PFEIFFER Turbomolecular Vacuum Pump TMH 262-005 w/TC100 Controller Lab

Pfeiffer Vacuum Diaphragm Pump MVP 015-2 This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and runs but has not been tested further. It is in good cosmetic condition with minor marks.

This Leybold TW 701 Turbomolecular Pump TMP was removed from a university lab where it was surplus t (more)o requirements. The unit is in good cosmetic condition with minor marks from use. The unit has not been tested as we do not have the correct controller to do so.

VACUUBRAND PC 620 Select Chemistry Pumping Unit Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumping (more) Speed 2.2 CFM at 60Hz Number of Heads/Stages 4/3 Features - VACUU-SELECT vacuum controller with graphical user interface simplifies work in the laboratory - Predefined applications save time and give reproducible result - Easy-to-use application editor allows own process sequences - Meets high vacuum requirements for most high boiling solvents - PC 620 select allows simultaneous operation of two independent vacuum applications with electronic vacuum control This chemistry vacuum pumping unit is an economical, compact solution for simultaneous operation of two electronically controlled vacuum applications with a single pump. Based on our popular MD 4C NT three-stage chemistry diaphragm pump, the PC 620 select is frequently used for vacuum applications involving even high boiling point solvents. This pump has sufficient capacity to run two demanding applications simultaneously. Both vacuum ports have independent solenoid valves for electronic vacuum control, and check valves to protect against cross contamination and interference. The integrated VACUU-SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU-SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, it constantly monitors the pressure and switches to a 2-point control mode to hold the pressure stable when a boiling point is detected. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage, and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection. INCLUDED: The VACUUBRAND PC 620 Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Pfeiffer HiCube 80 Neo, 63 CF, MVP 030-3 Turbo Pumping Station Final Pressure 1 x 10-8 hPa / 7.5 x  (more)10-9 Torr / 1 x 10-8 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 67 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 80 Neo, 63 CF, MVP 030-3 Turbo Pumping Station is a compact, high-performance system designed for all high vacuum applications. Featuring a user-friendly 7-inch touch display for easy operation, it also offers remote control via a web server. This versatile system is compatible with a wide variety of applications, delivering both reliability and robust performance in demanding environments. With a final pressure of 1 x 10-8 mbar mbar and a pumping speed of 67 l/s for nitrogen, the HiCube 80 Neo ensures efficient vacuum generation. The MVP 030-3 backing pump provides a pumping speed of 1.8 m³/h, with air cooling to maintain peak performance. Operating at a quiet ≤50 dB(A) and suitable for worldwide use, this turbo pumping station is an excellent choice for laboratories and industrial settings requiring dependable high-vacuum performance. INCLUDED: The Pfeiffer HiCube 80 Neo, 63 CF, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nXR120i NW25 Multi Stage Roots Dry Pump Ultimate Vacuum 0.03 mbar (0.022 Torr) Inlet Connect (more)ion NW40 Displacement 120 m 3h-1 Features - Reaches an ultimate vacuum of 0.03 mbar (0.022 Torr) for precise applications - Equipped with NW40 inlet and NW25 outlet flanges for flexible system integration - Maintains a leak tightness of < 1x10⁻⁶ mbar l/s for reliable vacuum integrity - Designed to fit under benchtops, optimizing laboratory space - Ensures a clean, oil-free operation, reducing contamination risks - Keeps the vacuum chamber free from dust, maintaining a clean environment - Seamlessly integrates into existing vacuum systems, ideal for OEMs - Offers design flexibility for R&D and industrial applications - Provides reliable vacuum performance over long periods, ensuring operational stability Edwards has revolutionised the vacuum pump market with the new nXRi high performance, compact dry pump. It delivers unrivalled pumping speeds in the most compact package, with pumping speeds of 30 to 120 m3h-1. The nXRi's lower input power and zero maintenance create real performance improvements and cost benefits across a range of applications.Analytical Instrument OEMs benefit from the ease of integration into most vacuum systems for a ready to go vacuum solution, perfect for mass spectrometry, electron microscopy and leak detection. R&D and Industrial customers will enjoy the design flexibility, oil-free and low maintenance features.Click Here to View Product Video INCLUDED: The Edwards nXR120i NW25 Multi Stage Roots Dry Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty

Edwards nXDS10iR Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. Unlike the standard nXDS10i, the Edwards nXDS10iR isdesigned for specialist applications such as gas recirculation, rare gaspumping and recovery or other applications where the dilution of the pumped gasis undesirable, or where sealing is integral to minimizing potential gas loss. Click Here to View Product Video INCLUDED: The Edwards nXDS10iR Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS10iR Dry Scroll Pump Technical Specifications Nominal rotational speed1800 rpmDisplacement12.7 m3h-1 / 7.5 ft3min-1Peak pumping speed11.4 m3h-1 / 6.7 ft3min-1Ultimate vacuum (total pressure)0.007 mbar / 0.005 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed7.5Maximum continuous inlet pressure200 mbarMotor power 1-ph280 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.8 kg / 57 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsSpecificationEdwards nXDS6iREdwards nXDS10iREdwards nXDS15iREdwards nXDS20iRNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.2 / 3.612.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

