Bruker Esquire 3000 Plus Mass Ion Trap Spectrometer Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis.  The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).

This Applied Biosystems Mariner Biospectrometry Spectrometer Workstation was removed from a universi (more)ty lab where it was surplus to requirements. All the parts are in good cosmetic condition but do have various marks and signs of general use. The unit powers up but makes a burning smell. It is sold for spares/repairs. The system consists of: 1 x Applied Biosystems Mariner Bispectrometry Spectrometer. Also comes with various extra parts;2 x Electrospray units.1 x Nanospray unit in a box with 2 x Genwac Cameras attached.1 x 'Electronics box' from old Mariner.1 x Bag of spare fuses.1 x Waste Bottle.

Finnigan MAT LCQ Mass Spectrometer System This was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks Includes:1 x Spare System Control Board, ASSY No. 97000-61350 1 x Probe14 x instruction booklets relating to the system and usage

The RAPIDLab 348EX Blood Gas System is the cost-effective solution for smaller laboratories tasked w (more)ith the challenge of performing fast-turnaround critical care tests. Fully-automated operation supports low-to-medium throughput on an easy-to-use analyzer that’s ready to generate accurate, on-demand results when clinicians need them, with a minimum of operator involvement.

Buchi Distillation Chiller B-741 Lab This item was removed from a university where it was surplus to (more) requirement. It powers on but is in poor cosmetic condition, we are unable to test it further at our facility. The unit is sold for spares/repairs as we believe it will need quite a bit of remedial action to get it working properly. It is missing one of is feet.

Ohaus Guardian 5000 e-G52HS10C-K1 Hotplate Stirrer, 120V Temperature Range Ambient +5°C to 500°C Spe (more)ed Range 50 rpm to 1,800 rpm Capacity 22 L Features - Heats and stirs up to 22 L for versatile lab applications - Temperature range up to 500°C with consistent heat control - 10 x 10 inch ceramic plate for even heat and stirring support - Speed range from 50 to 1,800 rpm for adaptable mixing - Digital display with high-contrast LCD for easy monitoring - Compatible with Ethernet, USB, and RS232 for data logging - Certified for safety with CE and TUV standards - Includes Pt1000 temperature probe and holder for precision The Ohaus Guardian 5000 e-G52HS10C-K1 Hotplate Stirrer, 120V, is engineered for high-performance heating and stirring, making it ideal for demanding lab environments. Its spacious 10 x 10-inch ceramic plate heats uniformly up to 500°C and can stir volumes up to 22 liters, offering flexibility for a wide range of applications. With a speed range of 50 to 1,800 rpm, this model supports both gentle and vigorous mixing, accommodating various sample needs. This hotplate stirrer features a high-contrast LCD display for clear visibility of settings, while Ethernet, USB, and RS232 connectivity enhance data logging and remote control. Safety-certified by CE and TUV, the Guardian 5000 includes a Pt1000 temperature probe and holder, ensuring precise temperature control. With a programmable timer that operates up to 99 hours and 59 minutes, this model is a reliable and versatile choice for laboratories prioritizing accuracy and adaptability. INCLUDED: The Ohaus Guardian 5000 e-G52HS10C-K1 Hotplate Stirrer, 120V includes: - 30500590 Temperature Probe - 30973298 Temperature Probe Holder - 1.5" (3.8 cm) PTFE Coated Stir Bar - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Scilogex MicroPette Plus Autoclavable Pipettor, 5-50ul Volume Range 5-50uL Adjustable or Fixed Volum (more)e Adjustable Volume Accuracy (±%) 0.60/0.90/2.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 5-50ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Adam Equipment LPB 623E Luna Precision Balance, 620g, 0.001g Capacity 620g Readability 0.001g Repea (more)tability 0.002g Features - Vivid, backlit LCD easily visible in any lighting conditions - Colour-coded keys facilitate quick recognition of the most frequently used buttons - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - Sealed keypad protects against dirt and spills - USB and RS-232 interfaces provide speedy communication with computers and printers - External calibration allows for verification and adjustment with weights ("I" models also feature internal automatic calibration) - Multilingual display permits use in various regions - Parts counting with preset sample sizes - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Selectable digital filtering for animal/dynamic weighing enables consistent results for moving subjects - Auto power-off to save energy The Adam Equipment Luna Precision Balances can meet the diverse weighing needs in a variety of labs, with numerous features and functions included. The Luna series offers improved performance for faster, more accurate readings. The Luna series also combines durability and performance in a stylish design, with an LCD that delivers results in large 24mm digits in white on a black background. Suitable for international use, Luna provides a useful multilingual text and display capability. RS-232 and USB facilitate data gathering and enable smooth communication with printers and computers. Designed to tolerate demanding lab tasks, Luna is constructed with easy-to-clean ABS plastic construction and a durable grade 304 stainless steel pan. The Luna Precision Balances are available in 20 different models that offer internal or external calibration, capacities from 220g to 15000g, and readabilities from 0.001g to 0.01g. INCLUDED: The Adam Equipment LPB 623E Luna Precision Balance, 620g, 0.001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty