Waters Xevo TQ-S Mass Spectrometer (2011) w/ PC & Mass Lynx Software Lab

For sale: Agilent G1960-61001 Control Board for LC/MS systems

The Pfeiffer GSD 301 is designed for manually controlled as well as automatic analysis of non-corros (more)ive and non-explosive gases. Gas flow range: 1 – 2 sccm Materials on the vacuum side: Capillary: Quartz Gas inlet: Stainless steel, FPM Orifice: Platinum Vacuum chamber: Stainless steel Analyzer: Stainless steel, copper, silver, gold, quartz glass, ceramics Turbo pump: Aluminum, stainless steel, epoxy, lubricant Tubing: Polyurethane, nickel-plated brass Diaphragm pump: Aluminum, nickel-plated brass, neoprene Ready for operation after: 10 min Dimensions (HxWxD): 400 x 280 x 720 mm Weight: 45 kg

Perkin Elmer Clarus 500 Mass Spectrometer This item was removed from a university where it was surpl (more)us to requirement. It is in good cosmetic condition and powers on. When powered on to test, the item began to emit an unpleasant odour. It is listed as Spares/Repairs.

Sequenom Agena MassARRAY Analyzer 4 System RS1000, PHX-1 & Accessories This was removed from a  (more)university lab where it was surplus to requirements. The system powers up and everything communicates but we were unable to test it further at our facility. The touchscreen on the nanodispense does not work, but we have replaced it with a monitor, mouse and keyboard. There is also a complete peripheral setup provided for the inbuilt PC in the PHX-1 system. Included in the system are; Sequenom Agena MassARRAY Analyzer 4 PHX-1Model: PHX-1Serial#: PX10060104 Sequenom Agena MassARRAY Nanodispenser RS1000Model: RS1000Serial#: 10P0413RS-01 The system also includes the following: Windows XP Software DiscNI Vision Deployment Engine for One UserMassARRAY Nanodispenser RS-1000 User's Guide v1.2.1WebPAM Software DiscFastTrak TX2300/TX4300 Quick Start GuideVarious Replacement parts (shown at end of slide)Various Plates for plate reader.

This Applied Biosystems Abi Prism Model 7000 PCR Sequence Detection System was removed from a univer (more)sity lab where it was surplus to requirements. This was removed from a university lab where it was surplus to requirements. The unit powers up and has passed all self-tests. It is in good working order. It comes with a Dell Optiplex PC, Keyboard & Mouse.The PC has a fresh install of Windows XP and it is running AB SDS 1.2.3. There is a 96-Well 5mm Thermal Cycler Block in it.

Atlas Copco GA18 Compressor Lab This item was removed from a university where it was surplus to requ (more)irement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The lab said it was functional prior to removal

VACUUBRAND ME 1C Chemistry Diaphragm Pump Ultimate Vacuum 100 mbar / 75 torr Maximum Pumping Speed 0 (more).5 CFM at 60Hz Number of Heads/Stages 1/1 Features - Convenient, quick and simple to use due to the new top-mounted power switch. - Whisper quiet and very low vibration. - Requires minimal benchtop space. - Maintenance-free drive system and proven long diaphragm life. - High chemical resistance. Vacuum filtration is one of the most common applications used for sample preparation in chemistry, microbiology, waste water control and other analytical processes. The ME 1C diaphragm pump offers a compact, high performance and easy-to-use solution which is perfect for single filtrations. This development, based on the highly successful technology of the oil-free diaphragm pump MD 1C, provides a well-proven and extraordinarily long diaphragm life time. The functional, space saving and innovative design with easily accessible, top-mounted power switch ensures convenient and quick operation for day-to-day lab work. Robust PTFE diaphragms and valves provide optimal chemical resistance. A manual vacuum regulator valve with dial gauge for adjustment of pumping speed and ultimate vacuum is available as accessory. One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors with a modest vacuum requirement. In contrast to water-jet pumps they do not consume water and therefore do not produce any contaminated waste water in daily use. Typical applications for the ME 1C are filtrations and solid phase extractions with solvents. At a process vacuum of 100 mbar, 90% of the atmospheric pressure is available as the driving force for the application. If a certain pressure difference must not be exceeded, the pump can be equipped with an optional manual vacuum regulator valve with dial gauge. It enables continuous adjustment of pumping speed and ultimate vacuum. INCLUDED: The VACUUBRAND ME 1C Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Mechanical Design Compliant with HACCP DWM HPX checkweigher is designed in accordance with ‚hy (more)gienic design’ requirements. Adoped solutions minimize potential spots where contamination can accumulate, and facilitate maintenance. Among these solutions there are: round-profile construction, no places accumulating contamination, fast disassembly of conveyors and belts requiring no tools, less flat horizontal surfaces on which contamination may accumulate, stainless steel mechanical design (AISI 304 or 316). Specially-designed gaskets, seal wires and shields guarantee IP69K ingress protection. Intended Use This series of checkweighers is intended for food industry, it is especially useful on fish and meat processing production halls. The applied solutions and materials are compliant with strict hygiene standards required for food production. Reinforced, hermetic construction allows to clean the device with pressure washer. Measurement Speed and Precision Mass measurement using DWM HPX checkweigher is carried out with up to 0.5 g readability, on an electromagnetic weighing module housed in a hermetic housing of IP69K ingress protection. Clear Information Layout The 12” display with a touch panel enables easy access to the main functions and clear presentation of the most important information during operation, e.g. current mass value, current statistics, production line throughput and function buttons. Databases The DWM checkweigher features an SQL database. The database stores lists of products, operators and measurement reports. Connectivity with Central Database System E2R software enables synchronization of local databases of particular weighing instruments with a central database. With this, it is possible to preview and manage data from the weighing system administrator’s computer. Compliance with Global Standards DWM HPX checkweighers have type approval certification compliant with the MID directive, and have passed tests carried out in accordance with OIML R51. The checkweigher software enables creation of different permission levels for operators, and registers operations carried out on the scale along with possible operator errors. Compliance with 21 CFR Part 11. The following functions are available to ensure compliance with the regulation: 10 permission levels for operators to be defined by the administrator, requirements for each operator's passwords (determined by the administrator: minimum length, upper-case letters and digits quantity, special signs quantity), the requirement to enter new password at first logging (the first password is entered by the administrator creating the account), determination of password validity period in days automatic logout after a specified time of inactivity operator lockout after 3 incorrect login operations; lockout time specified, unlimited account lockout after 6 incorrect login operations; the account can be unlocked by the administrator saving changes to Audit Trail file; detailed reports on all modifications carried out on the checkweigher (information on parameters modifications including previous and new values), adding information about modification reason. This applies to all operational parameters of the checkweigher, e.g. conveyors speed, enabling/disabling ejector, ejector settings modification, checkweigher start/stop, logging and data contained in all products, operators, weighings and reports databases. All login, start, stop operations and report generating are recorded.

Labconco SteamScrubber Glassware Washer, freestanding SteamScrubber Glassware Washers have stainless (more) steel top and bottom racks that accommodate basket inserts for a wide variety of beakers and other wide-mouth laboratory glassware. Specialized inserts for BOD bottles, petri dishes, culture tubes and small utensils make the SteamScrubber versatile. It can accommodate Upper and Lower Spindle Racks (for forced air drying see FlaskScrubber washers). Features Achieve higher water temperatures for enhanced washing, faster drying, and sanitizing LCD information center for customizing cycles and monitoring operations, including internal water temperature (C or °F) and alarms High water circulation rates for thorough cleaning: 96 gal./min. (363L/min.) when operated on 115V 60Hz, and 112 gal./min. (424L/min.) on 230V 50/60Hz Dual pumps: one for washing and one for draining, to reduce potential for cross-contamination Built-in purified water pump brings unpressurized or pressurized purified water into tank for up to six pure water rinses Built-in steam generator produces hot vapor to penetrate and remove dried residue for cleaner glassware Manual-fill dispensers for detergent (powder or liquid) or rinse aid solution Two user-set cycle programs User-set delayed start (up to 8 hours) Optional tempered safety glass viewing window with 25w interior light Environmentally Friendly: Item contains environmental attributes or features (e.g. water conserving, lead-free, etc.) as described in the item detail Click Here to View Product Video INCLUDED: The Labconco 402001000 SteamScrubber Glassware Washer, freestanding, 115V, 60Hz includes: - Upper and Lower Standard Racks - Leveling Feet x 4 - Screws x 2 - Hose Clamp - Drain Hose - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty