Leica DMIL Inverted Microscope w/ 4 x Objectives Phaco, 160/- Lab

This Nikon Eclipse TE200 Inverted Microscope was removed from a university lab where it was surplus  (more)to requirements. It is in good cosmetic condition and powers on. We tested the top-mounted lamp with an in-house PSU, which is in good working order. (PSU not included) The bottom-mounted lamp has not been tested. The filter section seems to be experiencing a problem at position 1. There is an obstruction affecting the image, and despite our examination, we were unable to identify the cause of the issue. Additionally, one of the coloured filters appears to be damaged, although it does not seem to impact the image quality. No further testing has been conducted, as it does not include objectives to do so. Includes the following; 2 x Nikon CFI 10x/22 Eyepiece It is sold for spares/repairs

Nikon Apophot Table Microscope with 4 x Objectives This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and the halogen bulb is working, but there appears to be no power going to the second lamp. Without the second lamp working we were unable to see a clear image during testing. We feel it may need a degree of refurbishment to get it working again so it is sold for spares or repairs. It is in good cosmetic condition but has marks from age and use. Item supplied with:1 x Nikon Apophot Microscope.1 x Nikon Transformer.1 x Nikon 78567 DLL 40 0.65 0.17 Objective.1 x Nikon 42502 10 Plan 0.25 Objective.1 x Nikon 70693 DLL 40 0.65 0.17 Objective.1 x Nikon 33525 DL 10 0.30 Objective.2 x Nikon control panel.2 x Nikon AFM.2 x Nikon Eyepiece HKW 10x.2 x Nikon Eyepiece HK 5x.2 x Microtec WF 10x.3 x Nikon M-35 S Camera. Item powered on:Nikon Transformer powered on.Halogen bulb working.

Euromex MicroBlue MB.1152 binocular microscope for education with achromatic 4/10/S40/S100x oil DIN  (more)35 mm objectives, mechanical stage and LED illumination. Designed with input from teachers and students with both intermediate and advanced science practice sessions in mind. Euromex MicroBlue MB.1052 binocular microscope for education with secured wide field eyepieces WF 10x/18 mm. Binocular 45° inclined tube, 360° rotation. Nosepiece for 4 objectives with achromatic 4x N.A. 0.10, 10x N.A. 0.25, S40x N.A. 0.65 and S100x oil N.A. 1.25 DIN 35 mm parfocal objectives. Square stage 115 x 100 mm with 55 x 22 mm X-Y translation stage. 1 W LED illumination with intensity control, rechargeable batteries with external power supply/charger. Paint with Antibacterial Protection Layer. Supplied with manual and dust cover in styrofoam case.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Motic Panthera TEC-BD/DF/RL/TL Trinocular Upright Industrial Microscope, 3x2 Stage Objectives 5X, 10 (more)X, 20X BD, 50X S-APO BD CCIS BD Plan Achromatic & S-Apo (Pb free) DIN (for Brightfield and Darkfield) Optical System Colour Corrected Infinity Optical System (CCIS) Illumination 3W LED Epi-Illumination Kohler Illumination 0.06W LED Features - Panthera TEC models include brilliant optics and smart functionality for extended ease of use. - Features Smart Darkfield with 5 Segment illumination mode. - New LD Plan Achromatic and S-Apochromatic BD objectives & 22mm FOV eyepieces. - Pure incident or incident/ transmitted microscope stands available. - 3W LED of selectable color temperature for incident illumination. - Motic LightTracer: Coded nosepiece & Digital light intensity knob. The Panthera TEC offers high value for the inspection of semiconductors and compound materials, especially in industrial quality control and technical education. Brightfield, Darkfield and Cross Polarization contrast are combined with a new, unique-to-Motic segmental illumination that all contribute to the versatility of this model. This concept allows an oblique incident illumination, perfect for the detection of scratches or other defects on flat and reflecting surfaces without a need to move the sample. BD models feature LD Plan BD objectives with a superb imaging performance, mounted on a 5-fold nosepiece. The light intensity for each objective position is automatically memorized and will be repeated once the objective is swung in again. The compact Epi illuminator carries a slot for polarizer and analyzer, ready for Polarization contrast and to reduce internal reflections. The illuminator also includes the controls for varying the incident light in terms of mode (BF or DF) and illumination angle.INCLUDED: The Motic Panthera TEC-BD/DF/RL/TL Trinocular Upright Industrial Microscope, 3x2 Stage includes: - 5X/0.13 (WD 17.3mm) - 10X/0.25 (WD 16.3mm) - 20X/0.40 (WD 7.3mm) - S-Apo 50X/0.80 (WD 1mm), - Dust Cover - Allen Key - Screws for Metal Extension Support - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Progressive scan type 2/3″ CCD, super-high-resolution with 1.4 million pixels (1280×1024) 5.1 cm pol (more)ysilicone TFT display for frame and focus adjustment in preview mode Camera control with handswitch, avoids vibrations of camera head and guarantees sharp images Photometric system with integral (30%) and spot (1%) metering possibility Automatic exposure adjustment with auto-exposure lock +/- 3 step compensation JPEG image format with three resolution modes 3.3 V SmartMedia (SSFDC) with 8 MB intermediate image storage without PC Direct printing to Olympus P-330E high resolution dye-sublimation printer (306 dpi) Camera control with personal computer via serial interface

Thermo Scientific Model E1-ClipTip laboratory pipette, 0.5 - 12.5µl - 8 channels Reference: 4672010  (more)Multi-channel (8 channels) Compatible with cliptip 384 12.5, 12.5 Ext Calibration range: 1.25-12.5µl Volume range: 0.5-12.5µl Inter-cone spacing (mm): 4.5 - 14.2

Thermo Multifuge X3 FR refrigerated centrifuge. Maximum speed for oscillating rotors 6000 rpm (7164  (more)xg) and for fixed angle rotors 15200 rpm (25,830 xg). Adjustable temperature from -10°C to +40°C (CFC-free). Timed from 1 to 99 h, 59 min or continuous operation. Programmable and 99 preset programs. (HxWxD) 840*546*670mm; 152.20 kg plus rotor. PDF User Manual. Includes TX-750 oscillating rotor (75003607) of 4 x 1000 ml and maximum speed of 4,700 rpm. (4.301 xg) Acceleration and braking time 65/50 s. - Precooling with direct button. - Maintenance-free induction motor. - Automatic rotor locking system with button. - Microprocessor control. - Internal memory that saves the most recent data. - RCF selection. - Temperature and pre-temperature control. - 9 acceleration curves and 10 braking curves. - Automatic rotor recognition - Recognition of electronic imbalance. - Auto-Lock® III rotor system allowing installation and exchange of rotors with the push of a button. - Automatic lid closure and locking. - Digital display. The Thermo Multifuge X3 FR refrigerated centrifuge is high-quality laboratory equipment that offers exceptional performance. Designed to meet the needs of scientists and research professionals, this centrifuge features a 4 x 1000 ml TX-750 (75003607) swing rotor, allowing large sample volumes to be processed efficiently. Thanks to its advanced cooling system, this centrifuge ensures a constant and precise temperature during the centrifugation process, which is especially important to preserve the integrity of heat-sensitive samples. Additionally, its ergonomic design and intuitive interface make it easy to use and allow for hassle-free operation. Thermo Multifuge X3 FR offers a wide range of functions and features, such as the ability to program different spin profiles, adjust spin speed and time, and select between different acceleration and deceleration modes. In addition, it has a high-resolution LCD screen that clearly displays centrifugation parameters and allows real-time monitoring. It has four with lockable wheels. With its ability to process up to 4 1000 mL tubes simultaneously, this centrifuge is ideal for high-demand applications such as separation of cellular components, protein purification, and sample preparation for molecular analysis. Its robust and durable construction ensures long life and reliable performance. 17 optional rotors In short, the Thermo Multifuge X3 FR refrigerated centrifuge is an indispensable tool in any laboratory that requires efficient and reliable centrifugation. With its high-capacity oscillating rotor and advanced cooling system, this centrifuge delivers exceptional performance and ensures the integrity of heat-sensitive samples. Its ergonomic design and intuitive interface make it easy to use, while its wide range of functions makes it a versatile choice for a variety of research applications.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.