Nikon Japan Plan UW 2X/0.6 Objective Lab

one CLASSIC Vintage MicroscopeManuf: RHEIN - OPTIK ; Berlin / Leitz Wetzlar / GERMANYdescription:6 e (more)yepieces...............5X......10X.......10X.....15X....15X periscopic......20X periscopic turret with 3 objectives 10 : 1 N.A. 0.30........45 : 1 N.A.  0.30.......100 : 1 Oil Immersion mechanical stage with X-Y precision drives condensor with diaphragm adjustable mirror double sided ( hollow and plane ) with wooden caseinstrument is in used condition with traces of use and 100 % functional a VERY RARE to find VINTAGE Microscope from RHEIN-OPTIK / GERMANY

This Leitz Laborlux K Binocular Microscope was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition but has some marks and scratches from where stickers had been removed. The Condenser rack and pinion is damaged with teeth missing, if it's turned up too high the knob will get stuck. Head - 512 661 2 x Eye Pieces -Periplan 10 x / 18 (519 748) 4 x Objectives:-160/- EF 10/0.25 (519760)160/0.17 EF 40/0.65 (519762)160/0.17 EF 100/1.25 OEL (519804)160/- EF 4/0.12 (519759) Condenser Head - 0.90ASS1.1 (513548)Condenser Swing top (513547)

Optika B-353PH Compound Microscope w/ 4 x Objectives This was removed from a university lab where i (more)t was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Item includes the following: WF10x/20 Eyepiece x 2Both in good cosmetic condition with clear visibility. Plan 40Ph/ 0.65 160/0.17 Plan10Ph/0.25 160/0.17 Plan 4/0.1 160/0.17 Plan 100Ph/ 1.25 OIL 160/0.17 All objectives are in good cosmetic condition with clear visibility.

This Nikon Microphot-FXA Fluorescence Microscope was removed from a university lab where it was surp (more)lus to requirements. The PSU is missing so we were unable to power up the Microscope. It requires a Nikon PSM-4A. The power supply unit for the mercury lamp is present. The PSU is working but the bulb needs to be replaced. The system is in reasonably good cosmetic condition with marks from use. It has; 2x Nikon FX-350X 35mm film cameras attached via Nikon mounts.1 x SOFT RTS 25.4 2mp slider with data lead. 1 x NIKON 4/0.101 x NIKON FLUOR 20 0.75 160/0.171 x NIKON FLUOR 40 0.85 160/0.11-0.231 x NIKON FLUOR 100 / 1.30 OIL 160/0.172 x CFWN D10 X/20 There is a PC with ISMOL Software & relevant PCI cards for connecting everything.

Zeiss Axioplan 2 Fluorescence Microscope w/ 4 Objectives Lab This item was removed from a university (more) where it was surplus to requirement. The unit appears to be functioning well and can also be controlled via the free MicroManager software. It is in good cosmetic condition. It does feature the following: 2x Eyepieces PL 10 x 25P/N: 44 40 34 2x Zeiss Plan-NEOFLUAR 40x/0.75 ∞/0.17P/N: 44 03 51P/N 44 03 50 1x Zeiss FLUAR 100x/1.30 oil ∞/0.17P/N: 44 02 85 1x Zeiss Plan-NEOFLUAR 63x/1.25 oil ∞/0.17P/N: 44 04 60 1x Carl Zeiss HAL 100 12v 100w lamp houseP/N: 1039-685 1x Zeiss Reflector Turret with 6 filters1x FITC 1x TRITC1x YFP1x CFP1x Cy51x DAPI

Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (2x, 10x, 20x) PA Objectiv (more)es APO 2X, 10X, 20X Parfocality Adjustable Optical System Specialized Lenses Design For NUV to Visible NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Ergonomic Design: The design of the PSM-1000 encourages the optimal amount of usability without sacrificing comfort. - Laser Work: The PSM-1000 is standard equipped for laser work covering the spectrums ranging from 355nm [UV] to 532nm [Green] to 1064nm [IR]. - Focusing Block: Rated for load weights up to 45lbs., image focal planes can be adjusted at 1μm resolutions within the total 50mm stroke. - Adjustable Nosepiece: Forward facing and equipped for four M26 x 1/36" (0.706) type objectives, the PSM-1000's nosepiece is dovetail mounted for molding to different types of research and usage. The PSM1000 is an OEM-ready instrument for the best images of flat, reflective specimens. Samples from metallurgy and the semiconductor field are treated by ELWD Plan Apochromatic objectives with a stupendous resolution power. The large FOV24 with an erect, true sided image allows fast orientation and manipulation work. INCLUDED: The Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (2x, 10x, 20x) PA includes: - APO 2X, 10X, 20X Parfocality Adjustable Objectives - Adjustable Nosepiece - Widefield WF10X/24mm Eyepiece - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Sony Solid-State Memory Camcorder Model-PMW-200 This item was removed from a university where it was (more) surplus to requirement. It is in reasonably good cosmetic condition, powers on, and has been tested with an in-house charger. Please note that it does not include a battery or charger. It will require the following to be operational: Sony BC-U1 or BC-U2 Charger/PSU.And a BP-U30/U60/90 battery pack.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Scilogex OS40-Pro Overhead LCD Digital StirrerThe Scilogex OS40-Pro Overhead LCD Digital Stirrer fea (more)tures a maximum capacity of 40L, accurate microprocessor stirring speed control guarantees speed precision, anti-spill microprocessor control slow start up prevents sample spills, a through-shaft design allows for easy adjustment of the impeller position, LCD display and control, set value and actual value can be displayed for real-time monitoring of torque and speed. INCLUDED: The Scilogex OS40-Pro Overhead LCD Digital Stirrer includes: - Key of Drill Chuck - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty