Heidolph ME1 Diaphragm Vacuum Pump

Laboport SD N 860.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automat (more)ic condensate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 60 l / min Final vacuum (max.) 4 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Centrifugal concentration Distillation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, base plate and two separ (more)ator bottles on the suction and pressure side. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive/corrosive gases and vapours. Technical features Flow rate (max.): 20 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5°C and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Filtration Degassing Vacuum oven Centrifugal concentration Qualitative characteristics Ideal for extremely aggressive / corrosive gases and vapors High compatibility with steam and condensate Integrated gas ballast valve Integrated control of the rotation speed 3-color status display for running / stand-by / error Compact, silent and reliable Chemically resistant compound vacuum system diaphragm vacuum pump, base plate and two separating bottles on the suction and pressure sides Modular; expandable 100% oil-free transfer - then pure transfer, evacuation and compression of gases High compatibility with steam and condensate Ecological Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Buchi Vac V-500 Diaphragm Vacuum Laboratory Pump Lab This item was removed from a university where i (more)t was surplus to requirement. It is in good cosmetic condition, powers on, and draws a vacuum, we are unable to test it further at our facility.

VACUUBRAND RC 6 Chemistry-HYBRID Pump Ultimate Vacuum 0.002 mbar (0.0015 Torr) Maximum Pumping Spee (more)d 4.1 CFM at 60Hz Number of Heads/Stages 2/2+2 Features - Reduced internal corrosion, even when working with corrosive vapors - Oil changes typically reduced 90% or more compared with rotary vane pumps alone - Most economical solution: In practical operation a cold trap is often no longer necessary - Ease of maintenance due to telescopic design The RC 6 chemistry-HYBRID pump is a combination of a two-stage rotary vane pump and a two-stage chemistry diaphragm pump for optimized corrosion resistance. The diaphragm pump maintains the oil reservoir under vacuum to keep the partial pressures of solvent vapors at levels below their condensation points and to reduce largely the concentration of oxygen and corrosive gases. Therefore, the RC 6 chemistry-HYBRID pump has a much higher solvent vapor pumping capability and resistance to aggressive gases than conventional rotary vane pumps. INCLUDED: The VACUUBRAND RC 6 Chemistry-HYBRID Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience CA10A3P2-41AA1N Durachill Chiller with Positive Displacement Pump, -10 to 70°C 2900W 230 (more)VACFeatures - Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA10A3P2-41AA1N Durachill Chiller with Positive Displacement Pump, -10 to 70°C 2900W 230VAC is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA10A3P2-41AA1N Durachill Chiller with Positive Displacement Pump, -10 to 70°C 2900W 230VAC SpecificationsPart NumberCA10A3P2-41AA1NCooling Capacity @ 20°C2.9 kWCooling Capacity @ 10°C1.93 kWCooling Capacity @ 0°C1.0 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate3.5 gpm / 13.2 lpmPower Requirements230V, 60HShipping Weight177 lbs / 80.3 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(8) { background-color: #fffacd; }

Edwards XDS35iE Enhanced Dry Scroll Pump Ultimate Vacuum 0.03 mbar (0.02 Torr) Peak Pumping Speed 3 (more)5 CFM (21 m3/h-1) Inlet Connection DN 40 ISO-KF (NW40) Features - Proven dry, clean vacuum solutions for a broad range of applications - Features smart drive technology for optimal global performance - Enhanced with double start scroll form technology and by-pass valves - Reduced peak power requirements at roughing pressures for efficient operation - Continuous higher roughing speeds to handle special application needs - High flow gas ballast feature allows pumping of vapours, including water vapour up to 240 gh-1 - Simple single-sided scroll design facilitates quick and easy maintenance - Offers up to 25% increased pumping speed at roughing pressures for frequent cycling - Equipped with DN 40 ISO-KF (NW40) inlet and DN 25 ISO-KF (NW25) outlet for effective connectivity The Edwards XDS35iE Enhanced Dry Scroll Pump represents a cutting-edge solution in dry, clean vacuum technology, suitable for a wide array of applications. This pump is equipped with double start scroll form technology and by-pass valves, enhancing the original XDS35i family by increasing the roughing performance and capacity for large volume evacuations. The pump's smart motor drive ensures consistent global performance, includes overload protection, and facilitates remote start/stop operations. A key feature is the high flow gas ballast, allowing the handling of water vapour and other vapours up to 240 gh-1. Maintenance is streamlined thanks to its simple single-sided scroll design, ensuring low ownership costs and maximum uptime. Additionally, the pump features reduced peak power requirements by up to 20% during initial pump down and provides up to 25% more pumping speed at roughing pressures, ideal for high frequency cycling applications. The pump achieves an ultimate vacuum of 0.03 mbar (0.02 Torr), which slightly increases with gas ballast usage, and offers a peak pumping speed of 35 CFM. It is designed with a DN 40 ISO-KF (NW40) inlet and a DN 25 ISO-KF (NW25) outlet, ensuring efficient connectivity and robust performance. Click Here to View Product Video INCLUDED: The Edwards XDS35iE Enhanced Dry Scroll Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Shaker microplate MX100-4A. Ideal for agitation of plates in ELISA. Agitation for 4 microplates. Va (more)riable speed from 200 to 1500 rpm. Timer from 1 min to 99h59min. Resolution: increments of 10 rpm. Brushless Motor. Orbit 3 mm optional Rack for 20 tubes of 1.5 or 0.5 mL.

Fast and Stable Measurement It only takes a second for the balance to display the final measurement  (more)result. Weighing Heavy Loads with High Accuracy On the large weighing pan of a PM balance, you can weigh a load of 120 kg with a readability of 0.2 g and second-to-none repeatability. Minimum Eccentricity Error Over the Entire Range PM balances can be used to determine the mass of irregularly shaped components with a centre of gravity that is significantly shifted from the weighing pan axis. Parameter Stability Over Time and After Transport The mechanical design is resistant and robust, allowing you to maintain the correct metrological parameters after transport and despite long and intensive use. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.01 g on the 200 x 185 mm weighing pan and with a readability of 0.2 g on the 500 x 400 mm weighing pan. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails New, lmproved The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. 5Y Terminal With Terminal 5Y you get a 10-inch display, Digital Weighing Auditor, multi-step user verification, ambient light alerts, hotspot, RFID*, live note voice and text notes, voice commands for the balance and handy measurement history within the handy library widgets Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Benchmark MC-24R Refrigerated High Speed Microcentrifuge without Rotor Speed Range 200 to 13,500 RPM (more) Max. Capacity 8 x 5ml Temperature -20°C to +40°C Features - The next generation touch control panel is user-friendly even with gloves - High-speed centrifugation reaches up to 13,500 RPM and 16,800 xg - Real-time RPM and RCF conversion ensures accuracy - Program storage allows saving up to 99 programs - Unique status indicator light shows the running, standby, or completed status - Compact design with a powerful motor drive reaches speeds up to 13,500 RPM - Refrigeration cools down to 4°C in less than 10 minutes - Quiet operation even at full speed Benchmark’s flagship MC-24R refrigerated microcentrifuge features a next-generation touch control panel, high-speed centrifugation (up to 13,500 rpm / 16,800 xg), and compatibility with the unique COMBI-Rotor™ (sold separately), which accepts both standard microtubes (1.5/2.0 ml) and PCR tubes/strips (0.2 ml), eliminating the need for a dedicated PCR strip/tube rotor. These features make it an ideal choice for any molecular biology laboratory. The MC-24R offers an optional hermetically sealed rotor and a four-place PCR strip rotor. It also includes adjustable acceleration/deceleration rates, real-time rpm and rcf conversion, program storage for up to 99 runs, and a status indicator light, which informs the user if the unit is running, in standby, or has completed a run. Compact and convenient, the MC-24R is perfectly suited to be the workhorse of any lab. INCLUDED: The Benchmark MC-24R Refrigerated High Speed Microcentrifuge without Rotor includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable High Flow Peristaltic Pump HeadFeatures - Utilizes (more) positive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds, makes the Minipuls 3 exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateGilson MINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable High Flow Peristaltic Pump Head includes: - Selected High Flow Peristaltic Pump Head - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty