MOTIC AE31 Series Inverted Microscope with 4 x Objectives Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Prior PX042 Compound Microscope With 4 x Objectives Lab This item was removed from a university wher (more)e it was surplus to requirement. It is in good cosmetic condition and in full working order. This microscope features: Four-position turret with the following objectives: E Plan 4 x / 0.10 -0.17E Plan 10 x Ph / 0.25 -0.17E Plan 40 x Ph / 0.65 -0.17E Plan 100 x Ph / 1.25 oil -0.17 Eyepieces: 2 x WF 10x/22

ISI ABT Scanning Electron Microscope (SEM) ABT-55 This was removed from a university lab where it wa (more)s surplus to requirements. We are told it was in working order prior to being put into storage some time ago Included are; ISA ABT 55 Main Control UnitWith 25cm CRT monitorControl desk with all control switches and buttons Microscope ABT 55 UnitSerial No. K244149Year 1989Controls for vacuum system, not included ETP Sempra Robison Detector Head and Control ModuleModel PSM-11-4Serial No. 524 The main units were not powered up due to no plug on the main power supply unit, it was previously hard wired. The Robinson Detector unit powered on and displayed readiness lights. Accessories:5 x used spare copper columns4 x small aluminium fitting platesOperators Manual4 x 15 amp fusesFilament cartridge

Leica CTR 6000 TCS SP5 Laser Scanning Confocal Microscope This system was removed from a laboratory  (more)where it was surplus to requirements. The system powers on, with all units functional, including the stage and light sources. According to the previous owner, the system features a Leica SP5 confocal with 3 PMT and 2 hybrid detectors, along with an FCCS system that includes 2 SPAD detectors. The filters for the detectors are beginning to delaminate and will need replacing. The SP5 computer is relatively new and has been updated to Windows 10. A full environmental chamber for temperature and CO2 control is also included. The system consists of: - TCS SP5 Control Desk, Microscope, and Scan Unit (Serial No. 510000038, Year: 2007) - Leica CTR 6000 Controller (Serial No. 280210) - Leica CMS Detection Unit (Part No. BS054407) - Leica APD Detection (Serial No. 65031) - Leica Scan Head/Trigger Box (Serial No. 0051) - Leica Switch Console V3 (Serial No. 0028960) - Leica Cooling Fan and Flexible Duct (Part No. 1531229001) - Leica Mercury Lamp Box (Type 11307072071/BZ) - LEJ Mercury Bulb Controller (Type ebq 100mc-L, Serial No. 06 2380802161, 217 hours bulb run time) - Leica Stage Controller (Part No. 11505180) - The Box polycarbonate microscope enclosure - The Cube CB02A Enclosure Heater with probe (Serial No. 10585) - The Brick Air Humidity and CO2 Regulator (Serial No. 10654) - Gecomp PC running Windows XP Pro (Serial No. 071362) - HP Z4 PC running Windows 10 (Serial No. CZC026C55L, Product No. 1JP11AV) - 2 x NEC 1990SXi Monitors (Serial Nos. 6Z009731YB, 6Y008209YB) - Cherry Keyboard (Model MY 3000 USB, Serial No. G0006934) - HP KB-1469 Keyboard (Serial No. 803180-L31) - 2 x HP Mice (Part Nos. 672651-001, 458407-002) The microscope is fitted with five objectives: - Leica 784 HCX PL APO 100x/1.4-0.7 oil cs - Leica 510 HCX PL APO 63x/1.4-0.6 oil cs - Leica 214 HCX PL APO 20x/0.70 1MM corr bl - Leica 506251 HCX PL APO 40x/1.25-0.75 oil - Leica 506279 HCX PL APO 63x/1.2 W corr cs Additional components: - Twin binocular eyepieces HC PLAN s 10x/125 M - 7 x colour filter and mirror blocks, 2 x filter block covers - 12 x stage parts - 1 x humidity water cylinder for The Brick Included Software & Manuals: - Leica Software Discs: Confocal Software v. 2.585 (2x), LAS AF v. 2.73-9723, SP5 WS Premium Recovery, SP5 SP8 Standard G4 Recovery W10, SP5 Workstation Recovery - 2 x copies of Windows XP Professional OS - Manuals: Newport PR 50 compact high-speed rotation stage, Coherent Sapphire 488-20 & 410-10 OEM Laser, The Brick operating manual, The Cube 2 temperature controller manual

Leica DMIL Phase Contrast Inverted Microscope. Binocular head Leitz 10x/18 eyepieces. Leica objectiv (more)es. 4x- 10x Ph1a- 20x Ph1a. Leica compact inverted microscope. Leitz for phase contrast at /10x and 20x. Leica DMIL Phase Contrast Inverted Microscope. Leitz 10x/18 binocular head Leica 4x objectives- 10ph1a-20xph1a Leica/Leitz compact inverted microscope for phase contrast at 10x and 20x.

Motic SMZ-160-BLED Stereo Zoom Microscope with LED Illumination Max Magnification 45x Warranty 5 Yea (more)rs Illumination LED Variable Light Control Features - ESD and non ESD version - New lead-free optical design - Greenough optic system - Compact and rugged - Light weight - Anti fungual treatment on the base - Interlock eyepieces tube - LED stand - 3W LED Transmitted Illumination - 3W LED Incident Illumination - Switching power supply for use worldwide (100-240V) - No bulb change, lamp life up to 25,000 hrs. - Outstanding price-performance ratio INCLUDED: The Motic SMZ-160-BLED Stereo Zoom Microscope with LED Illumination includes: - Widefield Eyepieces 10X / F.N. 20 - R2LED: Compact Incident/Transmitted Illumination Stand - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Thermo Shandon Cytospin 4 Cytocentrifuge was removed from a university lab where it was surplus (more) to requirements. The unit has been inspected by a service engineer who fitted new plastic hinges fitted. The repair isn't perfect, but it's functional It also appears to have a battery error. There is a battery soldered to the main board, it probably needs replacing. The unit shows an error 4 code when first switched on but if you press stop the code goes away, and the unit starts up normally. The error relates to a discharged battery. The unit is in otherwise full working condition and is in good cosmetic condition with just the marks from the repairs.

OMNITIP™ Starter ST 1000 µl tips are high quality laboratory accessories designed for pr (more)ecision pipetting. Designed with efficiency and convenience in mind, they are an indispensable tool for everyday laboratory work. Capacity: 1000 µl Colour: blue Set contains: box, 3 racks and 288 tips Application: - precise dispensing of biological samples, - accurate pipetting of medicines and medical solutions, - preparing and transferring chemical solutions, - an indispensable tool in experiments requiring precise dosing.

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.