Minicabina biosecurity

QUALITY LABORATORY CENTRIFUGES - OHAUS Ohaus designed this instrument to cover virtually all applica (more)tions in research, industrial and clinical laboratories. The bestselling FC5718, like the entire Frontier™ 5000 range, offers high speed performance for maximum volume, automatic rotor identification and next generation safety features. The best versatility - Large variety of compatible rotors and accessories (19 optional rotors and 121 accessories) - Microliter to 4x100ml capacities (including PCR strips and microliter plates) - High-speed centrifugation for tubes from 0.2ml up to 85ml - Available in the version with refrigeration system and variable temperature from -20°C to 40°C The best usability - Automatic recognition of the rotor in seconds - No risk of damaging the centrifuge even if used by less experienced personnel - Easy-to-read LCD control panel; two-line display and real-time information - Ergonomic adjustment knob for easy parameter setting - Ability to set and view the speed in both rpm and RCF - 99 sets of storable parameters More security - Double imbalance sensor: two separate sensors designed to detect high and low vibrations, caused by imbalances; computerized detection system with dedicated unbalance parameters for each rotor - Motorized locking system for the centrifuge lid - Overspeed protection automatically activated upon rotor installation - Better protection for both equipment and personnel You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. Applications Separation, sample preparation, cell pelletization, protein separation, nucleic acid separation, cell concentration, chemical separation, diagnostics, environmental sample preparation, blood sample processing Screen Backlit Liquid Crystal Display (LCD) Materials Corrosion resistant stainless steel chamber with polycarbonate / ABS plastic lid Additional features Ten speeds of acceleration and deceleration, selection of run time from 10s to 99h 59min or continuous, CFC-free refrigeration system (refrigerated models), sample temperature (refrigerated models), lid lock system, overspeed protection, detection double imbalance TECHNICAL FEATURES - Speed ​​range from 200 rpm to 18,000 rpm - Maximum relative centrifugal force (xg) 23,542 g - Maximum capacity (rotor) 4 x 100 ml - Program memories 99 - Acceleration gear 10 - Deceleration gear 10 COMPATIBLE ROTORS: Angle 4 x 85ml ID RB Hi. Angle 12 x 15ml RB / FA ID. Angle 24 x 1.5 / 2.0ml ID Sealable. Angle 6 x 50ml RB ID Hi. Swing out 4 x 100ml ID. Angle 12 x 1.5 / 2.0ml ID. 4 x 8W PCR Strip ID Corner. Angle 44 x 1.5 / 2.0ml ID. Swing out 4 x 100ml ID sealable. Angle 6 x 85ml ID RB. Angle 24 x 1.5 / 2.0ml ID. Angle 6 x 85ml RB ID Hi. Angle 30 x 15 ml RB / FA ID. Angle 30 x 1.5 / 2.0ml ID Sealable. Angle 10 x 50 ml FA ID. Angle 64 x 0.5ml ID. Angle 20 x 10ml ID RB Hi. Angle 6 x 50ml RB / FA ID. Swing out 2 x 3MTP ID.

Temperature range: 25 – 99.9°C Temperature resolution: 0.1°C Temperature stability: ± 0.2°C Timer: 0 (more):01 min – 9:59 h Bath opening (WxL): 500 x 300 mm Bath depth: 180 mm Capacity: 8 – 22 L Dimensions (WxDxH): 560 x 350 x 320 mm Weigth: 20 kg

MVE XLC 230 Liquid Nitrogen Dewar This was removed from a university lab where it was surplus to re (more)quirements. The unit is in reasonable cosmetic condition with marks from use but has not been tested. It comes with 6 storage racks each with 8 draws. Internal Dimensions are: D70cm x W40cm.

This Solartron Schlumberger 1286 Electrothermal Interface was removed from a university lab where ti (more) was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with marks from use. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Mettler Toledo 20KG M1 Class Calibration Weight This was removed from a laboratory where it was surp (more)lus to requirements. The unit is in good cosmetic condition but the case has marks from use.

Carl Zeiss Axioskop EL Einsatz Microscope This was removed from a university lab where it was surplu (more)s to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with marks from use. Eyepieces:2 x 44 40 32 Objectives:Plan NEOFLUAR 10x/0.30 ∞/0.17ACHROSTIGMAT 40x/0.65 ∞/0.17, 44 01 50Epiplan - NEOFLUAR 50x/0.80 HD 44 23 50 (Some of the text has come off this objective since there was a sticker on it. Removing it must have lifted the print.)

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

IKA C-Mag HS 7 Magnetic Hotplate Stirrer Speed Range 100 to 1,500 RPM Heating Temp. Range 50 to 50 (more)0°C Stirring Quantity Max. 10 l Features - Powerful motor for stirring quantities of up to 10 l (H2O) - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns! - Exact temperature setting via digital display (LED) - Bushing according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5, enables precise temperature control - Digital error code display - Elevated control panel for protection against leaking liquids The IKA C-Mag HS 7 Magnetic Hotplate Stirrer features one stirring position with a maximum stirring quantity of 10 liters (H2O). It is equipped with a powerful motor with an output of 1.5 W and a speed range of 100 - 1500 rpm. The heat output is 1000 W, and it offers a heating temperature range from 50 to 500 °C. The set-up plate, made of chemical-resistant ceramic, measures 180 x 180 mm. The stirrer includes an LED temperature display for both set and actual values, a turning knob for heat control, and a fixed safety circuit of 550 °C. Additionally, it has a Hot Top indicator for safety and a bushing for connecting an external temperature sensor (ETS-D5). The dimensions are 220 x 105 x 335 mm, and it weighs 5 kg.

Benchmark Roto-Therm Plus Incubated Rotator Variable Speed w/ Tube Holders Benchmark’s new Roto-Ther (more)m series of incubated rotating mixers provide a wide range of mixing capabilities. Suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, histochemistry, hybridization etc, the mixers include interchangeable tube holders for accomomodating all common tube sizes from 0.5ml to 50ml. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing. For applications requiring temperature control, the Roto-Therm series can be digitally programmed to maintain chamber temperatures of ambient +5C to 60C and include an “in-lab” calibration function for ensuring accurate temperature control. The Roto-Therm is also available in a “Plus” configuration, providing the following additional features: Variable speed: 5 to 70rpm “Mix” function: Rotating in combination w/ oscillations (increased mixing) “Pause” function: Rotating with intermittent “stops” during rotation “Rock” function: Back and forth, gentle rocking motion (see-saw) Included tube holders hold capacities of 11 x 1.5/2ml, 5 x 5-7ml, 5 x 10/15ml, and 6 x 50ml with 24 x 0.5ml. The Plus model also offer an additional rocking platform (4.5 x 3 in.), as well as a 96 x 0.2ml tube/strip/plate holder for mixing PCR vessels in the “Mix” (oscillating) mode.Click Here to View Product Video INCLUDED: The Benchmark Roto-Therm Plus Incubated Rotator Variable Speed w/ Tube Holders includes: - Tube Holder, 11 x 1.5/2.0ml - Tube holder 5 x 5-7ml - Tube holder, 4 x 10-15ml - Tube holder, 6 x 50ml - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty