PFEIFFER Turbomolecular Vacuum Pump TMH 262-005 with TC100 Controller Lab

This Charles Austen Pumps Dymax 30 Vacuum Pump was removed from a university lab where it was surplu (more)s to requirements. The pump is in reasonably good, used cosmetic condition but it does have some ink stains and marks here and there. The pump powers up appears to suck and blow as it should but has not been tested with a gauge. The power light in the switch is slightly temperamental but this is very common for this type of switch. It doesn't affect the usage of the unit.

VACUUBRAND MD 1 Diaphragm Pump Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumping Speed 0.82 CFM a (more)t 60Hz Number of Heads/Stages 4/3 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Excellent ultimate vacuum - Whisper quiet and ultra-low vibration - Proven long diaphragm life, maintenance-free drive system The MD 1 diaphragm pump is an excellent choice for oil-free evacuation and pumping of non-corrosive gases down to 1.5 mbar ultimate vacuum. The three-stage design with precisely guided flat diaphragms provides outstanding pumping speed even close to the ultimate vacuum, especially when compared with similarly rated two-stage diaphragm pumps. The MD 1 is an ultra-low vibration pump with very long diaphragm lilfetime and stable ultimate vacuum documented with years of testing. With a flow path consisting of aluminum and selected plastics (diaphragms and valves made of PTFE/FKM and FKM, respectively) the pumps are suitable for a wide range of applications with non-corrosive gases. The MD 1 is an excellent choice for continuous, oil-free evacuation and pumping of non-aggressive gases. It is suitable for high vacuum requirements at modest gas flow as often needed in physics and analytics. The pump is exceptionally quiet and reliable with long diaphragm and valve lifetimes. With its low ultimate vacuum and compact dimensions the MD 1 is widely used as replacement of rotary vane pumps. Typical applications are exhaust gas analysis, for degassing of small amounts of viscous media and in particular as backing pump for compact turbomolecular drag pumps. Back diffusion of oil or even oil back flow, e.g., into a high vacuum chamber is excluded due to its oil-free operation. For equipment manufacturers customized versions are available.INCLUDED: The VACUUBRAND MD 1 Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Pfeiffer HiCube 300 Neo, 100 CFF, MVP 030-3 Turbo Pumping Station Final Pressure 1x10-8 hPa / 7.5x (more)10-9 Torr / 1 x 10-8 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 260 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 300 Neo, 100 CFF, MVP 030-3 Turbo Pumping Station is a compact, high-performance solution designed for all high vacuum applications. Featuring a user-friendly 7-inch touch display, it offers simple operation and remote control capabilities via a web server, allowing for versatile use across various demanding environments. With a final pressure of 1 x 10⁻⁸ mbar and a pumping speed of 260 l/s for nitrogen, this turbo pumping station ensures efficient and reliable vacuum generation. Equipped with the HiPace 300 turbopump and an MVP 030-3 backing pump, this unit provides robust performance with a quiet emission sound level of ≤50 dB(A). The air-cooled forced convection system maintains optimal operating conditions, and the unit is globally compatible with an input voltage range of 100-240 V AC. Weighing 22.5 kg, it is both sturdy and adaptable, making it suitable for a variety of applications in lab and industrial settings. INCLUDED: The Pfeiffer HiCube 300 Neo, 100 CFF, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF UN840.3FTP IP44 Diaphragm Pump Ultimate Vacuum 8 mbar (abs.) Maximum Flow Rate 34L/min (2.04 m3 (more)/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free TheKNF UN840.3FTP IP44 Diaphragm Pump is dry-running device used in a wide range of laboratoryapplications. They transfer, compress and pump down without contamination. Theheart of these very compact pumps is a KNF structured diaphragm. This patenteddiaphragm was stress-optimized using the Finite Elements method. As a result,KNF was able to make the pump smaller while increasing the service life of thediaphragm. This pump is 115V. INCLUDED: The KNF UN840.3FTP IP44 Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson MINIPULS 3 Peristaltic Pump Head, R1 Single Channel The Gilson MINIPULS 3 Peristaltic Pump He (more)ad, R1 Single Channel is a versatile pump head with a maximum flow rate of 40 ml/min and a minimum flow rate of 0.3 ul/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R1 Single Channel includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards XDS35iC Dry Scroll Pump Ultimate Vacuum 1 x 10-2 mbar Inlet Connection NW40 Displacement 43  (more)m3h-1 / 25 ft3min-1 Features - High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Features a pressurized oil system that lubricates pump shaft bearings and rotor sealing faces for reliable performance - Maintenance is simplified with an oil sight-glass for easy monitoring of oil levels and conditions at a glance - Facilitates easy oil changes with an oil drain plug that allows either gravity or pressure oil drainage for convenience - Compact, freestanding design allows flexible use without the need for additional support structures - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility Scroll pumps are an excellent alternative to rotary vane pumps where oil free pumping is desirable. The XDS pumps in particular use an innovative bearing shield to isolate the vacuum environment from all forms of lubricant not only making them totally dry, but also protecting the bearing from any process gases. Vapour handling is enabled by an adjustable gas ballast; this allows the range of pumps to satisfy many applications that were previously off limits to other scroll pumps. The Edwards XDS35iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards XDS35iC Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards XDS35iC Dry Scroll Pump Technical SpecificationsDisplacement 50 or 60Hz43 m3h-1 / 25 ft3min-1Peak pumping speed 50 or 60Hz35 m3h-1 / 21 ft3min-1Ultimate vacuum (Total pressure)1 x 10-2 mbar / 8 x 10-3 TorrMax inlet pressure for water vapour35 mbar / 23 TorrMax water vapour pumping rate – GB I70 gh-1Max water vapour pumping rate – GB II240 gh-1Max allowed outlet pressure0.2 bar gauge / 2.9 psig*Max allowed inlet and GB pressure0.5 bar gauge / 7 psigMotor power0.52kWPower connectorIEC EN60320 C19Nominal rotation speed1750 rpmWeight48 kg / 105 lbInlet flangeNW40Exhaust flangeNW25Noise level57 dB (A)Vibration<4.5mms -1 (rms)Leak tightness (static)<1 x 10-6 mbar ls-1Operating temperature range10 to 40 °C / 50 to 104 °FElectrical Requirements115/230V

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unparalleled functionality in a line of high performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Animal / Dynamic Weighing, Filling, Totalization / Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC, Statistics Screen 5.7 '' (145 mm) color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232 / Ethernet (accessories sold separately). GLP / GMP data output with real time clock. Construction Metal base, ABS top housing, stainless steel deck, front illuminated level indicator, weigh below hook, safety bracket , calibration lock, 4 touchless sensors, coverage in use Characteristics of the project Selectable environmental filters, auto tare, user selectable range calibration points, software lock and reset menu, user selectable communication settings and data print options, user definable project and user ID, standby automatic, up to 14 operating languages For further information and technical characteristics, download the attached data sheet.

Brady’s IP Thermal Transfer Printer is a smart solution for printing high-quality labels. The Brady  (more)IP Printer is a fully integrated and easy-to-use printer, label and software system. The printer, labels and ribbon communicate with each other using SmartCell technology. The system has several features such as material recognition, automatic formatting and easy-to-use features for printing labels, sleeves and tags. The Brady IP Printer detects when labels and ribbon are loaded and displays user information on the LCD screen. The label information is sent to the software, which automatically completes the template and settings. Create data in the template, then lock and print. Load, lock and print. Barcode type: Codabar, Codablock F, Code 128A, Code 128B, Code 128C, Code 39, Code 93, Deutsche Post Identcode, Deutsche Post Leitcode, EAN/UPC Extension 2, EAN/UPC Extension 5, EAN-13, EAN-8 , FIM, GS1 DataBar, GS1 DataBar Limited, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated, GS1-128, HIBC, Interleaved 2 of 5, JAN-13, JAN-8, MSI, Plessey, POSTNET, UPC- A, UPC-E, UPC-E0 Sensor material: Reflective sensor, Gap sensor Print technology: Thermal Transfer Print speed: 200 mm/s Resolution: 600 dpi Minimum label length: 5.1 mm Minimum liner width: 25.40 mm Maximum label width: 105.66 mm Maximum liner width: 106.68 mm Maximum labels per day: 5000 Maximum print width: 105.66 mm Maximum print length: 508.00 mm Maximum roll outer diameter: 203.20 mm Character styles: Arial, Courier New, Tahoma, Times New Roman, Trechuchet MS, Verdana Dimensions (WxHxD): 241 x 304 x 431 mm Weight: 5.9 kg

This item has just arrived in our stock. Please enquire for further details.

INTENDED USE THB-R PC software is designed to monitor and register indoor ambient conditions, wherei (more)n the said monitoring is based on data collected by measuring devices of Radwag production. Two THB software versions are offered: THB-R-Single – intended for integration with THB-3/2 ambient conditions module, THB-R-Multi – intended for integration with THB-R ambient conditions recorder. Overview THB-R PC software is responsible for establishing communication with measuring devices. It operates as a user interface intended for collected data presentation, archiving, reporting and for carrying out measuring devices setup. The software carries out constant readout of air temperature, relative air humidity, atmospheric pressure and vibrations. Additionally it calculates air density. Current metrological parameters values are demonstrated in a form of a time diagram, wherein the last 5 minutes are presented. The measurements may also be archived in a local database, MS Access format. The record takes place in a specified time interval. Database files are formed using one of four user-defined methods: daily, weekly, monthly, combination of all. THB-R-Multi version of the PC software enables record of measurements collected by THB-R Ambient Conditions Recorder. The stored data may be previewed and printed in a form of reports and diagrams. THB-R installation package comprises THB-Network Viewer allowing local network users to preview current indications of measuring units. Cooperation with measuring devices The software cooperates with measuring devices such as ambient conditions modules of RADWAG production. The modules are intended for operation with THB-R-Single or THB-R-Multi software version. Depending on the used device, communication between the software and the device may be established via RS 232 or USB interface. The latest software versions: THB-R-Single: v. 4.0.2 THB-R-Multi: v. 5.2.0.3