KNF Laboport N 86 KT.18 Vacuum Pump

Gilson MiniPuls 3 peristaltic pump Technical characteristics Voltage: 220-240V, 50/60Hz Power: 45VA  (more)Speed: 0-48 revolutions 8 channels Standard flow rate: 0.3 µL/min – 30 mL/min at maximum pressure 0.5 MPa Pump head speed: adjustable 0 to 48 rpm with increments 0.01 rpm to 9.99 rpm and increments 0.1 rpm to 10 rpm Standard model pipe diameter: 0.25–4 mm (ID) External dimensions (L) x (D) x (H): 15 x 17.5 x 29.5 cm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Varmeca gear pump Varmeca 37M

Spectrum Labs KrosFlo Research II Pump 900-1612 w/ MasterFlex Pump Head This was removed from a lab (more)oratory where it was surplus to requirements. The unit powers up but is missing its control interface, but it is operable. Included are; KrosFlo Research II Pump:Model No. 900-1612 MasterFlex Pump Head:Model No 900-1613 Tubing Sizes:L/S 13, 14, 16, 25, 17, 18 Accessories: 1x RS232 to Male DIN Cable: 2x Pairs of GripsMaterial: Plastic 2x ArmsMaterial: Metal The units are bolted to a metal plate attached underneath the unit. They are in good cosmetic condition and can be easily removed if necessary. 1x Misc GripMaterial: Aluminium The unit is in good cosmetic condition. 2x Arm Grips:Material Plastic The units are in good cosmetic condition. They hold position well against the metal upright arms. 

KNF UN842.3FT.40P IP44-T Diaphragm Pump Ultimate Vacuum 4 mbar (abs.) Maximum Flow Rate 34L/min (2. (more)04 m3/h) Protection Class IP44 Features - Pure transfer, evacuation and compression - Highly compatible with vapors and condensation - Chemically resistant flowpath - Suitable for highly aggressive or corrosive gases and vapors - Environmentally friendly - Maintenance-free The KNF UN842.3FT.40P IP44-T Diaphragm Pump features an integrated KNF self-drying system. Designed for a wide range of applications in laboratories, including vacuum drying of chambers (for drying or heat-treating substances and components) or steam sterilizers for sterilizing instruments, vessels, filters and textiles. The KNF UN842.3FT.40P IP44-T Diaphragm Pump can be used very universally due to its high resistance to aggressive media. The KNF self-drying system allows condensed liquid to be blown out of the pump heads at a high speed during evacuation. The drying cycle can be adjusted to the requirements of the individual process using three variables. The KNF UN842.3FT.40P IP44-T Diaphragm Pump is chemical-resistant, therefore suitable for highly aggressive or corrosive gasses and vapors. This pump is 115V. The KNF UN842.3FT.40P IP44-T Diaphragm Pump is brand new in box .INCLUDED: The KNF UN842.3FT.40P IP44-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson MINIPULS 3 Pump (Drive Unit) with Four Channel, Standard Flow Head (R4)Features - Utilizes po (more)sitive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds, makes the Minipuls 3 exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateMINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The MINIPULS 3 Pump (Drive Unit) with Four Channel, Standard Flow Head (R4) includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2010 Tested at 37°C and -2°C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

emergency shower

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Class M1 mass standards are versatile measuring tools characterized by their high precision and vers (more)atility in laboratory, industrial or commercial applications. Classified as M1 metrology class, they are valued for their versatility and accuracy in mass measurement. M1 mass standard: flat polygonal sheet Nominal value: 50 mg Material: nickel silver M1 Class Mass Standards – Key Features High-Level Precision - M1 class mass standards are designed to ensure precision in mass measurements. Permissible deviations from the actual mass are set with strict standards. Versatility of Applications - Characterized by versatility, M1-class standards are used in fields such as laboratories, industry, commerce and other areas requiring precise weight measurements. Measurement Stability - M1-class mass standards are stable over time, meaning that they maintain their measurement precision even despite prolonged use. This feature is especially important for tools that are used regularly. Operation in a Wariety of Ambient Conditions - M1 class mass standards are designed to cope with both laboratory, industrial and commercial conditions. Application 1. Analytical Laboratories In analytical laboratories where precise measurements are crucial, Class M1 mass standards are used to calibrate medium-precision balances. 2. Manufacturing Industry In the manufacturing industry, where product quality control is important, M1 class mass standards can be used to calibrate balances used in the manufacturing process. 3. Weighing Trade In the weighing trade, where measurement precision is required by law, M1 class mass standards can be used as a reference for calibrating commercial balances. 4. Testing Laboratories In research laboratories, Class M1 mass standards can be used to ensure precise weight measurements. Class M1 mass standards are versatile tools that are used in various areas of life. Their ability to adapt to different conditions makes this class of standards highly valued in the world of science, industry and commerce alike.

Eppendorf 15ml Conical Adapters for FA-45-6-30, Cat. # 5820717009 New in torn packaging Eppendorf 15 (more)ml Falcon/Conical Adapters for fixed angle rotor FA-45-6-30, Cat. # 5820717009. For use with 5804/R and 5810/R centrifuges. This is a two piece set, and the adapters are new in opened packaging. The Eppendorf15ml Conical Adapters for FA-45-6-30, Cat. # 5820717009 are discounted,brand-new, and includes a 6 Month Full Parts and Labor Warranty.