Motic AE21 Series Inverted Trinocular Microscope with 3x Objectives Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Ceti Versus 3400.0000 Inverted Microscope This was removed from a university lab where it was surplu (more)s to requirements. The unit powers up and is in good working order. 2 x Eyepieces - WF10x/20 2 x objective lenses: - 1x CETI PL L 25x/0.4 160/1.2 1x CETI Ph+25x/0.40 160/1.5

Zeiss Axioskop FS Fluorescence Microscope w/ 5 x Objectives This was removed from a university lab  (more)where it was surplus to requirements. The product has not been tested due to the absence of its power supply, but it is in good condition with minimal signs of wear. Due to the power supply not being included, we are unable to test further. Includes the following untested objectives; Gallenkamp 160/0.17 100 1.25 oil Zeiss Achroplan 10x/0,25 ∞/- Zeiss Epiplan 50x/0,50 44 28 50 Zeiss LD Achroplan 32x/0,40 PH2 ∞/1,5 Zeiss Achrostigmat 5x/0,12 44 01 20

Leica DM2500 Confocal Microscope System w/ Application Suite X Software Lab This system was removed  (more)from a laboratory where it was surplus to requirements. The client has stated the following: "The systems are fully working and Leica still offer user support for the systems if the new owners so wish. "The system is in good cosmetic condition. All units power up and communicate through the included Leica Application Suite X software.However, there is no camera included, so microscope images cannot currently be viewed via the PC. The system consists of: - 1 x Leica DM2500 microscope - Fitted with: - 1 x Leica 1531144511 Stage - 1 x Leica 11504058 Lamp - 1 x Leica 15-6504-202 Light Supply - 1 x Leica 1531323 Mirror Junction Box - 2 x Leica 507802 HC PLAN 10x/20 Eyepieces - 1 x Leica 507902 ACS APO 10x/0.30 CS Objective - 1 x Leica 507900 ACS APO 63x/1.30 OIL CS Objective - 1 x Leica EL6000 BZ02 with Lightpipe (LCD screen may be faulty, lamp timer not functional) - 1 x Leica TCS SPE Laser Head with Leica Supply Unit RGBV - 1 x Life Imaging Services 'the box' environmental chamber (with 2 x hoses) - 1 x Speirs Robertson Isolation Plate (75cm x 90cm x 5.5cm) - 1 x HP Z420 PC with 2 x Monitors, Keyboard & Mouse (running Leica Application Suite X 3.1.2.16221) - Includes Leica TCS SPE to SPE II USB licence stick

Motic SMZ-171-TLED Stereo Trinocular Microscope with LED Illumination Magnifaction Range 7.5x - 50x (more) Standard Working Distance 110mm Optical System Greenough Features - Stereo microscope - Trinocular head - Greenough optical system - 7.5x - 50x standard magnification - 110mm standard working distance - Pole stand with large working area - Incident illumination - 3w LED - Transmitted illumination - 3w LED - Wide variety of options The Motic SMZ-171-TLED is a stereo microscope, featuring high quality Greenough optics. Designed for versatility, the SMZ-171-TLED can be used in a variety of fields, from medical applications to industrial quality control. This rugged microscope is built to provide clear and distortion free images through many years of daily use. In its standard configuration, the SMZ-171-TLED has a working distance of 110mm, providing ample room for dissection instruments and sample manipulation. Working distance refers to the amount of space between the unit’s base and the unit’s objective, and is an important feature of any stereo microscope – the larger this number, the more room users have to operate. Magnification is controlled by a zoom knob on the microscope’s side, enabling users to adjust between 7.5x and 50x in one continuous motion. The zoom knob also contains five indents, so that precise magnifications can be quickly and accurately repeated. This is especially important when taking measurements with micrometers, reticules, and processing software. Motic also offers a wide variety of optional objectives and eyepieces, greatly expanding the magnification range from 2.25x to 200x. The SMZ-171-TLED is presented in a modular format and can be easily modified by the user. A large number of optional illumination sources, stands and filters are available, enabling users to customize the scope to suit their specific application. It is also available in both binocular and trinocular formats. Digital documentation of your work is made simple with any of Motic’s digital microscopy cameras – the Moticam. With over 20 models to choose from, these range from standard resolution, to research grade instruments with integrated cooling devices.INCLUDED: The Motic SMZ-171-TLED Stereo Trinocular Microscope with LED Illumination includes: - 10x Eye Piece - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Template input incorrectly - Listed as Used and not S/R Varian Cary 500 Scan UV-VIS-NIR Spectrophoto (more)meter with PC and Monitor This system was removed from a university laboratory where it was surplus to requirements. The spectrophotometer powers on, communicates with the PC, and is in good condition with minimal wear. However, multiple error messages are displayed during operation. Therefore, it is listed as Spares/Repair. The previous client has also confirmed that the system was not operational when last used. Error Messages Displayed: - SEQFatal Chopper Failure – Reported during calibration - CCTVis Lamp Failure – Vis lamp has failed; restarting the unit did not resolve the issue, suggesting a replacement may be necessary - CHGVis Source Failure – Reported by the instrument software - NMPDatum Not Found – Re-powering suggested, though the issue persists Software Included (WinUV Folder): - Align - Cary Help - Scan - Simple Reads Additional Components: - Dan PC - Model: Dantum - Serial No.: 428199-1 - Condition: Powers on, good condition with some wear. - Monitor (Lenovo ThinkVision) - Serial No.: VN722039 - Condition: Powers on, great condition with no wear. Spectrophotometer Specifications:- Model: Cary 500 Scan - Serial No.: EL97123060

This was removed from a university lab where it was surplus to requirements. The unit has not been t (more)ested. It is in good cosmetic condition with marks from use. Part no. 5-2437-00

OMNITIP™ Starter ST 300 µl tips are high quality laboratory accessories designed for pre (more)cision pipetting. Designed with efficiency and convenience in mind, they are an indispensable tool for everyday laboratory work. Capacity: 300 µl Colour: transparent Set contains: box, 6 racks and 576 tips Application: - precise dispensing of biological samples, - accurate pipetting of medicines and medical solutions, - preparing and transferring chemical solutions, - an indispensable tool in experiments requiring precise dosing.

E1 class mass standards are characterized by the highest precision in terms of mass. The allowable d (more)eviation from the actual weight is minimal, making standards of this class ideal for applications where every milligram matters. Product Features: Varied Standards: The set consists of 12 wire standards and 9 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes a brush and tweezers, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant wooden box, ensuring their safe storage and transportation. *The mg unit mass standards are wires.

IKA R 1376 Paddle Stirrer Tangential flow, minimum turbulence, good heat exchange, gentle treatment (more) of product. Used at low to medium speeds.Stirrer Ø: 150 mmShaft Ø: 10 mmShaft length: 550 mm INCLUDED: The IKA R 1376 Paddle Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

Edwards T-Station 300 Dry Turbo Station ISO100 mXDS3s, 115V Ultimate Pressure 6.000 × 10⁻⁸ Pumping  (more)Speed for H2 280 ls-1 Inlet Connection DN 63 ISO-K Features - Compact, powerful and reliable performance… wherever you need it - NOW also with the latest mXDS3s scroll pumps providing the best efficiency and best performance of the turbomolecular pump. - Push button vacuum stations ready to go - Designed to be used straight from the box our T-Station's do not require systemisation or complex configuration. - User servicable - The nEXT85 and nEXT300 turbomolecular pumps, mXDS3 dry scroll pump, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Inlet flange options - Available with either an NW40, ISO63 or CF63 for T-Station 85 and ISO100 and CF100 for T-Station 300 inlet flange to suit your application The Edwards Turbomolecular Pumping Stations are meticulously designed to provide a comprehensive and user-friendly vacuum solution, incorporating the latest technological advances for seamless installation and operation. These pumping stations are versatile, catering to a wide range of applications. Choose from a range of turbomolecular pumping stations, including the entry-level T-Station 85 and the higher capacity T-Station 300.Experience top-tier vacuum solutions with High Vacuum Pump Systems. Edwards offers cutting-edge technology and versatility to enhance your operations. Upgrade your vacuum system today and enjoy seamless performance in a variety of applications.The T-Station 300 builds on the existing popular T-Station 85 platform, by replacing the nEXT85H with the nEXT300 turbomolecular pump providing a solution for customers and applications that require a higher pumping speed up to 300 ls-1. Click Here to View Product Video INCLUDED: The Edwards T-Station 300 Dry Turbo Station ISO100 mXDS3s, 115V includes: - T-Station Pumping Station Base - Edwards mXDS3s Dry Scroll Pump - nEXT300 Turbomolecular Pump with ISO100 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty