Retsch Sicherheitsverschluss Safety Closure Device PM/S100 (500ml) 22.867.0005

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

A laboratory oven with forced ventilation and an exceptional quality/price ratio! 100% Made in Italy (more) and with all accessories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:    - External structure in steel painted with anti-acid epoxy powder    - Inner chamber in 18/8 stainless steel    - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 300°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory Oven STF-F 52 FALC Forced Ventilation

KNF N86KN.18 vacuum pump. Diaphragm pump and compressor for slightly corrosive gases and vapors. Wit (more)hout oil. Flow L/min 6, final vacuum mbar 100, pressure bar 2.4. Includes vacuum regulator. Dimensions 164*141*90mm. Weight 1.9 kg. User manual.

HACH COD REACTOR 16500 dry block. Operating temperature 105°C (±15°) to 150°C (±2°) to 155°C (±5°)C. (more) 150°C, ±2°C. Temperature indicator via built-in thermometer ± 5°C. Response and warm-up time 30-40 minutes. Capacity for 16 culture vials of 15 × 100 mm. Dimensions 165x102x247 mm. 3.4kg. User manual The HACH COD REACTOR 16500 dry block is equipment designed to perform laboratory tests. With its rapid heating capability and precise temperature control, this dry block ensures reliable and reproducible results. In addition, its compact and easy-to-use design makes it an ideal tool for laboratories of different sizes.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Grant GD100 recirculating bath. Temperature 37 ºC. Bucket volume of 12 L. Digital thermostat. Visual (more) failure alarm. With cover. Includes user manual. The Grant GD100 immersion circulation bath is high-quality laboratory equipment that allows maintaining a constant and uniform temperature in liquid samples. With a capacity of 8 liters, this bath is ideal for a wide range of applications, from incubating cultures to preparing samples for laboratory testing. Equipped with a digital temperature controller and an efficient circulation system, the Grant GD100 bath ensures homogeneous heat distribution, resulting in higher precision in experiments. Plus, its compact and durable design makes it a reliable choice for demanding laboratory environments. Whether you work in scientific research, chemical analysis, or any other discipline that requires precise temperature control, the Grant GD100 Immersion Circulating Bath is an essential tool to help you achieve consistent and reliable results in your research.

a VERY RARE TO FIND callsic VINTAGE Precision HF / VHF / SHF  Signal Generator Manuf.: ROHDE & SCHWA (more)RZ / GERMANY Model: SMFA BN 41300 with following Accessories : coupling head...............................................41300 - 36separ. capacitor with fuse..........................41300 - 37tips and cables..............................................41300 -  36.7.........19129-6.....19129-3.....19129-5....19129-7.....19129-8adapter cable.................................................41300-34ORIGINAL R & S Manual for Operation and Service with ALL Technical Information,  wiring diagrams etc. etc. Description: frequency range..............................................1.39 MHz to 510 MHz  ( in 12 Ranges )rf output level impedance..............................50 Ohms .............DECIFIX  Boutput voltage..................................................0.03 uV ( rms )  ............to 2 V ( rms ) .......without attenuator..... 110 dBuV and 120 dBuVrf attenuator......................................................in 10 dB  steps - 20 dBuV to + 100 dBuVelectronic fine tuning.....................................+/- 30 kHz.....100  kHz......300 kHzinternal modulation generator ranges.......10 Hz-100Hz.............100 Hz to  1000Hz.......1 kHz to 10 khz......10 kHz to 100 kHz....0-6 VoltsAM........................................................................0 % to  95 %.................10 Hz to 100 kHzFM........................................................................deviation  0 to +/- 300 kHz in 3 ranges..........frequency........10 Hz to 100 kHz Power Supply..................................................115 /230 VAC LINE  150 VA instrument is in EXCELLENT cosmetic condition SEE PHOTO and still 100 %  functional testeda VERY RARELY to find VINTAGE JEWEL from R & S We PREFER personal pick up, but we could ship to any country - please ask before  your purchase.

Labconco CentriVap Aqueous SystemIdeal forbiology, microbiology, biochemistry, pharmaceutical resear (more)ch, and analyticalchemistry laboratories, centrifugal concentrators quickly process theevaporation of multiple small samples. Benchtop Vacuum Concentrators feature30.5cm (12") dia. epoxy-coated aluminum chambers to accommodate a wideselection of high-capacity rotors. A microprocessor controls centrifugal motionto eliminate bumping and foaming during vacuum evaporation. The brushless motorhas a maximum speed of 1725rpm. A large automatic vacuum release valve preventsloss of sample by quickly releasing the vacuum before the rotor stops. Duringstartup, a built-in vacuum delay prevents bumping by allowing the rotor toachieve set speed before applying vacuum. Up to nine user-set programs may bestored to define temperature, heat time, and run time. Program temperature andtime may be altered while the program is being run. Timer may be set for 1 to999 minutes. An easy-to-read LCD shows program number, actual and set pointtemperatures, heat time, run time, and a heat boost indicator. The controlpanel features three Quick-Start* buttons that each store one user-set program.An audible alarm signals completion of set point run time. INCLUDED: The Labconco 7982010 CentriVap Aqueous System, 115V, 60Hz includes: - Benchtop Vacuum Concentrator - Cold Trap -50°C - Clear Canister 7460900 - Moisture Insert 7814900 - 12-13 mm Rotor 7455100 - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nEXT300D - ISO100 160W Turbomolecular Pump Ultimate Vacuum <6x10-8 mbar Inlet Connection  (more)DN100ISO-K Pumping Speed Nominal 18,000.00 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. INCLUDED: The Edwards nEXT300D - ISO100 160W Turbomolecular Pump includes: - One Year Manufacturer's Warranty