B.O.B Stevenson LTD 4047 MN 80355 Centrifugal Fume Extraction Fan Lab

Bunsen burner AES securos + pedal Category: SCU 6001000 nominal thermal load: 1300W Gas consumption: (more) 102g/h

Berthold Technologies Lumat LB 9507 Ultra Sensitive Tube Luminoter Lab This item was removed from a  (more)university where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Tecan RSP 5031 Robotic Sample Processor with Emka STC 8808 and IOS 3 This was removed from a univers (more)ity lab where it was surplus to requirements. All the units power up but have not been tested further. It is in good cosmetic condition with minor marks. It is made up of the following modules; 1x Tecan RSP 5031 Robotic Sample ProcessorS/N: 1652 JR 1x Emka STC 8808S/N: 00454 1x Emka IOS 3 S/N: 00371 1x Emka Switching UnitS/N: No serial number 1x Haake DC10 CirculatorType: 003-2859S/N: 1WDIN12879

Heraeus B12 incubator. Temperature range from ambient +5ºC to 70ºC. Heating time 40 min at 37 °C. 13 (more)1 L capacity. Natural convection. internal glass. Digital. Timer function to activate/deactivate the incubator. Stainless steel interior. Microprocessor control. 2 trays. Maximum load per shelf: 20 kg. Rear RS 232 port. External dimensions (LAF) 696*850*540mm; internal 552*610*390mm. weight 55 kilos User manual.emperature range from ambient +5ºC to 70ºC. Capacity 131 L. Natural convection. Internal glass. Digital. Microprocessor control. 2 trays. Manual. Features Specifications

MAS, the electromagnetic modules of high resolution are devices designed to be integrated into weigh (more)ing systems of the customer. Their compact design and in-built electronics stand for significant adaptation possibilities which guarantees that customer demands are met. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.1 mg, Overload protection, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration, The module housing features the following interfaces: RS232 and USB type B. The measurements can be carried out using the weighing pan or an under-pan weighing system – solution requiring the load to be suspended beneath the module. In order to prevent negative influence of the ambient conditions onto the weighing result, it is recommended to install the module inside the customer's device (e.g. in a draft shield). The MAS module comes standard with a dedicated power supply. Dedicated software Dedicated freeware, the R Panel, has been designed to enable control of the module via a computer. It provides access to all the keys and functions available directly from the operation panel, e.g. taring, zeroing, setup, etc. An innovative algorithm for automatic search of electromagnetic weighing modules is a guarantee for a remarkable ease of connection of a module to a computer. With R Panel software, the complete functionality of R series balances is available via PC . R Panel functionality has been implemented in RLab program as one of its numerous functions.

Grant Instruments BTA Dry Block Heating System for 24 tubes Easy and precise temperature setting Hea (more)ting range ambient + 5degC to 100degC, with rapid heat-up time Stability and uniformity +/- 0.1degC Capacity : 24 tubes of 15ml Compact, sturdy design

Memmert IPP1060ecoplus Peltier-Cooled Forced Circulation Incubator 1060L, 115V Temperature Range 0° (more)C (at least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1060L (37.4 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Visual and acoustic alarms for immediate alerting in abnormal conditions - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management - TwinDISPLAY offers maximum convenience for managing complex processes - AtmoCONTROL software included on a USB drive for easy programming and data management The Memmert IPP1060ecoplus Peltier-Cooled Forced Circulation Incubator 1060L, 115V epitomizes the pinnacle of efficiency and advanced technology in temperature-controlled cultivation. Enhanced with the TwinDISPLAY feature, this model offers unparalleled convenience and control for even the most complex processes. Powered by Memmert's advanced Peltier Technology, the IPP1060ecoplus not only sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based chambers, but also excels in rapid heat-up, cool-down, and recovery times, making it ideal for a variety of applications such as microbiological analyses, bacterial count determination, and accelerated aging tests for dairy products. This incubator achieves homogeneous temperature distribution, thanks to its sophisticated design which includes integrated fans within the Peltier elements for optimal temperature control and energy transfer. The completely sealed interior of the unit minimizes the risk of sample drying out and avoids condensation within the working chamber, with moisture forming externally on the Peltier element during the cooling process. The IPP1060ecoplus operates without a compressor, which saves valuable laboratory space and ensures that the operation is exceptionally quiet and free from vibrations. It is constructed from high-quality, corrosion-resistant stainless steel, ensuring both durability and ease of cleaning. The unit's user-friendly TwinDISPLAY allows for the intuitive control and seamless management of complex processes through the AtmoCONTROL software, which can be accessed via a USB drive for programming, managing, and transferring programs either through an Ethernet interface or a USB port. Multiple overtemperature protections, visual and acoustic alarms, and options for automatic email notifications enhance its safety features, making the IPP1060ecoplus a critical tool for laboratories seeking the highest efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1060ecoplus Peltier-Cooled Forced Circulation Incubator 1060L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The antivibration table has been designed to eliminate floor vibrations during the operation of indu (more)strial scales. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a large stone top and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure of the table is made of powder-coated steel, and the tabletop is made of MDF.

Labconco Refrigerated CentriVap Benchtop ConcentratorTheRefrigerated CentriVap Centrifugal Concentra (more)tor is designed to rapidlyconcentrate multiple small heat-sensitive samples, such as RNA and proteins,using centrifugal force, vacuum and controlled temperature. This exclusiveconcentrator combines a refrigeration system that cools to -4ºC with a heaterthat warms to 100ºC to achieve the user’s desired set point temperatures. Click Here to View Product Video INCLUDED: The Labconco 7310020 Refrigerated CentriVap Benchtop Concentrator, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty