Benchmark BSWNMR Block, 30 x NMR tubes

Perkin Elmer AAnalyst 600 Atomic Absorption Spectrometer Untested equipment Without a computer Witho (more)ut software

This Applied Biosystems Mariner Biospectrometry Spectrometer Workstation was removed from a universi (more)ty lab where it was surplus to requirements. All the parts are in good cosmetic condition but do have various marks and signs of general use. The unit powers up but makes a burning smell. It is sold for spares/repairs. The system consists of: 1 x Applied Biosystems Mariner Bispectrometry Spectrometer. Also comes with various extra parts;2 x Electrospray units.1 x Nanospray unit in a box with 2 x Genwac Cameras attached.1 x 'Electronics box' from old Mariner.1 x Bag of spare fuses.1 x Waste Bottle.

This Thermo Finnigan LCQ Deca XP Plus Mass Spectrometer was removed from a university lab where it w (more)as surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The main board and mains switch have now been removed and sold. Not all the cables/connectors etc were re-connected during re-assembly. The following other parts were also removed; - Power supply, Serial No: 9001305 008, Model No: SDS400-3628-1, SSI P/N: 20-0049-015N - Multifan 4394, GB-PAT: 2133082 2075288, ASSY by PAPST in Hungary   - Dynode FINNIGAN P/N: 97000-98042 REV-C  - Aux valve TYPE: DEMB3628028, S/N: 237085000104  - 5kV power supply 97000 10070C  - Ion Gauge   - LED front panel + 4 screws ASSY No: 97000-61400 REV-C  - Vent Delay PCB panel ASSY No: 97000-61370 REV-A It also comes with;1 x LCQ Hardware Manual.2 x Vacuum hoses with breeze hose clamps.Various other front assembly parts. This is sold for spares/repairs

This Thermo Spectronic Genesys 10 UV Spectrometer was removed from a university lab where it was sur (more)plus to requirements. This item powers on and is in good cosmetic condition, it has not been tested further. Percentage of lamp life used: 2.34%

This Millipore Direct Detect Spectrometer System was removed from a university lab where it was surp (more)lus to requirements. The unit has been fully tested and is in good working order. The system has been vacuum sealed and has had new desiccant added to keep the humidity low. It is in excellent cosmetic condition with minor marks from use. The unit is fully qualified.Laser.Source.Interferometer.Electronic.Automation..Detector.Have all passed the tests.The Performance Qualification is valid for 762 daysThe Operational Qualification is valid for 1120 days. 1 x Millipore Direct Detect main unit.1 x 24v PSU for the main unit.1 x Dell Optiplex 7010 PC with monitor, keyboard & mouse.Running a fresh copy of Windows 7 and the Millipore Direct Detect software.Ethernet cable & VGA cable.

Agilent / HP 1100 Series System With Spiderling Oven, 1100, Degasser, MSD This system was removed fr (more)om a university where it was surplus to requirement. All units are in good cosmetic condition and power on independently, we are unable to conduct further testing at our facility. The lab confirmed the system was working when last used in 2022. This system comprises the following: 1 x Spiderling oven -CS4000 1 x Agilent 1100 Automatic Liquid Sampler -G1313A 1 x HP 1100 Series Diode Array Detector -G1315A 1 x Agilent 1100 Pump -G1312A 1 x HP 1100 series Degasser -G1322A 1 x Agilent MSD -G1956B 1 x HP 1100 Series Solvent Tray-G1322A

THERMO SCIENTIFIC ClipTip 200 pipette tips Reference: Clip Tip 94410318 Without filter Packaging: 5  (more)x 96 tips / insert (refill tower) Volume (metric): 200 μl Expiration date: 10/2019 Quantity available: 1

4 IN / 4 OUT cable (PUE 7.1). Standard cable length: 3 m Compatible with: Scales operated via PUE 7. (more)1 terminal PUE 7.1 terminal

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Varied Standards: The set consists of 12 flat polygonal sheets and 15 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 pairs of tweezers, 2 brushes and 1 pair of gloves, facilitating precise and safe cleaning and handling of the standards. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.

Motic Moticam A8 Microscope Camera Highest Live Display Mode 3840x2160 Pixels (4K) Capture Resolutio (more)n 8MP Maximum Frames per Second (FPS) 30 FPS (15FPS @ 3840x2160) Features - Perfect solution for tiny structures and insights on other stunning preparations - Ideal for documentation and flexible image capturing - Provides higher resolution demanded by advanced technical training areas or education fields - Features state-of-the-art sCMOS imaging unit packed in a high quality metal housing - Fits microscopes with available C-Mount for 1 / 3" sensor size - Still image and video capture - Still image measurement - Image adjustments - White balance - Automatic and manual exposure - Individual objective calibration system The Motic Moticam A Series of microscope cameras are digital cameras ultimately developed and designed for newcomers in digital imaging and young explorers with ambitious goals. For this reason, the newest technologies are hidden in a robust metal housing. It’s simple to use without time consuming training, thanks to the MotiConnect application software. This A8 model of the Moticam A Series is a microscope camera capable of delivering up to 15 frames per second at 3840x2160 pixels per frame, or up to 30 frames per second at 1920x1080 pixels per frame. With its higher resolution capability, the A8 is also ideal for documentation and flexible image capturing. Time is precious and limited. For this reason alone, the Moticam A Series is easy to install and ready for immediate use. When Motic promises all-in-one, they mean that all accessories are included. A calibration slide, eyepiece adapters for any eyepiece tube, a focusable lens and even a macro tube is part of the package. The all-in-one solution for a headstart is the Moticam A Series. The MotiConnect is a free multi-platform toolbox to make the most out of your new Moticam A Series product. Capture, annotate, measure and evaluate using simple to understand and easy to use tools. This free software can also be enhanced by purchasing the more advanced Motic Images Plus 3.1. Click Here to View Product Video INCLUDED: The Motic Moticam A8 Microscope Camera includes: - 30mm and 38mm Eyepiece Adapters - Calibration Slide and Card - C-Ring - Focusable Lens - Macro Viewing Tube - Dust Cap - Power Cord - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The MEDICA Pro range is specifically designed to meet the water quality needs of high performance, h (more)igh volume single or multiple Clinical Diagnostic Analyzers. The system delivers 4 l/min of CLSI CLRW water with up to 60 l/hr productivity to meet your analyzer requirements. The single system design incorporates all the water purification components. excl. new filters