This unit is being sold on behalf of a client in Glasgow. This unit was a special commission inspire (more)d by the Glasgow Transport Museum. It is a unique, bespoke piece of furniture. It is in very good cosmetic condition. It has a very strong well made box section chassis, painted steel legs and the top structure is made of a mixture of woods. There are three good sized lockable drawers on the rear, with keys present. There are cable access points on the tabletops in both sections to allow cables to be run, from underneath, to any equipment that is to be used. The unit could be split into two sections to ease removal. The access to the building for removal is good with large doors and good parking. Viewing of the unit can be made with prior arrangements. This is a heavy item so a van with a tail lift is recommended. We estimate it is around 350 kg. DIMENSIONS :- 351cm (l) x 120cm (w) x 275cm (h). The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

This pack of tips was removed from a lab store as surplus to requirements. There are 20 packs of 96  (more)tips contained within each pack. Each pack is sealed and unused. Packaging20 x 96 tipsCompatibility96/300 Versette Pipetting HeadVolume (Metric)300μLFilteredFilteredSterilitySterileLength (English)StandardFor Use With (Equipment)Thermo Scientific™ Matrix Hydra DT, Thermo Scientific™ PlateMate Plus, Thermo Scientific™ VersetteProduct LineD.A.R.T.'SUnit Size-

Thermo Scientific Catalyst Express C500D Robotic Arm This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and was in good working order in manual mode, but there is no software included to operate it further. It is in good cosmetic condition with minor marks. Base Model: Catalyst Express F01229Base Serial#: RCE1006363Base Date: 2010 Arm Model: Catalyst-5 Robot Arm F01064Arm Serial#: RA51006712Base Date: 2010

Tecan ST Sunrise Remote F039300 Microplate Reader With software Year of manufacture: 2004 One of th (more)e plastic hinges of the upper flap (location of the microplate) is broken View the photo

A&D Weighing Apollo GX-224AEN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) Capacity 220 g R (more)eadability 0.0001 g Repeatability 0.0001 g Features - NTEP certified for compliance with legal-for-trade applications, ensuring reliable and accurate measurements in regulated environments - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Easily determine the minimum sample size to reduce waste and increase savings, plus alert users to ensure USP41 compliance - Simplify your daily precision check and SOPs with the standard deviation function - Set up repeatability testing and run automatic precision checks without external weights using Electronically Controlled Load (ECL) management - Reduce errors and damage with impact shock detection and overload protection - Eliminate static disturbance of samples with available fanless / touchless ionizer - The GX-AE series includes a touchless IR switch that activates the ionizer for a specified duration - Six simple and straightforward keys - A quick toggle to change between USB and RS-232C communication - Easily level the balance (even with gloves on!) the illuminated, front mounted level - Features a connector for integrating an external infrared sensor, facilitating touch-free operations and improving lab safety - Automatic self-calibration and one-touch internal/external calibration ensure valid results - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-224AEN Analytical Balance, 220 g, 0.1 mg (NTEP Class I), provides high-precision measurements with a 220 g capacity and 0.0001 g readability. This NTEP-certified balance ensures accurate, reliable results for regulated environments. It includes a fanless ionizer, standard in AEN models, which neutralizes static charges without contact, ensuring stable, disturbance-free weighing. An external IR sensor enables touch-free operation, preserving cleanliness and enhancing accuracy by allowing users to interact with the balance without direct contact. The Electronically Controlled Load (ECL) management system supports repeatability testing and automatic precision checks without external weights, further reinforcing measurement reliability. The GX-224AEN features a fast stabilization time of approximately 2.0 seconds, making it ideal for high-throughput settings where speed and accuracy are critical. Streamlining daily operations and ensuring USP41 compliance, this advanced tool alerts users when sample sizes fall below minimum weight, reducing waste and boosting efficiency. Impact shock detection and overload protection provide added durability, while six simple keys and a quick toggle function facilitate smooth switching between USB and RS-232C communication options for flexible data management. Enhanced usability features include an illuminated, front-mounted level for easy leveling, even with gloves on, along with automatic self-calibration and one-touch internal/external calibration to ensure valid results. An extensive range of measurement units, along with percent calculation and piece counting capabilities, add versatility for diverse scientific applications. With a robust design, NTEP certification, and advanced features like the IR sensor, the A&D Weighing Apollo GX-224AEN Analytical Balance is an outstanding choice for professionals seeking precise, regulated analytical capabilities. Backed by a five-year warranty, it promises both reliability and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-224AEN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) includes: - Touchless IR Switch - External Key Jack - Large Glass Breeze Break with Built-in Fanless Ionizer - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty