Dry Block Heater HB1DG Ohaus

This Hewlett Packard 5890 Series II Gas Chromatograph was removed from a university lab where it was (more) surplus to requirements. The unit powers up, and the GC oven is functional. (Digital thermometer not included). We are unable to test further at our facility. It is in good cosmetic condition.

A laboratory oven with an exceptional quality/price ratio! 100% Made in Italy and with all accessori (more)es already included as standard.Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 300°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory Oven STF-N 52 FALC Natural Convection

MAS.1 R device is an electromagnetic weighing module of high resolution, equipped with R touch panel (more) featuring 5.7" display. The module is intended to be integrated into customer-owned weighing system. The compact design and integrated electronics make it possible to adapt the module into customer's technological line or to install it inside customers' device. In order to reduce the influence of ambient conditions on the measurement result which is a cause high measurement accuracy, it is recommended to install the module inside a draft shield for example. The module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 mg, Overload protection, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration.

Memmert BE300 incubator. Capacity 39 L. Max temperature: 70ºC. Stainless steel. 2 shelves. Inner gla (more)ss door. Ignition module: 3 indicators, fresh air regulator and manual ignition controller. Work control module: rotary controller and set for temperature and programs. Timer from 1 to 999 min. Overheating control and time self-diagnosis. RS232C. Dimensions (LHD): inner 480*320*250 mm, external 630*435*595 mm. Includes manual. Optimize your experiments with the Memmert BE300 Incubator, available at Galileo Equipment. Perfect for applications in microbiology, cell research, and stability testing, this oven offers precise temperature control and thermal uniformity. Its robust design and advanced technology guarantee consistent and reliable results. With ease of use and energy efficiency, the Memmert BE300 is the ideal choice for demanding laboratories. Buy now and take advantage of our exclusive offers to improve your laboratory performance with this high-quality oven!

IKA HRC 2 Lite Cooling and Heating Circulator Working Temp. -10 to 100 °C Pump Pressure Max. 0.35 ba (more)r Flow Rate Max. 18 L/min Features - Compact refrigerated and heating circulator with 400 W cooling and 1000 W heating capacity - Ideal for tempering bioreactors, laboratory reactors, and open bath solutions - Equipped with a stainless steel mesh filter for consistent long-term performance - Large working volume of 2.5 L reduces the need for frequent refilling - Natural refrigerant R290 ensures sustainability and environmental compliance - RS 232 and USB interfaces enable direct device-to-device communication - Control and monitoring compatible with labworldsoft® and other laboratory software - Illuminated sight glass for easy reservoir level monitoring The HRC 2 lite is a compact refrigerated and heating circulator designed to handle a wide range of laboratory tempering tasks with precision and efficiency. Boasting a 400 W cooling capacity and a powerful 1000 W heating output, it achieves temperatures from -10°C to 100°C with exceptional stability. Its robust design, featuring a stainless steel mesh filter and durable refrigerant R290, ensures long-lasting performance while meeting sustainability standards. With a spacious working volume of 2.5 liters and a low filling volume of just 1 liter, this circulator offers quick temperature adjustments and minimizes the need for frequent refilling. Designed for versatility, the HRC 2 lite is ideal for tempering bioreactors, laboratory reactors, open bath systems, and measuring devices. Advanced features like LED temperature display, PID control, and a safety circuit adjustable up to 110°C make it user-friendly and reliable. The integrated RS 232 and USB interfaces allow seamless device-to-device communication and compatibility with labworldsoft® and other software. Its compact footprint, illuminated sight glass, and powerful pressure/suction pump make it an efficient and convenient solution for diverse laboratory applications.INCLUDED: The IKA HRC 2 Lite Cooling and Heating Circulator includes: - 2 x Hose olives DN 8 - USB A-B Cable - Hexagon Socket Offset by Screw Key - Screwdriver for Safety Circuit - Warranty Card - Power Cord - Operator's Manual - Manufacturer's Documentation - Two Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Buehler Abrasimet 2 Abrasive Cutter 95.C/800.400 This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and has been connected to the pump. It is in good working order. It is in reasonable cosmetic condition with the expected kinds of marks from use for a piece of equipment like this. Model Type - 95.C/800.400SN - 495.MSC.1956 Metaserv Spindle Speed 3600 rpmDisc size - 250 x 1.5 x 32mm Disc Size: 250mm Arbor Size: 32mmWheel RPM: 2830 RPM Vice cutting capacity: 80mm - 75mm diameter Safety features: Emergency stop, safety switch, electronic break Coolant connection size: 12.5mm Drain size: 32MM ID 34MM OD Coolant tank size: 23 Litre Power: 3 PHASE - No neutral Dimensions: : 800 x 550 x 450 mm  Tank Container dimensions - L50 W36 H29cmThe lid with the pump doesn't fit the tank.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-39922 Disov3ry Paste Extruder ITEM-39923 Ci Robal SystemITEM-39924 Various CryotanksITEM-39925 Stuens Knuth Rotor ITEM-39927 Pyrex Freeze dryer chamber ITEM-39074 Eppendorf Minispin ITEM-39076 Sprout Centrifuge ITEM-39075 Start see-saw rocker SSL4 ITEM-39073 Capex 2dc ITEM-39930 Russel Hobbs MicrowaveITEM-39966 FisherBrand FB 70155 x 2 ITEM-39962 Nalgene Bottle x 2ITEM-39072 Gilson Pipet StandITEM-41032 2 x Boxes Gilson Pipetman kits ITEM-41042 2 x Boxes VWR Weigh BoatsITEM-41043 Mixed Miscellaneous plasticware ITEM-41044 Box of Thermo Scientific Nunclon PlatesITEM-41045 Applied Biosystems 96 Well Starter KitITEM-41046 4 x Mettler Toledo SensorsITEM-41047 Bio-Rad Bio-Dot ApparatusITEM-41048 Bio-Bin Pipet/Sharps Bins with Z stands ITEM-41049 Box of mixed assorted Plastic Syringes ITEM-41050 Box of mixed brand assorted plastic tubes/vials ITEM-41051 5 x Nalgene 1000ml Plastic BottlesITEM-41052 Pack of 4 Corning 500ml Centrifuge TubesITEM-41053 Corning 2L Erlenmeyer Flask ITEM-41054 Azlon 2000:20ml Plastic Flask ITEM-40939 IKA RCT basic Magnetic stirrer with heatingITEM-40940 Lafert D/351VM/7 Pump ITEM-40941 Lafert D/351VM/7 Pump ITEM-31370 Maps Trainer Telestrator System

Benchmark SureTemp Dual Convection 40L Incubator The new SureTemp Incubator series provides the high (more)est level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class. Each incubator is equipped with the SureCheck data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping. Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection” technology, allowing users to choose between mechanical convection mode or gravity convection mode. Mechanical convection incorporates optimally positioned heating elements in conjunction with an internal chamber fan to control the internal temperature. Gravity Convection eliminates any airflow from the chamber, relying solely on the heating elements and gravity to control the internal temperature. The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.INCLUDED: The Benchmark SureTemp Dual Convection 40L Incubator includes: - SureTemp Data Logging Software - Internal Power Outlet - 2 Stainless Steel Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Drummond Dialamatic Microdispenser 10 μL / Pipette model 210 Model 210 (pipette) volume : 10 μL 1 μ (more)L increment With 80 replacement tubes

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW