VACUUBRAND VACUU-VIEW Vacuum Gauge

This Edwards PRM 10 Vacuum Gauge Head Part no. D021-66-000 was removed from a university lab where i (more)t was surplus to requirements. The unit is in reasonably good cosmetic condition but has some marks from use. It has not been tested. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

Varian CC2C Module Model-Sentorr This item was removed from a university lab where it was surplus to (more) requirements. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility. Specifications:- Model: Sentorr - Serial No.: LID30427

Edwards D39590000 ADC Active Digital Vacuum Gauge Controller, Standard Version, 1 Gauge Active Gauge (more) Compatibility APG Series (including 200, legacy APG, and APGX-H) & WRG Series (including 200 and legacy WRG) Display High brightness green LED display 12mm (0.47 in. high) Choice of Units mbar, Torr, Pa, Volts Features - Simply plug in the mains supply, connect the gauge, and the ADC displays the measured pressure - Supports Edwards gauges with a total measuring range of 2000 to 1 x 10⁻⁹ mbar (1500 to 7.5 x 10⁻¹⁰ Torr) - The ADC and Edwards gauges address a broad spectrum of laboratory and industrial applications - Bright LED display gives clear long distance readability - Displays in mbar, Torr, Pascal or Volts - Compact with small 1/8 DIN enclosure, may be panel or bench mounted - Push-button control makes operation highly intuitive The Edwards D39590000 ADC Active Digital Vacuum Gauge Controller is a streamlined and efficient tool for vacuum measurement, suitable for a range of laboratory and industrial applications. This compact controller features a bright LED display, providing clear readability from a distance, and simple push-button controls for ease of use. It is designed to automatically recognize and integrate with compatible Edwards gauges such as the APG200, WRG200, AIM200, and ASG2 ranges, loading the appropriate look-up table and displaying the pressure in commonly used units like mbar, Torr, Pascal, or Volts. The standard version of the ADC can display the pressure measured by a single active gauge. Its compact size allows for flexibility in installation, fitting easily into a small 1/8 DIN enclosure that can be mounted on a panel or positioned on a bench. To operate, simply connect the mains supply and attach the gauge to immediately begin pressure monitoring, making it a cost-effective choice for managing process vacuum. INCLUDED: The Edwards D39590000 ADC Active Digital Vacuum Gauge Controller, Standard Version, 1 Gauge includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VACUUBRAND VACUU-VIEW Extended Vacuum Gauge Upper Measuring Limit 1100 mbar/hPa (825 torr) Lower Me (more)asuring Limit 1 x 10-3 mbar/hPa (1 x 10-3 torr) Vacuum Sensors Integrated Features - Precision and chemical resistance in an exceptionally wide range from atmosphere down to 10-3 mbar, one gauge only for both rough and fine vacuum - Compact design with integrated sensors for useful setup in laboratory and process - The chemical resistant combination of ceramic diaphragm sensor and ceramic jacketed Pirani sensor ensures a long product life even with aggressive chemicals - Illuminated display, easy to read - Display with menu driven handling, easy to use e.g. for unit settings For the monitoring of your vacuum processes in the rough and fine vacuum range, the new vacuum gauges VACUU·VIEW extended are perfect! The heavy duty combination of ceramic diaphragm sensor and ceramic jacketed Pirani sensor ensures reliable readings in the wide range from atmosphere down to 10-3 mbar.INCLUDED: The VACUUBRAND VACUU-VIEW Extended Vacuum Gauge includes: - Kit Hose Nozzle DN 6/10 mm - Power Supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND DCP 3000 Vacuum Gauge with VSP 3000 Head Upper Measuring Limit 100 mbar/hPa (750 Torr) L (more)ower Measuring Limit 1 x 10-3 mbar/hPa (1 x 10-3 torr) Interface RS232C Features - Vacuum measuring device for connecting external vacuum sensors for measurements directly on the system - Flexible and expandable with up to eight sensors, four of the types VSK 3000 / VACUU·VIEW (Atm. to 0.1 mbar) and VSP 3000 / VACUU·VIEW extended (Atm. up to 10-3 mbar) - Relative pressure measurement with reference sensors (VSK 3000) and data logger function with up to 32000 measuring points (RS 232C) - Robust plastic / ceramic vacuum sensor VSP 3000 with high chemical resistance - VSP 3000 with a wide measuring range from atmospheric pressure to fine vacuum (10-3 mbar) thanks to the thermal conductivity measuring principle The fully electronic vacuum measuring device DCP 3000 is both versatile and decisive with its mechanical robustness, measuring accuracy and reliability. The large, illuminated display provides the measured value display of all connected sensors via an easy-to-use rotary control. Up to eight vacuum sensors (four of each type VSK 3000 / VACUU·VIEW and VSP 3000 / VACUU·VIEW extended) can be connected to the DCP 3000. The measurement can be carried out directly on the application. The DCP 3000 enables a relative pressure measurement (reference sensor VSK 3000) as well as working with pressure-dependent switching points by specifying switch-on and switch-off points on an external valve. The vacuum measuring device can also be used as a data logger with up to 32,000 measuring points. The data is read out via the serial interface (RS 232C). The vacuum sensor VSP 3000 is based on the gas thermal conductivity (Pirani) principle for the wide measuring range from atmospheric pressure to 10-3 mbar. Thanks to its structure made of chemically resistant plastics (PBT, PUR) and ceramics, it offers significantly higher chemical resistance and robustness compared to conventional Pirani sensors with fine wire metal filaments. Please also note our alternative product VACUU·VIEW extended.INCLUDED: The VACUUBRAND DCP 3000 Vacuum Gauge with VSP 3000 Head includes: - Power Supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND DCP 3000 Vacuum Gauge with VSK 3000 Head Upper Measuring Limit 1080 mbar/hPa (810 Torr)  (more)Lower Measuring Limit 0.1 mbar/hPa (0.1 torr) Interface RS232C Features - Vacuum measuring device for connecting external vacuum sensors for measurements directly on the system - Flexible and expandable with up to eight sensors, four of the types VSK 3000 / VACUU·VIEW (Atm. to 0.1 mbar) and VSP 3000 / VACUU·VIEW extended (Atm. up to 10-3 mbar) - Relative pressure measurement with reference sensors (VSK 3000) and data logger function with up to 32000 measuring points (RS 232C) - Capacitive ceramic diaphragm vacuum sensor VSK 3000 made of aluminum oxide with high chemical resistance, gas type independent absolute pressure Measurement - Excellent measurement accuracy, temperature and long-term stability The fully electronic vacuum measuring device DCP 3000 is both versatile and decisive with its mechanical robustness, measuring accuracy and reliability. The large, illuminated display provides the measured value display of all connected sensors via an easy-to-use rotary control. Up to eight vacuum sensors (four of each type VSK 3000 / VACUU·VIEW and VSP 3000 / VACUU·VIEW extended) can be connected to the DCP 3000. The measurement can be carried out directly on the application. The DCP 3000 enables a relative pressure measurement (reference sensor VSK 3000) as well as working with pressure-dependent switching points by specifying switch-on and switch-off points on an external valve. The vacuum measuring device can also be used as a data logger with up to 32,000 measuring points. The data is read out via the serial interface (RS 232C). The ceramic membrane vacuum sensor VSK 3000 is suitable for the measuring range from atmospheric pressure to 0.1 mbar. It measures regardless of the gas type and is highly chemically resistant, which means that the measurement can be carried out directly at the process, with excellent measurement accuracy and high long-term and temperature stability. Please also note our alternative product VACUU·VIEW.INCLUDED: The VACUUBRAND DCP 3000 Vacuum Gauge with VSK 3000 Head includes: - Kit Hose Nozzle DN 6/10 mm - Power Supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temperature range: 10°C above ambient to 220°C Temperature resolution: 0.5°C Temperature accuracy: 0 (more).5°C Max load per tray: 30 kg Max load total: 90 kg Capacity: 53 L Internal dimensions (WxHxD): 400 x 400 x 330 mm Dimensions (WxHxD): 550 x 680 x 480 mm Weight: 35 kg

High Capacity HRP Platform Wherever high readability and precision are important. Wherever good repe (more)atability in harsh industrial conditions matters. High Capacity HRP Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others High Capacity HRP Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Unbreakable High Capacity HRP Platforms feature a modern electromagnetic mechanism design in a sealed steel housing and overload protection. The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. High Capacity HRP Platforms are distinguished by a high degree of protection IP 67. For an additional charge we will make HRP platforms in Ex version, but in order for the device to work in explosive areas, you need to supply the PUE HX5.EX terminal. Use the potential High Capacity HRP Platforms work with one of two weighing terminals: PUE 7.1 or PUE HY10. The terminals’ software enables you to archive your work results, ensures data safety, and allows the platforms to work with powerbanks from our offer. In turn, you will select appropriate antivibration tables for the platforms, and thus increase the readability of your measurements.

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

IKA DB 4.8 Round Bottom Tubes Dry Block (35 mm)

Eppendorf F-35-6-30 Fixed Angle Rotor, Cat. # 022654306 The Eppendorf F-35-6-30 Rotor with lid accom (more)modates 6 x 15/50ml samples, reaching speeds up to 7,830 RPM with a max RCF of 71,970 x g. This fixed-angle rotor F-35-6-30 is for Eppendorf 5430 and 5430R centrifuges. INCLUDED: The Eppendorf F-35-6-30 Fixed Angle Rotor, Cat. # 022654306 includes: - Rotor Lid - Full 1 Year Parts and Labor Warranty Eppendorf F-35-6-30 Fixed Angle Rotor, Cat. # 022654306 SpecificationsMax Speed7830 RPMMax RCF71,970 x gMax Capacity6 x 15/50 mLRadius9.5 cmAngleFixed