CSP IT-10 Infinity Turbine Organic Rankine Cycler

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

A laboratory oven with an exceptional quality/price ratio! 100% Made in Italy and with all accessori (more)es already included as standard.Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 300°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory Oven STF-N 52 FALC Natural Convection

MSE 4 x 200ml Swing-Out Rotor for Harrier 18/80R This item was removed from a university laboratory  (more)where it was surplus to requirements. The rotor is in good cosmetic condition and includes 4 x 200ml buckets. Specifications.- Maximum Speed: 6000 RPM. - Model: 43124-141 - Serial No.: B012R 9070

Biosafe Smart-Max AS-310 Automated Stem Cell Cyroprotectant System Lab This item was removed from a  (more)university where it was surplus to requirement. It is in good cosmetic condition and powers on, but the screen remains blank. Also, it fails to communicate with a PC and emits a burning smell. Therefore, it is listed as Spares/Repair.

ZEISS PALM CombiSystem Axiovert 200M, XE120-XL,HV-D30P w/ Parts & Accessories This was removed f (more)rom a university lab where it was surplus to requirements. The system powers up and the microscope is in good working order. We had some issues controlling the camera and the stage during testing, but this may be due to user error. With the Palm RoboSoftware V4 we can control the following microscope features: - Stage Y Axis movement - Stage X Axis movement - Objective Motor (able to select objective) - Increase/Decrease Light - Change Light Source - Raise/Lower Objective It is in excellent cosmetic condition with minor marks. Included are the following; Carl Zeiss Axiovert 200MModel: Axiovert 200MSerial#: 3820005950Objectives fitted:Zeiss Fluar 5x/0.25Zeiss Fluar 10x/0.50Zeiss LD Plan-Neoflaur 20x/0.40 CorrZeiss LD Plan-Neoflaur 40x/0.60 CorrZeiss EC Plan-Neoflaur 63x/1.25 Oil M27Zeiss EC Plan-Neoflaur 100x/1,30 Oil Eyepieces:W-PL 10x/23 (Qty.2) P.A.L.M Microlaser Technologies Model: PALM CombiSystemSerial#: CSC-01010Date: 2007 Fujitsu Siemens Celsius R630 PC, Fujitsu Siemens SCIENVIEW B17-2 C CI Monitor (QTY.2) Fujitsu Siemens Keyboard, MouseModel: Celsius R630Serial#: YKFU009307 Both Monitors, PC, Keyboard and Mouse are in good cosmetic condition and power on with no issue.PC has the following software installed:Palm RoboSoftware V4 Hitachi HV-D30 CameraModel: HV-D30PSerial#: 0675280 Laser Quantum LD3000 power supplyModel: ForteSerial#: 02165p                                                   Zeiss CryLaS FTSS 355-50Serial#: B594C279 Item powers on and is in full working order.Communicates with control panel and microscope. EXFO X-Cite Series 120Model: XE120-XLSerial#: 0570 Item is in good cosmetic condition.Item powers on with light source in full working order. All items listed above are sat on a Melles Griot Optical Table with PALM CombiSystem being fixed to it.Measurements and weight of Melles Griot Optical Table are as follows:Dx120Wx90Hx77cmWeight: Additional Parts & Accessories: Zeiss AdhesiveCap 500 ClearPALM MembraneSlidesPALM CombiSystem C User ManualsPALM DishHolder 50 CPALM MultiCap Insert 8cPALM MultiCap Collector D 8C (Qty.2)PALM CollectorSet SingleTube II 500PALM CombiSystem User manual (Qty.2)PALM RoboSoftware Software Guide (Qty.2)Laser Quantum Forte Operating ManualPALM MicroBeam Technical InformationZeiss Axiovert 200 Operating ManualZeiss DuplexDish 50 Sterile Packed (Qty.6)LumoxTM Dish 50 Hydrophilic, Sterile (Qty.5)Zeiss MembraneSlide 1.0 PenX-Cite In Control Series 120 User's GuideZeiss PALM RoboSoftware CDPALM MicroLaser System RoboSoftware 4.0 CDFujitsu Siemens Product Recovery CDCarl Zeiss 29 Software Release 4.6Zeiss Axiovert 200 M/Mat Floppy Disc3-CCD Color Camera Model HV-D30 Operating ManualFujitsu Siemens Celsius Drivers & Utilities CDScenview B17-2 CI / B19-2 CI

Embossed foil keypad for simple operation Short-spin function with pre-selected rotational speed rpm (more) or rcf settings as required (from 500 rpm in steps of 100 rpm) Timer up to 99 min or continuous run Soft key for gentle acceleration and deceleration Automatic imbalance detection Equipped with a Eppendorf F-45-30-11 fixed angle rotor. Rotor has a 30x 3,75 g capacity and a max rpm of 14000. Max. rotational speed: 14,000 rpm Max. load: 30 x 2.0 ml Safe-Lock Microcentrifuge Tubes Max. density of material to be centrifuged: 1.2 g/ml Max. kinetic energy: 6,100 Nm Dimensions (HxWxD): 228 x 310 x 430 mm Weight: 17 kg

F1 Mass Standard - knob weights with adjustment chamber. Nominal value - 500 g.

F1 Mass Standard - knob weights without adjustment chamber - set (1 g - 5 kg), plastic box Number of (more) pieces in the set: 16

M1 Mass Standard - knob weights - set (1 mg - 50 g), wooden box.

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.