Micromass Quattro LC Triple Quad Mass Spectrometer System & Gilson Modules Lab

Finnigan MAT LCQ Mass Spectrometer System This was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks Includes:1 x Spare System Control Board, ASSY No. 97000-61350 1 x Probe14 x instruction booklets relating to the system and usage

Waters Micromass Q-Tof micro Mass Spectrometer This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up but has not been tested further. We have been advised that it will require flushing out before it can be used. It is in good cosmetic condition with minor marks.

This Waters UPLC System with Flex Cart was removed from a university where it was surplus to require (more)ment. All units power up and are in good cosmetic condition, we are unable to conduct further testing at our facility. The system was last serviced in April 2019 by an Agilent CrossLab engineer. Included are; 1 x Walters Sample Manager with block heaterAppliance No. J0112Serial No. F05UPS 887N 1 x Waters Binary Solvent ManagerAppliance No. J0113Serial No. F05UPB 972M 1 x Walters Sample Tray 3 x data cables for computer connection3 X power leads1 x well tray with 96 compartments

Hiden Isochema Intelligent Gravimetric Analist+ DSMS Mass spec This system was removed from a univer (more)sity where it was surplus to requirement. All units power up and are in good cosmetic condition, we are unable to test the system further at our facility. The lab confirmed the system was working prior to removal. The system includes the following: Hiden Gravimetric Gas sorption analyserSN - HALIGA157Powers on, PC has MASsoft Professional Software installed. Hiden Analytical DSMS Dynamic Sampling Mass SpectrometerModel - HAS-301-414 PLSN/Ref - WR 12971 Hiden Analytical HAL301/3FSN - 3F2R-0/A/81447/E Edwards 1.5 PumpModel - E2M1.5Code - A371-32-919SN - 086277133 Vacuubrand Diaphragm Vacuum PumpModel - MD1SN - 31507705 Hiden Analytical Furnace Power ControllerPowers on Parts fitted:Hiden Analytical Model - HAS037001SN - 314001 Hiden Analytical Model - HA-092-0010SN - 310-003 Pfeiffer VacuumModel - TC600SN - 0829014257 Hiden Analytica Cryo Furnace Circulation UnitModel - HAS0221248SN - 314-001 Has 2 Vacuubrand Diaphragm Vacuum Pumps fitted and one spareModel - MD1 PC/Accessories:Dell Vostro 200Dell 19" Monitor & KeyboardIBM MouseAll Powers on Software discs:Hiden IGA Systems Software CD V2.148Hiden Analytical Software Suite v4.25Software USB - Has above software saved on usb Other accessories included:Blue case of screws & copper gaskets2 x Dilvac Dewar Flask & Containers 2 x 35cm1 x Dilvac Flask 12 x 23cmSmall Furnace - Model HAS0221267 - Unable to test Manuals:IGA Systems manualHiden Vacuum ManualsHiden MASsoft professional manual set

This Waters Xevo G2 Q-Tof LC-MS Mass Spectrometer is being sold on behalf of a university lab where  (more)it was surplus to requirements. The unit was serviced and then professionally decommissioned by Waters. The reports are available on request. The engineers who decommissioned it are on hand to recomission it once we have a buyer (location dependent). It is in excellent cosmetic condition with minor marks.

Varian 4000 GC/MS/MS Gas Chromatograph Included: Varian 3800 / 3380 MS4000 mass spectrometer Without (more) auto sampler Without Software Without a computer Untested equipment A few lines on the screen (see photos)

F1 Mass Standard - knob weights. Nominal value - 20 kg.

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database

IKA C-MAG HS 7 Digital Magnetic Hotplate Stirrer Speed Range 100 to 1,500 rpm Heating Temp. Range (more) 50 to 500°C Stirring Quantity Max. 10 l Features - Powerful motor for stirring quantities of up to 10 l (H2O) - Simultaneous digital display of target and actual temperatures via LCD display - Directly connection for a PT 1000 temperature sensor enable a precise temperature control (included in delivery) - Control accuracy in medium +/- 0,5 K (in combination with PT 1000) - Display of actual temperature value in medium with 0,1 K resolution when using PT 1000 temperature sensor - 3 operating modes to choose (standard, safe, adjustment protection) - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns! - Digital error code display - Elevated control panel for protection against leaking liquids The IKA C-MAG HS 7 Digital Magnetic Hotplate Stirrer is a powerful and precise tool designed for laboratory use. It features one stirring position with a capacity of up to 10 liters of H2O, driven by a robust motor. The LCD display simultaneously shows target and actual temperatures, ensuring accurate monitoring. It includes a PT 1000 temperature sensor for precise control, with an impressive accuracy of +/- 0.5 K. The hotplate offers a heating range of 50 - 500 °C, with a ceramic surface for excellent chemical resistance. Safety is a priority with a fixed safety circuit at 550 °C and a hot surface warning indicator. The elevated control panel protects against spills, enhancing durability and ease of use.

Eppendorf 4 x 18ml Adapters, Cat. # 022637622 New in box Eppendorf 4 x 18ml adapters (Cat. # 0226376 (more)22) for rectangular 100ml buckets for the Eppendorf 5804/R and 5810/R centrifuges. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 4 x 18ml Adapters, Cat. # 022637622 includes: - Full 6 Month Parts and Labor Warranty