral solution that enables the reduction of costs and commissi (more)oning times. Includes areas of separate work with the photo the paneling tight sandwich-type steel floor PVC a heat-sealed bag, seals type, scotland, lighting, furniture, pressurization positive/negative for contamination control, air filtration, germicidal light, locks between rooms, for transfer of samples, pre-installation of electrical systems, hvac, telephony and the internet. Different configurations to choose suitable for laboratories of molecular biology and cell culture, among others.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Brinkmann CH-500 Column Heater This item was removed from a university lab where it was surplus to  (more)requirements. It is in good cosmetic condition but is missing a screw for the side panel. The unit powers up and is in full working order. It was tested with a digital thermometer (not included).

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)a warning light flashes. It was not tested further. It is sold for spares/repairs

Mettler Toledo 20KGF2 Class Calibration Weight This was removed from a laboratory where it was surpl (more)us to requirements. The unit is in good cosmetic condition but the case has marks and cracks from use.

Branson Converter Stand Clamp for SFX150 & SLP Sonifiers The Branson Converter Clamp (101-063-1 (more)109), is designed to be used with the Branson Support Stand and Rod when using the SFX150 and SLP sonifiers. This product ensures easy adjustments of horn positioning in relation to the sample. Sonifier CompatibilitySFX 250, SFX 450, and SFX 550 SonifiersCompatible Stand (H x Dia.)101-063-1108

Hirayama HICLAVE HVP-50 Floor-Standing Autoclave with Heat/Vacuum Drying, 50L, 120V Chamber Volume 5 (more)0L Sterilization Temperature Range 105C to 135C Chamber Dimensions 11.8" x 28" (30 cm x 71 cm) Features - Space-saving design with lid opening upward. - Fully automatic drying cycle for solid loads uses heat and vacuum for faster and more efficient drying. - Lid safety interlock prevents lid opening when a cycle is in progress, the chamber is pressurized, or when the temperature exceeds 97°C. - Pre-vacuum cycle - vacuum pump removes air from the chamber when sterilizing solids such as glassware and pipette tips, thereby eliminating cold spots, and ensuring faster and more efficient sterilization. - One-touch lever to easily open and close chamber lid. - Liquid cycle for media and agar. - Process display shows the program progress selected and status of the sterilization cycle. - Cycle for wastes and glassware without drying. - Bacteria filter reduces re-contamination. - Door-closure sensor prevents a cycle from starting unless the door is closed properly. The HVP-50 Autoclave (with a 50-L chamber) is a self-contained, portable floor model mounted on casters. It occupies minimum floor space, operates at 120V, and can fit conveniently into many locations in the laboratory. Its many uses include the sterilization and drying of glassware, pipette tips, lab coats, wastes and also liquids such as agar and media. The HVP-50 can accommodate a 10-L fermenter, a 15-L carboy, a 19” x 24” biohazard bag, six 1-L flasks, twenty-one 500-mL bottles, 180 x 20-mm test tubes in two stacked baskets, or 270 x 13-mm tubes in three stacked baskets.INCLUDED: The Hirayama HICLAVE HVP-50 Floor-Standing Autoclave with Heat/Vacuum Drying, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Ohaus AX223/E Adventurer Precision Balance Maximum Capacity 220 g Readability 1 mg Repeatability (Ty (more)pical) 1 mg Features - High-accuracy weighing with a maximum capacity of 220 g and 1 mg readability - Reliable external calibration allows for precise measurements and ensures consistent accuracy during routine maintenance - 4.3" full-color VGA touchscreen display with user-controlled brightness for intuitive operation - Dual USB ports for easy data transfer and PC connectivity, meeting traceability requirements - Durable construction with a metal base, ABS top housing, and stainless steel pan for long-term use - Included draftshield with two-piece top-mounted side doors and sliding top door for easy access and reduced bench space usage - Fast 3-second stabilization time improves productivity in routine weighing tasks - RS232 and USB communication ports for seamless connection to printers and other devices - Space-saving design with wide door entry for easy placement of larger weighing vessels The OHAUS Adventurer is a precision instrument, designed to address both routine and specialized weighing needs in modern laboratories. Its interface boasts a 4.3" VGA graphic touchscreen, ensuring intuitive operation. Adhering to GLP/GMP standards, it integrates a three-tier user management system. Communication is streamlined with RS232, USB Host, and USB Device ports, with real-time clock data output capabilities.Constructed for longevity, it comprises a metal base, ABS top housing, and a stainless steel pan. Key design attributes include selectable environmental filters, auto tare functions, and user-definable calibration points. It supports user-specific communication configurations, data print options, and offers a selection of up to nine operating languages.INCLUDED: The Ohaus AX223/E Adventurer Precision Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty