Motic PSM-1000 Trinocular Upright Industrial Microscope w/ APO Objectives (5x, 10x, 20x) PA

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Leica Microscope Micromanipulator was removed from a university lab where it was surplus to req (more)uirements.Serial#: 0502166 The unit is in good mechanical working order and good cosmetic condition, we are unable to test it further at our facility.

This Leica TCS SP 2 Confocal Microscope System was removed from a university lab due to a fault. The (more) university reported "Apparently it was a computer issue, in that the computer failed and would no longer talk to the confocal and nothing could be done to remedy the issue since Leica wont support it, I’m told the actual microscope and lasers are fine (if old!)" From our assessment, the microscope appears to be fully working and it could be split from the main system and used on its own. The controllers etc for the automated stage also appeared to work fine. It is just the AOBS head and control system that doesn't want to communicate with the PC. The system has been fully connected up at our facility. We have replaced the PCi card but that did not generate any success either. When starting the Leica PC program it shows the following message: "AOBS Crystal Ctrl (2)" reports 0 unlocked PLL channel(s)! Please lock channel(s) or reset controller. The AOBS is the scanner head which is attached to the main control desk. We have also tried the system with another identical head that we have in stock. That gave us exactly the same result. It is sold for spares/repairs. Please note that the marble table in the photos was retained by the lab.

Motic GM-171 Trinocular Gemology Stereo Microscope Magnification Range 7.5X to 50X Observation Tube  (more)Trinocular Head Optical System Greenough Features - Trinocular head with 45° inclination and fixed 50:50 light split - Adjustable interpupillary distance (52-75mm) for comfortable viewing - Diopter adjustment on both eyepieces (+/- 5 diopter) for personalized focus - Widefield WF10X/23mm eyepieces providing a large field of view - Adjustable iris diaphragm with an aperture range of Ø41mm to Ø2mm - Coarse focusing system with tension adjustment and a 125mm focusing stroke - Includes specialized gemology tilting base for precise sample positioning The Motic GM-171 Trinocular Stereo Microscope is expertly designed for gemological and precious mineral work, providing a magnification range of 7.5X to 50X. Utilizing a Greenough optical system, it offers superior clarity and depth, making it ideal for detailed analysis. The trinocular head is inclined at 45° for ergonomic viewing, and the fixed 50:50 light split allows for precise imaging. Its adjustable interpupillary distance (52-75mm) and diopter adjustment (+/- 5 diopter) on both eyepieces ensure a comfortable and customizable viewing experience. The widefield WF10X/23mm eyepieces also deliver a broad field of view for a comprehensive look at samples. This microscope features a 6.7:1 zoom system with objectives ranging from 0.75X to 5X and a working distance of 110mm, offering flexibility in handling samples. The 360° rotatable base and tiltable stand allow for easy adjustments to viewing angles, while the adjustable iris diaphragm (Ø41mm - Ø2mm) offers precise control over illumination. Incident illumination is provided by a 7W fluorescent light with a gooseneck for adjustability, while transmitted illumination comes from a 6V/30W Quartz Halogen lamp with intensity control and a darkfield illuminator. Complete with a dust cover, stainless steel wire stone holder, and an aluminum carrying case, the Motic GM-171 is a comprehensive tool for professionals in gemology. INCLUDED: The Motic GM-171 Trinocular Gemology Stereo Microscope includes: - 45° Trinocular Stereomicroscope Head - 45 Degree Binocular Stereomicroscope Head - Gemology Tilting Base - Wire Gem Holder - Aluminum Carrying Case - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic BA310E LED Binocular Compound Microscope Based upon the successful BA310 microscope, the Motic (more) BA310 Elite was designed for use in universities, clinics and laboratories. With many improvements over its predecessor, the BA310 Elite was created to offer versatility and ease of use, all in a cost effective and durable package. The BA310E features a fully interchangeable illumination system, enabling multiple styles with the same microscope. While maintaining the full Koehler illumination feature, users can easily switch from a 6v/30w Halogen lamp, to a 3w LED. Furthermore, Motic offers LED lamps with two different color temperatures – 4500K and 6000K. The BA310E also includes Motic’s new EC Plan Achromat objectives. The EC series feature increased working distances, greatly reducing sample contamination when switching from oil to dry lenses. And with significantly improved field flatness and resolution, these provide a fully corrected intermediate image without colored fringes. This microscope can also be easily upgraded for additional modes of operation. Motic offers optional hardware and optics for polarization, phase contrast as well as darkfield. Please see the tab labeled “Accessories” for a full selection of objectives, sliders, and much more. Click Here to View Product Video INCLUDED: The Motic BA310E LED Binocular Compound Microscope includes: - EC Plan Achromat objectives 4x, 10x, 40x S, 100x S-oil - Observation tube - Eyepiece - Nosepiece - Objectives - Rackless stage - Condenser - Illumination - 5 Year Manufacturer's Warranty

Thermolyne 17600 Dri-Bath Barnstead With a 12 position block Power: 75W

Hamilton Microlab Starlet Interface Box

Optics: Green fluorescence; brightfield Objective Compatibilities: RMS-threaded, infinity corrected, (more) 45 mm parfocal distance Fluorescence Filters: Green: Ex 457-493, Em 508-552 nm Camera: High Sensitivity Monochrome CMOS Sensor; C-mount Image Formats: JPG, BMP, TIF, or PNG Image Size: 100×100 to 1700×1700 pixels Field of View: Up to 0.78 x 0.78 mm at 20x Video Rates: Up to 10 fps; with reduced frame size, up to 30 fps Dimensions (WxDxH): 240 x 140 x 165 mm Weight: 3.25 kg

MVE CryoShipper 8.5 ltr with ShipsLog 3 Temperature data logger Lab This item was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Neck Opening in (mm): 8.50 (216.0)Overall Height in (mm): 21.5 (546)Outside Diameter in (mm): 14.50 (369) Also includes the following: ShipsLog 3 Temperature data logger.

HX7 scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68)  (more)mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.