Thermo S4 S Series AA Spectrometer System, with VP 100 and ASX-520

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Perkin Elmer LS50B Luminescence Spectrometer was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but has not been tested further at our facility. It is in good cosmetic condition with minor marks from use.

This Secomam UVIKON XS UV/VIS Spectrometer was removed from a university lab where it was surplus to (more) requirements. The unit powers up but has not been tested further at our facility. It is in good cosmetic condition with minor marks from use.

Varian 660-IR FT-IR Spectrometer This item was removed from a university where it was surplus to req (more)uirement. It is in good cosmetic condition and powers on, it has been seen by an engineer with a summary of the report stated below. The beam splitters showing signs of moisture damage, and the unit has software recognition issues.As a result, it is listed as Spares/Repair.

Thermo Finnigan LCQ Advantage Mass Spectrometer Surveyor LC-MS System This was removed from a univer (more)sity lab where it was surplus to requirements. The lab confirmed that everything was in working order prior to removal. We have powered up everything but were unable to test further at our facility. All the units are in good cosmetic condition with minor marks. Included are; 1 x Thermo Finnigan LCQ Advantage Mass Spectrometer SystemSerial No. LAD00300 1 x Surveyor PDA DetectorPart No. SRVYR-PDA5Serial No. 56866 1 x Surveyor AutosamplerPart No. SRVYR-ASSerial No. 77269 1 x Surveyor MS PumpPart No. SRVYR-LPUMPSerial No. 62615 1 x Edwards 28 Vacuum PumpModel E2M28Serial No. 170517841 Supplied with:1 x Xcalibur LCQ Advantage Revision 1.3.1 x Xcalibur LCQ Advantage/DecaXP Revision 1.3 SP1.1 x Xcalibur Core Data System Software Revision 1.3.1 x Thermo MSQ 2.0 SP2 Instrument Control.1 x Thermo Xcalibur 2.1 W/Foundation 1.0.2 Rev.B.1 x Thermo Xcalibur LC Devices 2.4.0.2 x Thermo Xcalibur LC Devices 2.3.0 Software.1 x Thermo TSQ Series 2.1.1.1 x Thermo SurveyorPlus Manual Set.1 x Thermo Part No. 23043457 Start cable Integrator/Gtrace.1 x Thermo Part No. 23038071 Recorder Cable L=1900mm.1 x Emerson Industrial Automation Leroy-Somer Engine;2 x Spark Generators;1 x PULNIX 20mm CCD Camera;5 x Cables;3 x Spacer 7.7x3.2;1 x Spacer 6.3x3.2;2 x ThermoFisher Scientific Tubing Fused SI 150Ux390U;2 x Storer: TFS;1 x ThermoFisher Scientific Insulator Heater APCI;1 x O-Ring;1 x Plunger.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Increase your lab’s efficiency with the variable speed Thermo Scientific Tube Revolver / Rotator. A  (more)small footprint, flexible design and simple display help increase flexibility and effectiveness. Speed Range: 10 to 40 rpm Capacity combination of 4 paddles of: 7 x 10 to 15 mL tubes 7 x 5 to 7 mL tubes 15 x 1.5 to 2 mL tubes 21 x 0.5 to 0.8 mL tubes One paddle of 6 x 50 mL tubes Dimensions (LxWxH): 154 x 225 x 195 mm Weight: 1.2 kg Includes: Two 10/15 mL paddles Two 5/7 mL paddles Two 1.5/2 mL paddles Two 0.5/0.8 mL paddles One 50mL paddle Dimensions (HxDxW): 195 x 154 x 225 mm Weight: 1.2 kg

Edwards XDS5 Dry Scroll Vacuum Pump This system was removed from a university lab where it was surpl (more)us to requirements. The unit is in very good cosmetic condition and in working order. Specifications:- Serial No.: 46050723 - Code: A72401903XS - Running Hours: 29,726

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

The MW-04-2 mass converter is designed to be a component of construction of an industrial load cell  (more)scale. Depending on the needs, communication can be established via RS232, RS485. The MW-04-2 mass converter can connect with weighing indicators or the PC. It is equipped with Inputs/Outputs enabling independent control of some industrial processes, e.g.: dosing. One MW-04-2 mass converter allows to operate up to 4 weighing platforms. Construction: The converter is housed in a metal casing. Signal cables of the weighing platforms (4 pcs maximum) are fed through cable glands. RS232 is available on the M12 8P connector, RS485 may be fed through the PG11 cable gland. The device is equipped with an in-built power supply, this allows to power it directly from the mains. By standard the MW-04-2 mass converter supports 2 weighing platforms, optionally it can support 4. Area of use: Industrial load cell scales; Complex weighing systems supervised by computer system thanks to use of the Ethernet module; Connecting numerous weighing platforms to an industrial indicator; Dosing systems; Silo weighing; Discrete weighing (no weighing indicator) on a production line; Weighing in place with limited access, where instant readout of mass is not required, just record of weighings; Large embedded scales, where the converter is installed under the scale; Simple systems for chackweighing and result control Communication with the automation system due to an implemented MODBUS communication protocol. Indicator Software Functions: Designing formulas and dosing processes directly on the weighing indicator, Dosing and formulations (manual and automatic), Configuration of communication between formula making scales and actuators, Carrying out dosing and formulations on numerous platforms, Placing production orders for formulation (refers to PUE 5) with batches where the following is set: multiplier (quantity of formulation repetitions), source and target warehouse, user, scale. "Formulations" software makes use of the weighing indicators functionality to the maximum when it comes to their operation along with actuators, e.g. control of dosing valves. Additional advantage is the possibility to set an interrelated ingredient dosing on various platforms within one formulation process. Formulations and Dosing in the Industry: Industrial weighing indicators are designed on the basis of an innovative approach to formulation and dosing processes. Communication between the indicators and the modern MW-04 mass converters boosts the functionality of systems that realise both dosing and formulations. Communication interfaces enable placing the weighing platform and the indicator in a considerable distance one from another. Formulation process carried out using RADWAG indicators is highly popular in various areas of industry, the indicators enable either manual or automatic dispensing of many ingredients in accordance with a pre-defined formulation. Practically any product can be a formulation ingredient, either it is a loose material such as sugar, tea, grain, spices, powders etc. or liquid, this is possible thanks to appropriate automation. Compatibility with: PUE 5 Indicator; PUE 7.1 Indicator; PUE HY10 Indicator; PC.