Vacuubrand HP 40 B2 High-Vacuum Pumping Unit Hochvakuum-Pumpstand 10-6 mbar

Lowara E-SV 10SV18F075T Vertical Multistage Pump Lab This item was removed from a university where i (more)t was surplus to requirement. It is in good cosmetic condition, and powers on, we are unable to test it further at our facility. This item is fitted with 3-Phase 32amp plug.

Leybold Vakuum GMBH Trivac 016B Pump This item was removed from a university lab where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

VACUUBRAND PC 520 Select Chemistry Pumping Unit Ultimate Vacuum 7 mbar (5 Torr) Maximum Pumping Spe (more)ed 1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - VACUU·SELECT vacuum controller with graphical user interface simplifies work in the laboratory - Predefined applications save time and give reproducible results - Easy-to-use application editor allows own process sequences - Powerful vacuum pump with excellent chemical and condensate compatibility - PC 520 select allow simultaneous operation of two independent applications with electronic vacuum control This chemistry vacuum pumping unit is an economical, compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump. Based on our popular MZ 2C NT two-stage chemistry diaphragm pump, the PC 520 select is frequently used for medium-sized vacuum applications involving common solvents. Both vacuum ports have independent solenoid valves for electronic vacuum control, and check valves to protect against cross contamination and interference. With an intuitive, application-based interface, the VACUU·SELECT controller offers predefined vacuum processes for all common laboratory applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, it detects the boiling pressure and switches to two point control to hold the pressure stable when a boiling point is detected. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection.INCLUDED: The VACUUBRAND PC 520 Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VACFeatures -  (more)Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VAC is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA10A3T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C 2900W 230VAC SpecificationsPart NumberCA10A3T1-41AA1NCooling Capacity @ 20°C2.9 kWCooling Capacity @ 10°C1.93 kWCooling Capacity @ 0°C1.0 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate3.5 gpm / 13.2 lpmPower Requirements230V, 60HShipping Weight177 lbs / 80.3 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(9) { background-color: #fffacd; }

KNF LABOPORT SH 820 G IP30 Diaphragm Pumping System Ultimate Vacuum 6 mbar Maximum Flow Rate 20L/mi (more)n (1.2 m3/h) Protection Class IP30 Features - Ideal for extremely aggressive/corrosive gases and vapors - High level of vapor and condensate compatibility - Integrated gas ballast valve - Integrated rotational speed control - 3-color status display for in operation / stand-by / error - Compact, quiet and reliable - Inlet separator and outlet condenser for excellent solvent recovery - Start against ultimate vacuum of the pump - Modular expandable - 100% oil-free transfer - Environmentally friendly The KNF LABOPORT SH 820 G IP30 Diaphragm Pumping System is a chemically resistant vacuum pump system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high-performance condenser on pressure side. Based on the high level of vapor and condensate compatibility the system is perfectly suited for extremely aggressive / corrosive gases and vapors. INCLUDED: The KNF LABOPORT SH 820 G IP30 Diaphragm Pumping System includes: - 2 x Coated Collection Flasks - 2 x Flask Clamps - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF IP65 FEM 1.02 KT.18S Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit mo (more)st laboratory liquid metering and dosing needs. The FEM 1.02 TT.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: PVDF head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue.INCLUDED: The KNF IP65 FEM 1.02 KT.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: 2°C to 15°C Dimensions (HxWxD): 880 x 600 x 640 mm Internal dimensions (HxWxD): 7 (more)30 x 540 x 420 mm Capacity: 174 L

Maximum RCF with fixed angle rotor: 20913 x g Maximum RCF with swing-bucket rotor: 4500 x g Maximum  (more)RCF with plate rotor: 3486 x g Speed range: 200 – 14000 rpm Temperature range: -9 °C to 40 °C Maximum capacity: 4x 750 mL/4x MTP Acceleration/braking ramps: 10/10 Timer: 1 min to 99 min, continuous, short-spin Dimensions (WxDxH): 700 x 608 x 345 mm Weight: 99 kg Equipped with: 1x Eppendorf A-4-81 swing-out rotor (max 4000 rpm) 4x Eppendorf bucket 4x Eppendorf MTP carrier 4x Eppendorf insert (10x 15 mL falcon tube capacity) 4x Eppendorf insert (5x 50 mL falcon tube capacity)

Grant GD100 recirculating bath. Temperature 37 ºC. Bucket volume of 12 L. Digital thermostat. Visual (more) failure alarm. With cover. Includes user manual. The Grant GD100 immersion circulation bath is high-quality laboratory equipment that allows maintaining a constant and uniform temperature in liquid samples. With a capacity of 8 liters, this bath is ideal for a wide range of applications, from incubating cultures to preparing samples for laboratory testing. Equipped with a digital temperature controller and an efficient circulation system, the Grant GD100 bath ensures homogeneous heat distribution, resulting in higher precision in experiments. Plus, its compact and durable design makes it a reliable choice for demanding laboratory environments. Whether you work in scientific research, chemical analysis, or any other discipline that requires precise temperature control, the Grant GD100 Immersion Circulating Bath is an essential tool to help you achieve consistent and reliable results in your research.

Eppendorf 8 x 5ml Adapters, Cat. # 5804793005 The Eppendorf 8 x 5ml Adapters, Cat. # 5804793005 are  (more)for use with the Eppendorf S-4-72 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 8 x 5ml conical bottom Eppendorf Tubes each with the maximum tube dimensions (Diameter x Height) of 17mm x 60mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 8 x 5ml Adapters, Cat. # 5804793005 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 8 x 5ml Adapters, Cat. # 5804793005 SpecificationsBottom ShapeConicalRotor CompatibilityEppendorf S-4-72 Swing Bucket Rotor