Varian 660-IR FT-IR Spectrometer Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

PerkinElmer Spectrum One FT-IR Spectrometer Without a computer Without software Untested equipment

The Varian 640-IR is an affordable, high performance spectrometer designed to make FT-IR spectroscop (more)y easy. With a range of unique, easy to use hardware and software features, it allows even novice users to quickly become productive. It is available in mid-IR or near-IR configurations and is ideally suited to QA/QC applications and identification and verification analyses, and is a perfect educational tool. Spectral range: 7900 – 375 cm-1 Spectral resolution of at least: 0.25 cm-1 The limits of the permissible absolute error of the wave number scale: ± 0.25 cm-1 Signal-to-noise ratio (the number of scans is 100, with a standard configuration with a spectral resolution of 4 cm-1): at least 10000 cm-1 The level of pseudo-scattered light is not more than ± 0.1% Integration time: 5 s Monochromator: high-speed Cerny-Turner As-is No software No warranty

This Perkin Elmer AutoIMAGE FT-IR Microscope was removed from a university lab where it was surplus  (more)to requirements. The item powers on and is in a reasonable used cosmetic condition. Included with it is a Perkin Elmer LC Separation Notes Version 1.0 Disc

Varian 660-IR FT-IR Spectrometer This item was removed from a university where it was surplus to req (more)uirement. It is in good cosmetic condition and powers on, it has been seen by an engineer with a summary of the report stated below. The beam splitters showing signs of moisture damage, and the unit has software recognition issues.As a result, it is listed as Spares/Repair.

Varian 7000 FT-IR Spectrometer with FTS 6000 Power Supply This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up but we were unable to test it further without the software. It is in good cosmetic condition with marks from use. Included are; Varian SpectrometerModel - 7000 FT-IRSN - 46040-409 Varian Power SupplyModel - FTS 6000SN - PS-0391-0806

This Gasmet FT-IR Gas Analyser Spectrometer Model - DX4030 was removed from a university lab wh (more)ere it was surplus to requirement. The unit powers up and we have run a hardware check. Acceptable values for hardware parameters: Cell temp: close to ambient tempCell pressure: close to ambient pressureSource intensity: >50% (original =100%) - Unit showed 89%Interf height: >3V when cell is filled with zero gas (original approx 5.5V - Unit showed 3.57VInterf center: 2000...3000 point - unit showed 2483 pointsElectronic temp: 0...50ºC - unit showed 21.43Detector temp: -37ºC - Unit showed -37.08ºCExt detector temp: +25ºC - Unit showed 19.82ºC Nothing seems out on the acceptable values for the hardware parameters. We then ran the Zero Calibration check after flushing the air for 3 minutes.The unit showed - Min: 115.0000 Max: 58825.0000Acceptable values for Maximum background spectrum are >40 000 or >70% of original. The system is in good cosmetic condition but has some minor marks from use. It comes in Hardigg Storm Case with:-2 x Gasmet Battery UnitsGasmet Software CDQuantitech DongleGasmet DongleGasmet DX4030 Quick Reference Cards2 x Black carry cases

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-21726 NTC auto Cylinder change over unit ITEM-21717 Hi Lo 300 bar InletITEM-21719 Freshford 300 bar Inet ITEM-21730 ALA Scientific Valve Commander ITEM-28014 Chemical Spill Kit ITEM-28015 Chemical Spill kit ITEM-28013 Box of Polythene heavy duty bags 150 x 200mmITEM-30114 1,000 ml volumetric flasks ITEM-30115 1,000 ml volumetric flasks ITEM-30112 Box of miScript miRNA PCR arrays ITEM-25739 Imperial Saucepan ITEM-25696 2x Ribbon Cables (parcel) ITEM-25692 Huntingdon Animal Blood Pressure Monitor ITEM-25700 2x Denley Aluminium vial stands ITEM-28026 Jencons Heated Stirrer ITEM-25695 Mini Centrifuge Rotor Lid ITEM-28007 Adjustable microscope stage centre ITEM-25743 CamLab UV Lamp CAMAGITEM-25712 Olympus Highlight 3100ITEM-27671 Carl Zeiss Mixed Parts ITEM-28025 Greiner Bio one box 9pks of 10. 384 well microplates small VolITEM-25701 HPLC Blockheater w/ manual ITEM-25690 Watson A.C. Volt Gauge ITEM-25747 Box of 3 prong retort clampsITEM-25706 Waste containerITEM-27660 Laboratory StandITEM-28021 Spillage Absorption kitITEM-28020 Spillage Absorption kit ITEM-28019 Spillage absorption kit ITEM-28018 Spillage absorption granulesITEM-28022 STEM Corp Block HeaterITEM-28024 Jencons Light boxITEM-27666 Heat Resistant Stove Glass & accessories ITEM-25717 Olympus Light sourceITEM-25713 Olympus Highlight 3100 ITEM-27662 Mixed Glass & accessories ITEM-25738 Helena Electrophoresis GEL Tank ITEM-27379 3 bits of GlasswareITEM-25697 Box of HPLC Misc bitsITEM-25709 Kinetrol 1/4 turn ActuatorITEM-25736 Red Desk LampITEM-25684 4x Beckman Coulter Centrifuge bucket lids ITEM-25704 5x Beckman Coulter plastic compartments ITEM-27673 Bio Rad Econo RecorderITEM-28027 Spill Kit ITEM-27380 Box of small glasswareITEM-30090 Image Transfer FoilingITEM-30104 Bosch Interferenz 5 ITEM-30106 T8 240V/20W UV blacklight ITEM-30096 Toshiba DVD player ITEM-30102 EMS Combination 850ITEM-30098 Bio Rad Variable Speed PumpITEM-30077 ScotLab Electrophoresis Power Supply SL-3656 ITEM-30101 Bio Rad Model 200/2.0 Power Supply ITEM-30093 EMS Suction Unit ITEM-30085 Life Tech vertical electrophoresis apparatusITEM-30087 Charles Austen DA7C PumpITEM-30078 Koch-Light LTD electrophoresis tankITEM-30105 Samsung 32" monitor ITEM-30100 Huntleigh Flowtron Plus ITEM-30095 EMS HI-Q applicator & wires ITEM-30091 IKA MS2 Minishaker ITEM-30099 Bio Rad Variable Speed Pump ITEM-30103 MIE transducer controller ITEM-30097 Unknown metal components ITEM-30094 Biofeedback EMG100 ITEM-30086 Bio Rad Gel Dryer 583 ITEM-30092 Bowens mosaic limelite ITEM-30088 Edwards thermocouple 507 ITEM-27907 Vickers Instruments Microscope ITEM-27913 Vickers Instruments Microscope ITEM-27912 Vickers Instruments Microscope ITEM-27911 Vickers Instruments Microscope ITEM-27910 Vickers Instruments Microscope ITEM-27909 Vickers Instruments Microscope ITEM-27908 Vickers Instruments Microscope ITEM-30040 Unbranded Microscope ITEM-30144 Glass vials ITEM-30039 Leybold Didactic Microscope ITEM-30035 Leybold Didactic Microscope ITEM-30038 Leybold Didactic MicroscopeITEM-30037 Leybold Didactic Microscope ITEM-30042 Unbranded Microscope ITEM-26095 Techne MCS-104S ITEM-30081 Whatman thin layer chromatography plates

The Agilent 1100 G1313A Autosampler is designed for the pharmaceutical routine tasks and quality con (more)trol, as well as for environmental and food analyses. The G1313A features reliable injections from 0.1 µL to 100 µL with easy adaption for injection volumes up to 1500 µL for applications ranging from microbore to semipreparative chromatography. The HP Agilent 1100 G1313A's low internal volume of 300 µL allows minimum contribution to a system's total internal volume. The system uses overlapped injections for increased productivity with sample capacities of 100 × 2-mL vials in a standard tray, 40 × 2-mL vials in a standard tray, or 15 × 6-mL vials in a half tray. Firmware A.07.02. Maintenance and current/recent verification, carried out by the Official Technical Service.

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

With use of IM01.EX communication module it is possible to expand communication interfaces range of  (more)the HX5.EX indicator. The module is installed outside the hazardous area, and connected to the indicator using intrinsically safe interface. IM01.EX allows to establish communication between the scale and various accessories, e.g. barcode scanners, printers, displays, control buttons, light signalling towers, buzzers and other controlling/signalling devices. It also enables connection with systems of automatic adjustment and control of industrial processes, and with superior IT systems. IM01.EX-9 interfaces: 2 x RS232, USB, 4 IN, 4 OUT (digital), ETHERNET IP. It is possible to configure module interface quantity following the Interface Configuration Table that is to be found in product data sheet.