Alcatel 2033 Vacuum Pump

This Pfeiffer Vacuum  Model - TMU 262 Turbomolecular Pump was removed from a university lab whe (more)re it was surplus to requirements. The unit has not been tested but is in good cosmetic condition with minor marks from use.

Hoefer VP200 Diaphragm Vacuum Pump for GD2000 Vacuum Gel Dryer Ultimate Pressure 9 mbar Max. Pumpin (more)g Speed(60 Hz) 1.2 cfm Rated Motor Speed at 50/60 Hz 1500/1800 rpm Features - Optimized for use with the Hoefer GD2000 Vacuum Gel Dryer - High resistance to water vapor, acid, and gel staining solution vapors - Dual vapor trap flasks to capture condensate at pump inlet and outlet - Easy-to-remove flasks with single clamp design for quick cleaning - Robust, user-friendly design requiring minimal maintenance - 180 W motor with overload cutout for motor protection - Quiet operation with sound pressure level of 41 dBA - IP 54 protection rating for enhanced durability in lab environments The Hoefer VP200 Diaphragm Vacuum Pump is designed for efficient, reliable gel drying on the Hoefer GD2000 Vacuum Gel Dryer. Engineered to withstand exposure to water vapor, acidic solutions, and gel staining vapors, the VP200 is both robust and highly resistant to corrosive conditions. This vacuum pump includes dual vapor trap flasks at both the inlet and outlet to capture condensate, which can be quickly removed for cleaning thanks to a single-clamp design. With a powerful 180 W motor and a quiet 41 dBA operation, the VP200 operates smoothly with minimal maintenance required. Its IP 54 protection rating and durable construction make it a dependable choice for rigorous lab environments. INCLUDED: The Hoefer GD2001 Vacuum Gel Dryer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VACUUBRAND MV 10C NT Chemistry Diaphragm Pump Ultimate Vacuum 0.9 mbar / 0.68 torr Maximum Pumping  (more)Speed 5.6 CFM at 60Hz Number of Heads/Stages 8/4 Features - Outstanding chemical resistance and superior vapor tolerance - Reduced process time due to very high flow rates even close to ultimate vacuum - Very low vibration and quiet - Excellent ultimate vacuum even with gas ballast - Excellent environmental friendliness due to efficient solvent recovery (on models with EK accessory) Four-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet the highest requirements. The four-stage design of the eight-cylinder pump MV 10C NT provides the advantageous combination of high pumping speed and very low ultimate vacuum of 0.9 mbar in a very compact design. All internal parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. Upgraded with an exhaust waste vapor condenser (EK) the MV 10C NT +EK provides an excellent, environmentally friendly system with efficient solvent recovery. A separator for the inlet (AK) made of glass (with protective coating) against particles and liquid droplets is available as an optional accessory. The high pumping speed and excellent ultimate vacuum of the MV 10C NT reduces the process time significantly. The pump meets the high vacuum requirements, e.g., of parallel processes in vacuum networks. Further typical applications are vacuum ovens, large rotary evaporators, pilot plants and mini plants as well as kilo laboratories. For rough operating conditions we recommend an inlet separator (AK) to protect the pump from particles and liquid droplets. The exhaust waste vapor condenser on the MV 10C NT +EK (also available as accessory) enables near-100-percent solvent recovery, efficient recycling, and active protection of the environment. INCLUDED: The VACUUBRAND MV 10C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND Chemistry Diaphragm Pump MD 1C Ultimate Vacuum 2 mbar Max. pumping speed at 60 Hz 0.88  (more) cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and ultra low vibration - Proven long diaphragm life, maintenance-free drive system Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet high requirements regarding ultimate vacuum. The three-stage construction provides the advantageous combination of high pumping speed and deep ultimate vacuum in a pump with a very small footprint. All parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. The MD 1C with gas ballast valve is optimally prepared for pumping easily condensable vapors (high boiling solvents). Three-stage chemistry diaphragm pumps are an excellent solution for applications involving corrosive gases and vapors at high vacuum requirements. Typical applications are vacuum generation at rotary evaporators, vacuum concentrators and many other laboratory applications. Due to their excellent ultimate vacuum they are the ideal solution for evaporation of high boiling solvents even with gas ballast. The MD 1C pump is the heart of a whole line of reliable chemistry pumping units.INCLUDED: The VACUUBRAND Chemistry Diaphragm Pump MD 1C includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Edwards nXDS20i Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases an (more)d bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. Click Here to View Product Video INCLUDED: The Edwards nXDS20i Dry Scroll Pump includes: - 1 Year Manufacturer's Warranty

Modules for HPLC DIONEX Ultimate 3000 DIONEX module set: Ultimate 3000 RS Variable Wavelength Detect (more)or VWD-3400RS AS50 Autosampler (AS 50) GP50 Gradient Pump ED50 Electrochemical Detector Wyatt miniDAWN Tristar Laser Light Scattering Photometer with Wyatt Comet WCT-01 Untested equipment

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

Brand: Leica Type: DM 2000 Objectives: Leica HI Plan 10x Leica N Plan 100x / 1.25 Oil Eyepieces: HC  (more)Plan 12.5x / 16 glasses M Revolver: 6-fold Table: Counter table serving R with ceramic inserts Condenser: Leica Abbe Clap Condenser 0.9 # 501183 Lighting: Built-in halogen 12V / 30W Details: egohead

Section thickness range: 0.5 – 100 µm Resolution: 0.5 – 5 µm: 0.5 µm 5 – 20 µm: 1 µm 20 – 30 µm: 2 µ (more)m 30 – 60 µm: 5 µm 60 – 100 µm: 10 µm Trimming thickness range: 5 – 500 µm Resolution: 5 – 10 µm: 5 µm 10 – 100 µm: 10 µm 100 – 200 µm: 20 µm 200 – 500 µm: 50 µm Specimen retraction during return travel: 60 µm Horizontal feed range: 28 mm Vertical specimen stroke: 64 mm Section counter: 5-digit, with reset Section thickness sum: 5-digit, with reset Remaining travel to front end position: 5-digit Specimen size: 55 x 50 mm Specimen orientation: x – and y – axes: universal 8°, rotation: up to 360° Dimensions (WxDxH): 410 x 520 x 280 mm Weight: 28 kg