CEM MDS-2100 Microwave Digestion System Lab

This Soxtec Avanti 2050 Auto Fat Extraction System was removed from a university lab where it was su (more)rplus to requirements. Included are; 1 x Foss Tecator 2050 Soxtec Avanti Auto Extraction UnitPart no. 10007330 1 x Foss Tecator 2050 Drive UnitPart no. 10007338 The item powers on with the drive unit supplying power and controlling the extraction unit. It was not tested further. It seems to be missing a control unit. The item is in reasonably good cosmetic condition with some marks from use.

Statebourne Bio 35 Nitrogen Dewar This item was removed from a university lab where it was surplus  (more)to requirements. It is in good cosmetic condition. We are unable to test it at our facility. Includes:- 6 x Metal Cylinders Double walled vacuum vessel.

An economic laboratory oven but complete with the necessary adjustments and safety devices. Fine tem (more)perature regulation, clear and complete display, top safety class, front regulation of the rear air inlet. Forced ventilation for a better temperature distribution and faster reaching of the set point. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel STANDARD:     PID thermoregulator with adjustable temperature up to 300°C     2 shelves     Rear 45 mm outlet with front device for adjusting opening/closing gap.     Safety class DIN 3.1 Microprocessor controlled Safety class DIN 3.1 (top DIN class) Laboratory Oven with forced ventilation STE-F 52 FALC

Nanocolor Quattro thermoreactor. Four constant temperatures: 70 / 100 / 120 / 148 °C. Capacity for 8 (more) round glass tubes of 14 mm ID (16 mm OD) and 2 reaction tubes of 22 mm external diameter possibility for the selection of 4 times: 1/2, 1, 2 hours and continuous operation. Safety mechanism to prevent overheating. Specifications:

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Vortex Top-Mix 94323 HEIDOLPH Type: REAX 2000 BIOBLOCK SCIENTIFIC Heidolph laboratory shaker, model  (more)REAX 2000. Technical specifications: 220 V, 50 Hz, 42 W. Speed: 200 – 2400 1/min. Agitator dimensions (ø): 2 cm. Agitator dimensions (D)x(H)x(B): 14.5 x 12 x 13 cm. Includes continuous and touch mode

This Copely Scientific HCP5 High Capacity Pump was removed from a university lab where it was surplu (more)s to requirements. The unit powers up and runs well. It is in good cosmetic condition with marks from use but is missing a foot. Accessories:1x DFM 2000 FlowmeterModel 4043 EThe unit powers on and is in good cosmetic condition.No further testing done 1x bag of 10mm PVC tubingCat No 5015 1x box of 6 Collection plates (28.3 ltr set)Cat No 8314 1x bag of 13 silicone rubber O rings for ACICat No. 8307 1x 5.6ml tubing 1 x Serial cable 1x Waste Shot Collector WSC2Cat No 18208The unit is in good cosmetic conditionNo further testing done 1x Base PlateCat No 19831 2x User Manuals:High Capacity Pump listFlow Meter List 1x Metal plate 1x plastic stand

Edwards EMF20 Oil Mist Filter NW25 The Edwards EMF20 Oil Mist Filter NW25 is designed for use with t (more)he Edwards RV12 and E2M18 vacuum pumps. The Edwards EMF20 Oil Mist Filter NW25 extremely efficient at 99.999% DOP test and azide proof. The bottom white half of the body is semi-transparent allowing easy monitoring of oil levels. INCLUDED: The Edwards EMF20 Oil Mist Filter NW25 includes: - NW25 Clamp - Centering Ring - O-Ring - NW25 to 3/4 inch BSP Adaptor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VACUUBRAND PC 511 Select Chemistry Pumping Unit Ultimate Vacuum 7 mbar (5 Torr) Maximum Pumping Spe (more)ed 1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - VACUU·SELECT vacuum controller with graphical user interface simplifies work in the laboratory - Predefined applications save time and give reproducible results - Easy-to-use application editor allows own process sequences - Powerful vacuum pump with excellent chemical and condensate compatibility - PC 511 select allows simultaneous operation of two independent vacuum applications The PC 511 select is an economical, compact solution for simultaneously running two independent vacuum applications with a single pump. Our popular MZ 2C NT two stage chemistry diaphragm pump is the heart of these pumping units, frequently used for medium-sized vacuum applications involving common solvents. With an intuitive, application-based interface, the VACUU·SELECT controller offers predefined vacuum processes for all common laboratory applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the electronically controlled port detects the boiling pressure and switches to two point control to hold pressure steady when a boiling point is detected. A second, manually controlled vacuum port permits simultaneous operation of a second vacuum application on the same pump. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection.INCLUDED: The VACUUBRAND PC 511 Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The AK-5/100 STENT automatic balance for stents operates with the readability of d = 0.1 μg. The  (more)device features a special working mode which makes it possible to analyse the change in sample mass during the technological process. Automatic Operation Automation of the weighing cycle, thanks to the elimination of an error being a result of the human factor, is a guarantee of measurement repeatability and accuracy impossible to be obtained in the case of manual weighing. Stent Container Automatic balance for stents, the AK-5/100 STENT, enables users to create identical test conditions for the entire stent series. With use of the stent container, the user can weight a series of 5 stents maximum, one by one, thus the necessity to place one stent on the pan each time is avoided. Accessories for Stent Weighing Weighing pan of custom design allows convenient weighing of 40 mm stents with a diameter of even 20 mm. A special applicator facilitates stent loading. Spacious Chamber and Ease of Operation In the weighing chamber there are perfect conditions necessary to enable highly precise weighing. The spacious chamber makes loading of the weighing pan with stents comfortable and uncomplicated. Measurement of Ambient Conditions in the Weighing Chamber The automatic balance for stent weighing, AK-5/100 STENT, is equipped with a high-class thermo-hygro-barometer allowing to test ambient conditions in real time with the accuracy of: ± 1 hPa (pressure) / ± 1.8% (humidity) / ± 0.1 °C (temperature).

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.