Life Technologies iBlot2

The redesigned Sub-Cell GT Electrophoresis Cell offers updated features that make electrophoresis ev (more)en easier. The Sub-Cell GT Ccell is the most versatile submerged horizontal electrophoresis cell in the Sub-Cell family. Because the Sub-Cell GT cell offers the greatest choice of gel lengths, sample combs, and separation modes, it is ideal for Southern and northern blotting protocols. Up to 30 samples can be resolved over a distance of 25 cm. Using four rows of combs, the cell will run up to 120 analytical samples. Cell size (WxLxH): 180 x 405 x 94 mm Gel tray sizes (OD) (WxL): 100 x 150 mm, 150 x 150 mm ReadyAgarose gels accommodated: No Sample throughput: 1 – 120 Base buffer volume: ~1 L Buffer recirculation: No Bromophenol blue migration: ~30 mm/hr (at 75 V) This electrophoresis power supply is recommended for basic applications such as submerged horizontal and mini vertical gel electrophoresis. It offers timer control and constant-voltage or constant-current output. Output range (programmable): 10 – 300 V, fully adjustable in 1 V steps 4 – 400 mA, fully adjustable in 1 mA steps 75 W (maximum) Type of output: Constant voltage or constant current with automatic crossover Output terminals: 4 pair recessed banana jacks in parallel Timer: 1 min – 99 hr 59 min, fully adjustable Pause/resume function: Yes Safety features: No-load detection, sudden load change detection, overload/short-circuit detection, overvoltage protection Input protection: Fuse on both hot and neutral Dimensions (WxLxH): 210 x 245 x 65 mm Weight: 1.1 kg

The redesigned wide Mini-Sub Cell GT Electrophoresis Cell offers updated features that make electrop (more)horesis even easier. The wide Mini-Sub Cell GT Cell is suited for multiple-sample, rapid-screening applications. This popular system has a wide platform that can separate 30 samples per comb. The wide Mini-Sub Cell GT Cell is the same width as the Sub-Cell GT Cell, so the comb holder, combs, and 15 x 10 cm gel trays are interchangeable with the larger Sub-Cell GT units. All wide Mini-Sub Cell GT Systems accommodate ReadyAgarose Precast Gels to save time and allow highly reproducible separations. The cells include a buffer tank, a safety lid with cables, and a leveling bubble. Cell size (WxLxH): 178 x 255 x 68 mm Gel tray sizes (WxL): 150 x 70 mm ReadyAgarose gels accommodated: Yes, wide mini and 96 Plus formats Sample throughput: 10 – 60 Base buffer volume: ~650 ml Buffer recirculation: No Bromophenol blue migration: ~4.5 cm/hr (at 75 V)

The nanoPAC Mini Power supplies are an ultra compact and economic unit ideal for use with DNA (Horiz (more)ontal) and Protein (Vertical) electrophoresis systems. With enhanced features, such as a maximum constant voltage up to 300 and maximum constant current output of 400mA. The nanoPAC’s user- friendly interface is easily adjustable in 1V and 1mA increments, making it perfect for separations where precise settings are required. Its ultra compact size and two pairs of parallel power terminals, which can run two electrophoresis units simultaneously, save time and bench space. Maximum Voltage: 300 V Maximum Current: 400 mA Maximum Power: 60 W Number of Output Pairs: 2

Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit Gel Dimensions (W x L) 6 x 7.5 cm Maximum Power  (more)Settings 300 V, 200 mA, 60 W Maximum Buffer Volume 325 ml Features - Color-coded and height adjustable combs—easily identify comb thickness at a glance and control well depth - Colored loading strips—for easy well detection when loading - Compact tank—reduces the buffer volume required to cover the gel, providing greater control over the voltage gradient and run-time - UV-transparent running tray—allows the user to image the gel without risk of damage due to handling - Side handles—for safe and easy transportation around the laboratory The Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit is a compact and efficient system tailored for routine nucleic acid preparatory and analytical electrophoresis. Designed for ease of use and consistent results, this unit can handle up to 32 samples per run, making it ideal for labs focused on high-throughput nucleic acid analysis. The SUB6 features a removable gel-casting tray with integrated silicone gaskets, allowing gels to be cast directly within the tank for a leak-proof setup. Equipped with color-coded, height-adjustable combs, the SUB6 enables easy comb thickness identification and precise control over well depth. The UV-transparent running tray allows users to image the gel without risking damage, while colored loading strips make well detection straightforward during sample loading. Its compact tank design reduces the buffer volume required, providing greater control over the voltage gradient and run time. Side handles ensure safe and easy transport around the lab, adding to the unit’s practical, user-friendly design. INCLUDED: The Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit includes: - Buffer Chamber Assembly - Safety Lid - High Voltage Leads - Running Tray with Silicone Gasket* - 1 mm thick, 8-well combs, 2 pcs - Colored Loading Strips - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hoefer SE600X Chroma Deluxe Dual Cooled Vertical Protein Electrophoresis Basic Unit Compatible Glas (more)s Plate Sizes (W x H) 18 x 16 cm or 18 x 8 cm Maximum Power Settings 1000 V, 500 mA, 50 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 18 x 16 cm - Gels are fully submerged for greater temperature equilibration - Produces straight lanes and sharp,well-defined bands - Run up to four gels (maximum 112 samples) at one time under identical conditions - Accommodates denaturing and native polyacrylamide gels, and the second-dimension of 2-D electrophoresis - Run gels at uniform temperature from 1 to 45°C - A wide array of accessories enables you to tailor gel configurations to your needs The Hoefer SE600X Chroma Deluxe Dual Cooled Vertical Protein Electrophoresis Basic Unit is an advanced, ergonomic system designed for efficient protein separation and gel handling. With dual cooling capabilities, the SE600X offers precise temperature control across fully submerged gels, resulting in superior temperature equilibration and sharp, well-defined bands. Accommodating glass plates up to 18 x 16 cm, this unit is ideal for labs focused on achieving high-resolution protein and nucleic acid analysis. Its flexible design supports a variety of applications, including denaturing and native polyacrylamide gels, as well as the second-dimension of 2-D electrophoresis. The SE600X can run up to four gels at once, allowing for simultaneous processing of up to 112 samples under identical conditions—ideal for high-throughput and comparative studies. With an array of accessories available, this system is easily customizable, enabling labs to configure gel setups tailored to specific research needs. Operating smoothly in standard lab conditions, it handles temperatures up to 45°C and humidity up to 80%, while power settings of up to 1000 V and 500 mA ensure reliable performance across diverse experimental setups. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber - Upper Buffer Chamber - Safety Lid w/High Voltage Leads - Heat Exchanger - Glass Plates 18 x 16 cm-6 pcs - Clamp Assemblies, 16 cm, 4 pcs - Cams, 6 pcs - Slotted Gaskets for Upper Buffer Chamber, 2 pcs - Dual Gel Casting Stand with Leveling Base - Bubble Level - Laminated Gaskets for Caster, 2 pcs - Buffer Dam - Spacer-Mate Alignment Template - Wonder Wedge Plate Separation Tool - Gel Seal - Combs, 15-well, 1.5 mm thick, 2 pcs - Spacers, 1.5 mm thick, 2 cm wide, 4 pcs INCLUDED: The Hoefer SE600X Chroma Deluxe Dual Cooled Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber - Upper Buffer Chamber - Safety Lid w/High Voltage Leads - Heat Exchanger - Glass Plates 18 x 16 cm-6 pcs - Clamp Assemblies, 16 cm, 4 pcs - Cams, 6 pcs - Slotted Gaskets for Upper Buffer Chamber, 2 pcs - Dual Gel Casting Stand with Leveling Base - Bubble Level - Laminated Gaskets for Caster, 2 pcs - Buffer Dam - Spacer-Mate Alignment Template - Wonder Wedge Plate Separation Tool - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Flexar Solvent manager from PerkinElmer See also Item No. 7689 (Flexar UV/VIS detector) on the image (more)s

Lab-Bubble Still Air PCR Enclosure - Black  BUB-PCR-SA-BLK This was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Polyscience 3370P9A11B Model 3370 Liquid-to-Air Recirculating Cooler with Positive Displacement Pump (more), 120V, 60Hz3D Visualization of the Polyscience Recirculating CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. This Liquid-to-Air Recirculator continuously pumps near-ambient temperature water from a reservoir to an external heat source, through a cooling radiator, and then returns cooled water to the reservoir. By blowing ambient air over the radiator, water flowing inside is cooled and the heat is exhausted into the atmosphere.Features An economical solution for applications where cooling fluid temperature is higher than ambient and temperature control is not required NOTE: No compressor. Uses fan cooling of cooling fluid Quiet liquid-to-air cooling Positive displacement or turbine pump Built-in low liquid level indicator INCLUDED: The Polyscience 3370P9A11B Model 3370 Liquid-to-Air Recirculating Cooler with Positive Displacement Pump, 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty