Ebro EBI 25 Funk-Temperaturdatenlogger Temperature Logger + Probe Fühler + Radio

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

JEOL JEM-100CX II Electron Microscope Vacuum Pump This was removed from a university lab where it w (more)as surplus to requirements. The unit is untested but in reasonable cosmetic condition. It requires a connection to the main system, which we do not have.

Carbolite Furnace Oven ELF 11/14 1100˚C Temp 3Kw Lab This item was removed from a university where i (more)t was surplus to requirement. The unit powers up and is in good working order. It is in good cosmetic condition internally and externally.

Sanyo MDF-U74V Ultra Low Temperature Freezer This was removed from a university lab where it was sur (more)plus to requirements. It is in good working condition and has been tested with a digital thermometer (not included) to -86˚C. It is in good cosmetic condition with minor marks from use.

Yamato AW-47-115V Semi-Automatic Benchtop Laboratory Glassware Washer, 115V Internal Capacity 300L T (more)emperature Range Ambient +10-210°C Temperature Accuracy ±1°C (at 210°C) Features - Programmable - High precision controller with improved display visibility and operability - Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information - Maximum 99 steps, 99 patterns, repeat operation - Easy sample data collection with cable port - Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker Semi automatic benchtop glassware washer with upward and downward two-way pressurized water with rotating jet nozzles bringing high level cleaning. Easy to to operate by simply setting time then start. With built-in water heater, no boiler piping and water heating system are required. Optional jet rack is available for hard to clean targets, such as glassware with narrow neck or body. Washing water temp. range: ambient ~60°C.INCLUDED: The Yamato AW-47-115V Semi-Automatic Benchtop Laboratory Glassware Washer, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This listing is for a Diagenode Mini-Chiller Water Cooler .The unit is in full working condition and (more) is ready for immediate release.The Diagenode Mini-Chiller is a compact and versatile cooling unit tailored for laboratory settings, particularly designed to enhance the performance of the Bioruptor® Pico sonication system. Here’s a closer look at its features and benefits:Key Features:Compatibility with Bioruptor® Pico: The Mini-Chiller is specifically designed to work seamlessly with the Bioruptor® Pico, which employs gentle sonication techniques. This compatibility helps preserve the integrity of delicate biological samples such as DNA and RNA during processing.Stable Operating Conditions: By maintaining constant temperature, pressure, and throughflow quantities, the Mini-Chiller ensures optimal conditions for sonication and other laboratory processes, reducing the risk of sample degradation.Cooling Options: Available in both air-cooled and water-cooled versions, the Mini-Chiller offers flexibility based on laboratory needs. The water-cooled version utilizes natural refrigerants, making it an eco-friendly choice.Wide Temperature Range: The Mini-Chiller supports a broad temperature range, extendable up to +100°C when equipped with an optional heater. This feature allows for versatility in various experimental protocols that may require heating in addition to cooling.Compact Design: With dimensions of 225 x 360 mm, the Mini-Chiller is designed to fit easily on laboratory benches, making it an ideal choice for space-constrained environments without sacrificing performance.User-Friendly Indicators: The unit includes a large temperature indicator, a fill level indicator, and status LEDs for pump, cooling, and heating functions. These features enhance usability, allowing researchers to monitor conditions and ensure proper operation at a glance.

Portable suction system, vacuum pump ROCKER BIOVAC 240 New equipment (never used) Max. vacuum : 720  (more)mmHg Max. flow rate : 38 l//min Hose barb : 3/16 inch Pump type: Piston Dimension (LxWxH) : 53x24x35cm Suction bottle：PC (3000ml)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

AREC 10 Digital was designed for laboratory applications where a comfortable and large work surface  (more)is required, which here reaches 26x26 cm in size, the largest among the Velp series. The plate offers high resistance to acids, bases and solvents, while the technopolymer structure of the stirrer is designed to prevent accidental spills of liquids from reaching the electronic components, ensuring easy and quick cleaning. This translates into product safety and durability even in the most demanding laboratories; further protected by a 3-year warranty (subject to online registration). The heating uses the latest technologies available and ensures a uniform temperature across the entire plate and exceptional transfer efficiency. Same quality for agitation: SpeedServo™ technology and brushless motor offer precise and powerful agitation even when viscosity varies. In short, why we offer you AREC 10 Digital: - Easy to use and highly resistant to chemicals - Precise setting of temperature and agitation - Accepts volumes up to 25 liters / 30 kg - Possibility of precise thermoregulation of the fluid with Pt100/Pt1000 and VTF probes - Designed for durability and guaranteed for 3 years The powerful brushless motor of the AREC 10 Digital ensures stable and reliable stirring. The patented SpeedServo™ technology ensures constant speed even with variations in fluid viscosity. The always precise stirring speed, from chemical reactions to sample preparation, adjustable from 100 to 1500 rpm, it is ideal for any laboratory need. With a stirring capacity of up to 25 liters (H2O) (or 30 kg of liquid), the AREC 10 Digital stands out for its robustness and superior performance. Arec 10 reaches the remarkable temperature of +550°C in complete safety and control. Extremely precise, you can increase the temperature by +1.0°C. By connecting the external PT100 or PT1000 sensors you can directly thermoregulate the sample up to 350°C with an accuracy of ±1.0°C. Using VTF Digital instead you can control the temperature with a precision of ±0.5°C (up to a maximum of 300°C). In this regard, Arec 10 is available with different accessory packages. You will find all the combinations at the bottom. Safety during rescaling: - 'Hot surface' alarm when temperature exceeds 50°C, even when inactive. - Overtemperature alarm above 570°C 1 - Aluminum heating plate with ceramic coating 2 - Main switch 3 - Knob for stirring setting 4 - Knob for temperature setting 5 - Display

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.