Leica AODS 20200-8 Laser Modulator Lab

LAUDA ECO Heating thermostat LAUDA ECO stands out for its range of features and ease of use. ECO the (more)rmostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that the regulation of the flow between inside and outside is also possible during operation. - The circulation pump can be adjusted on six levels - The ECO heating thermostats line includes transparent baths up to 100°C and stainless steel baths up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Temperature graphs on display - Convenient operation with softkey cursor - Mini USB interface Performance graph of the pressure pump on the six levels. TECHNICAL VISUALIZATION 1 Light sensor for automatic control of display brightness 2 Monochrome LCD display 3 Control panel (refer to following page) 4 Mains switch 5 Selector switch for dividing up the external and internal pump flow 6 Pump output for internal bath circulation 7 Pump output for bath circulation or connection to the pump connection set 8 Pt100 temperature sensor 9 Heater Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead

Bruker Microtof Bench Top ESI-TOF MS Lab This item was removed from a university where it was surplu (more)s to requirement. It is in reasonably good cosmetic condition, with some damage sustained to the casing as displayed. It powers on, but we are unable to conduct further at our facility. The power supply cable is included.

Baker Ruskinn Invivo2 400 Incubated Workstation Glovebox and Iconic Gas Control This system was remo (more)ved from a university lab where it was surplus to requirements. The unit powers up and has been temperature tested (thermometer not included).It is in good cosmetic condition internally/externally, with the display screen and internal light/socket in working order. The previous client has stated that it has a faulty O2 sensor, this was confirmed on-site during testing.Therefore, it is listed as Spares/Repair. Also includes; 2 x Power leads3 x Gas feed hoses1 x Data cable

This CBS Isothermal V1500-AB Series Liquid Nitrogen Tank was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in reasonably good cosmetic condition with only minor marks form use. We were unable to test it any further at our facility. Internal dimensions 53 x 53 x 88.5cm ControllerCBS 2301 Series

1x Dyno Mill Grinder KDL A1x Tricool chiller MINAC 005LTS These items were removed from a university (more) lab where they were surplus to requirements. Both items are in good cosmetic condition and power on, we are unable to test them further at our facility. Information from the client states both units are in working order.

THERMO SCIENTIFIC ClipTip 20 pipette tips Reference: Clip Tip 94410218 Without filter Packaging: 5 x (more) 96 tips / insert (refill tower) Volume (metric): 20 μl Expiry date: 10/2021 Quantity available: 34

Yamato MK-161-115V Compact Rotary, Elliptical, & Reciprocating Shaker, 115V Memory Capacity 4GB (more) Sampling Interval 1 MS to 1 Hour Time scale of waveform display 1 sec. to 24 hour /division Features - Compact, space saving design - Changeable rotary, elliptical and reciprocate motion for mixing, extracting and stirring of samples - Stable and high torque shaking power and speed with the DC brushless motor - Shaking frequency and timer are dial setting and digital display - Shake pause function, timer function and constant operation by one switch - Selectable mixing, extracting and stirring patterns when used with different shaking stage and racks (optional item) - Can be placed inside IN604W incubator for shaking incubation Compact and space-saving laboratory shaker in changeable rotary, elliptical and reciprocate motion for mixing, extracting and stirring of samples. Stable and high torque shaking power and speed with the DC brushless motor. Shaking frequency and timer are dial setting and digital display. Shake pause function, timer function and constant operation by one switch. Selectable mixing, extracting and stirring patterns when used with different shaking stage and racks (optional item). Can be placed inside IN604W incubator for shaking incubation. Shaking frequency 20~200 rpm. Shaking range 30mm. INCLUDED: The Yamato MK-161-115V Compact Rotary, Elliptical, & Reciprocating Shaker, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: flat polygonal sheet Nominal value: 500 mg Material: Stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database