Agilent Cary Eclipse Fluorescence Spectrometer

This listing is for a Agilent Eclipse Fluorescence Spectrometer. The unit is in full working conditi (more)on and is ready for immidate realese. Supplied with cables, software disk, License key,spare diffuser and Neutral density attenuator. The Agilent Cary Eclipse fluorescence spectrometer is sensitive, accurate, and flexible. Ideal for use as a routine fluorometer, the Cary Eclipse can easily be switched between fluorescence, phosphorescence, chemiluminescence, and bioluminescence measurements. Additional flexibility can be achieved through various accessories, including temperature control and solid sample handling, automatic polarizers, and a microplate reader for high sample throughput. Type:Benchtop fluorescence spectrometer Control Software :Cary WinFLR Light Source:Xenon flash lamp (80 Hz) with 10-year warranty on new instruments Maximum Scanning Speed :24,000 nm/min Modes of Operation:Fluorescence,Phosphorescence,Chemiluminescence,Bioluminescence,Time resolved phosphorescence. Power Requirements:100-240 VAC, 50/60 Hz Spectral Bandwidth Emission: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Excitation: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Wavelength Accuracy:± 1.5 nm Wavelength Range:Operational emission: 200 - 900 nm Operational excitation: 200 - 900 nm Depth:644 mm Height:271 mm Weight:30 kg Width:608 mm

Hersteller: Horiba Modell: Duetta Beschreibung: Duetta™ ist ein 3-in-1-Spektrofluorometer, das die F (more)unktionen von Fluoreszenz- und Absorptionsspektrometern gleichzeitig vereint. Dank des eingebauten Hochgeschwindigkeits-CCD-Detektors kann das Duetta ein komplettes Spektrum von 250 nm bis 1.100 nm in weniger als einer Sekunde aufnehmen und ist damit das schnellste Fluoreszenzspektrometer auf dem Markt. Kernmerkmale: - Drei-in-Eins-Fluoreszenz- und Absorptionsspektrometer - UV-Vis-NIR Fluoreszenzdetektion Wellenlängenbereich von 250 bis 1.100 nm - Vollständige 3-D-Fluoreszenz-EEM-Akquisition in weniger als einer Sekunde - Klassenbeste Fluoreszenz-Empfindlichkeitsspezifikation von 6.000:1 RMS für Wasser-Raman - Automatische Korrektur für primäre und sekundäre Innenfiltereffekte (IFE) - High Fidelity Molecular Fingerprinting mit der einzigartigen A-TEEM™ (Absorbance-Transmittance Excitation Emission Matrix) Technologie - Millisekunden-CCD-Detektion des gesamten Fluoreszenzspektrums Sonstige Daten: Erfassungsmodi: Absorptions- und Fluoreszenzspektrometer Fluoreszenz-Empfindlichkeit: Wasser-Raman SNR >6.000:1 RMS, 350 nm Anregung, 5 nm Schlitze Spektrale Erfassungsrate: 510.000 nm/min EEM-Akquisitionsrate: Bis zu 1 Sekunde (proben- und wellenlängenabhängig) A-TEEM-Akquisitionsrate: Bis zu 30 Sekunden (proben- und wellenlängenabhängig) Fluoreszenz-Detektor: CCD/Spektrograf Fluoreszenz-Detektorbereich: 250 bis 1.100 nm Fluoreszenzbandbreite: 1, 2, 3, 5, 10, 20 nm (Anregung und Emission) Lichtquelle: 75 W Xenon-Bogenlampe. Spezielle Kassette für Snap-in-Austausch Wellenlängenbereich Anregung/Absorption: 250 bis 1.000 nm Absorptionsdetektor: Silizium-Photodiode Absorptionsdetektorbereich: 250 bis 1.000 nm Absorptionsbandbreite: 1, 2, 3, 5, 10, 20 nm Absorptionsbereich: 0 bis 2 A Absorptionsgenauigkeit: +/- 0.02 A Wellenlängen-Genauigkeit: +/- 1 nm Computer-Anforderungen: Windows 10 oder 11 64-bit OS, Laptop oder PC mit mindestens 1 USB-Anschluss (mehr für zusätzliches Zubehör) Software: EzSpec™ Abmessungen: (B x T x H) 17 x 20,4 x 14,4 Zoll; 43,18 x 51,816 x 36,576 cm Gewicht: 45 Pfund; 20,4 kg Das hier angebotene Gerät/System wurde getestet und ist voll funktionsfähig und einsatzbereit.

The Thermo Finnigan LCQ Mass Spectrometer System is a powerful and compact benchtop mass spectromete (more)r for LC/MS/MS. The Finnigan LCQ, equipped with Xcalibur software, permits in-line acquisition and integration of HPLC dual-wavelength absorbance data along with mass spectral data. WideBand ActivationTM a standard feature on the Finnigan LCQ-DUO applies resonance excitation energy that fragments the molecular ion and any product ion up to 20 amu less than the precursor ion. This is important because hydroxylated compounds frequently only show the loss of a water molecule in an MS/MS spectrum giving little structural information. Wideband Activation provides spectra with greater structural information and is invaluable for MS/MS library building, high-throughput screening and quantization experiments. Specifications include: AC Input: V 230, Hz 50/60, A 10.0 Max     Mech. Pump: V 230, Hz 50/60, A 5.0 Max     Model: LCQ

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

CABINET FIRE Series MY11 Gray 60 BASIC - CHEMISAFE - Entirely made of 1 - 1.5 mm thick electrogalvan (more)ized sheet steel, cold bent - Gray RAL 7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to standard 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded cabinet - Adjustable leveling feet - Door with lock and key - 3 shelves in painted steel (BASIC series) or in stainless steel (EASY series) adjustable in height, 1 retention tray with grid - Shelf fixed with aluminum pins, excluding all risk of sparks - Shelves tested for fire resistance - ISO 3864: Signs with pictograms - Certified with fire resistance 90 minutes, according to the EN14470-1 BV standard (Bureau Veritas) - Certified according to the EN16121 BV standard (Bureau Veritas) - Easy replacement of spare parts in case of damage - Available in the version with double capacity and external dimensions WxDxH: 200x600x1950mm Supplied: - 3 painted steel shelves (max load 60 kg evenly distributed) + 1 pan with grid (capacity 20 litres) - Door hinge on the left, on request on the right Optional: - Shelves - Timer - Open door alarm - Ventilation - Electric aspirator - Activated carbon filter - Cooling system - Internal carbon dioxide system with automatic thermal activation (62°C)

Boekel Scientific 301200 Small Platelet Agitator The Boekel Scientific 301200 Small Platelet Agitato (more)r is designed for continuous quiet operation and to meet mixing requirements in the storage of platelets. For use with Boekel Scientific Platelet Incubator. Easy sliding and removable agitator shelves Rotation Failure alarm if not connected to Boekel Platelet Incubator Non-slide feet to alleviate unit walking on the bench as well as for placement within the Boekel Platelet Incubator Click Here to View Product Video INCLUDED: The Boekel Scientific 301200 Small Platelet Agitator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Rotating Mixer with Rotisseries Speed Variable, 1 to 40 RPM Tilt Angle Variable, 0° to 9 (more)0° Timer 1 sec to 99 hrs 59 min, continuous Features - Variable speed control: 1 to 40 RPM. - Adjustable tilt angle: 0° to 90°. - Capacity: 12x50ml, 20x15ml, 48x2.0ml tubes. - Three rotisserie tube holders included. - Rubber-coated holders for stable mixing. - Reversing mode for thorough mixing. - Size: 8.25 x 10.5 x 12.5 in (21 x 27 x 32 cm). Your browser does not support the video tag. The Benchmark Rotating Mixer provides gentle to vigorous mixing of laboratory samples up to 50ml. With adjustable speed control and tilt angle, the Rotating Mixer is ideal for a variety of applications, from mixing blood samples to the preparation of homogenous dispersions. Three rotisserie tube holders are included for mixing all common laboratory sample tubes and each individual tube holder is rubber coated to provide a secure grip, preventing any “wobble” or loosening during mixing at high speeds. For more intense mixing, a unique reversing mode is available. In reversing mode, the mixer rotates for up to 360° then stops and rotates in the reverse direction. This back and forth motion occurs repeatedly until the set time has expired.INCLUDED: The Benchmark Rotating Mixer with Rotisseries includes: - Three Rotisserie Tube Holders (12 x 50ml, 20 x 15ml, and 48 x 1.5/2ml) - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty