Radwag HX7.4P2.6000.H1 Stainless Steel Multifunctional Beam Scale

Beam scales H315/4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the H315/4P2/H scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales H315/4P2/H series is manufactured in stainless steel version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 in stainless steel housing, featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

Pallet scales is stable and proved 4 load cell construction designed for weighing pallets. The load  (more)to be weighed can be placed on the platform by a standard fork-lift truck. Pallet scales H315/4P/H series is manufactured in stainless steel technology. The H315/4P/H series features wheels and handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 series featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

Pallet scales is stable and proved 4 load cell construction designed for weighing pallets. The load  (more)to be weighed can be placed on the platform by a standard fork-lift truck. The pallet scales C315.4P series is manufactured in mild steel powder coated version. The H315/4P series features wheels and handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE C315 series featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

HX7.4P2 H is a beam scale made of stainless steel. 4-load-cell, 2-component mechanical design stands (more) for high measurement accuracy. The weights may be loaded onto the pan using a forklift or a transporter crane, supplementary handles significantly facilitate the transport. The device has been fitted with a 7" colour display and a diode bar graph. Blinking green and red diodes show current load mass, the mass is presented in reference to the scale range or declared minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4P2 C is a powder coated beam scale equipped with the PUE HX7 indicator. This 4-load-cell me (more)chanical design can be used in a wider range of applications when compared to the standard pallet solutions. Beam spacing allows to place any loads onto the scale using either a forklift or a transporter crane. Transport-supporting handles facilitate transfer of the device to the place of use. The indicator has been outfitted with a colour 7" graphic display and a diode bar graph which via red and green lights presents the current load mass referred to the scale range or preset minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

This listing is for a LEC Medical ISU27C Freezer. The unit is in full working condition and is read (more)y for immidate realese. The LEC Medical ISU27C Freezer is a tabletop freezer designed for laboratory use, specifically for short-term sample storage. It has a capacity of 50 liters and operates within a temperature range of -18°C to -20°C. Key Features Spark-free: The freezer does not contain any electrical components, making it safe for storing reactive substances without the risk of explosion. External digital controller: Allows for temperature readings without having to open the door, preventing unnecessary temperature fluctuations. Manual defrost: Requires manual defrosting to maintain optimal performance. Interior Light (Medical): Does not have an interior light, as per medical regulations. Applications The LEC Medical ISU27C Freezer is suitable for storing vaccines, pharmaceuticals, and biological samples in laboratories, pharmacies, and hospital wards where space is limited. Additional Information The LEC Medical ISU27C Freezer is part of a range of purpose-built products designed for medical refrigeration, with a focus on providing secure and reliable refrigerated storage.

MSL Digital laboratory magnetic stirrer: for large volumes and low viscosity in the Life Science and (more) Pharmaceutical fields. - Preparations in buffer solution - Buffer preparation and WFI (Water for Injection) - Vaccine production - Cell cultures and tissue cultures Powerful and simple - The brushless motor guarantees continuous operations for high volumes - The LCD display allows you to set the speed precisely - Shakes volumes up to 8 liters (H2O) - Agitation speed from 40 to 1500 rpm - The lightweight design makes the MSL 8 Digital easy to move, saving valuable lab bench space - SpeedServoTM technology guarantees constant speed even when the viscosity changes - Equipped with timer to program your activities (1 to 99 min) In full safety - The control panel is splash protected for maximum durability - The stainless steel top guarantees unparalleled resistance - The lock function eliminates the risk of unwanted setting changes - Designed to last over time - Soft start to keep splashes to a minimum - Reverse timed rotation for effective mixing without increasing speed (5s to 99min55s) - MSL allows you to stop mixing for a certain period with the intermittent timer function. TECHNICAL FEATURES IN BRIEF Stirring system: Brushless motor. Structure: metal with epoxy paint; stainless steel top. Speed ​​range: 10rpm. Feedback: SpeedServo technology Reversal of stirring direction: Yes, from 5s to 99min55s. Continuous operations: Yes. Lock function: Yes. Intermittent mode: Yes. Display auto-off: Yes, after 10 sec.

The WLC.X7 series represents a new advanced level for precision balances. The X7 series balances fea (more)ture the latest generation capacitive display providing the maximum comfort of use, available right at your fingertips. Ease of operation, clear menu and practical arrangement of the display guarantee the best ergonomics for your everyday tasks. A wide array of available interfaces facilitate selection of the most optimal means for communication. Weighing Data Management The X7 series balances offer unlimited possibilities for cooperation with external devices, providing printing, copying, archiving and data transfer. Built-in IR sensors allow numerous operations (e.g. tarring, transmitting the result to a printer or selecting successive steps of a particular process, etc.) to be performed handsfree, by simply moving a hand across the sensor. The housing is made of plastic, and the pan is made of stainless steel. USB interface facilitates quick transfer and copying of any results of your work (measurements, reports, databases) to other balances. Network management of the weighing data increases effectivity, productivity and safety of the important data to the maximum. WLC.X7 scales are equipped with many communication interfaces: 2 x RS 232, USB type A, USB type B and Wireless Connection. Databases in X7 series balances In new WLC.X7 series balances the information system is based on 7 databases which allow several users to work with database storing several products. The registered weighing results can be subject to further analysis. The data is registered in 7 databases: Users (up to 100 users), Products (up to 5 000 products), Weighments (up to 50 000 weighments), Packaging (up to 100 packaging types), Formulas (up to 100 formulas), Clients (up to 1000 clients), ALIBI memory (up to 512 000 weighments). The X7 series features option of making reports on formulas (up to 500 reports). Personalization taken to the next level The X7 is the only balance available on the market that provides a user with the option to design display using wide selection of widgets. Customised display of X7 series offers direct access to the results of your work and other important information directly from the home screen. ALIBI Memory The X7 series balances feature ALIBI memory that is a warranty for safety and automatic recording of your measurements. Options such as data preview, copying and archiving are available to users as well. The ALIBI memory allows to record up to 500 000 weighment records. Under-Pan Weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Motic PA53MET-BD-T-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Sui (more)te Objectives S-APO BD 5x, 20X, 10X, 50X Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Achieve precise 3D measurements with advanced Z-axis profiling and Motic’s Analysis Software. - Enjoy crystal-clear images with advanced Semi-Apochromatic objectives. - Wide field of view with 25mm WF10X eyepieces, leading the industry standard. - Work with ease using a 20° inclined trinocular head. - Color Corrected Infinity Optical System (CCIS®) for superior clarity. - Versatile magnification options with 5X, 10X, 20X, and 50X objectives. The PA53MET BD-T-3D stands out for being an automated digital microscope for 3D image acquisition through a motorized Z-axis. Accurate 3D measurements of simple dimensions, deeps, and volumes are provided by capturing a stack of 2D images through the Z-axis profiler combined with Motic’s Analysis Software. The PA53 MET Series are superior solutions for industrial quality control and analysis of opaque materials. Crisp and clear images are guaranteed thanks to the newly designed Semi-Apochromatic Brightfield and Darkfield objectives. The eyepieces have a 25mm FOV, ahead of any standard. The incident illumination provides a variety of Contrast Methods: Brightfield and Darkfield are the standards, DIC is a powerful optional tool for the visualization of scratches or other tiny surface defects of opaque samples. INCLUDED: The Motic PA53MET-BD-T-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite includes: - S-APO BD Objectives: 5X, 10X, 20X, & 50X - 10x/25mm Widefield Eyepiece - Moticam S6 - 0.5X X C-Mount Adapter - Motic Analysis Professional Software - Integrated ND6, ND25, and LB filters - 4x4 in. Stage - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Eddy Jet 2 reduces costs per test, hands on time, and consumable use during counts while increasing  (more)microbiology lab’s productivity. This cutting-edge spiral plater automates, standardizes and streamlines plate inoculations with its patented cross-contamination-free technology. Microsyringes give the system unique, unmatched advantages that make it a bestseller. The user interface is very intuitive and there are no setup times. Although Eddy Jet 2 is mostly used by food, cosmetic and pharmaceutical labs, any microbiology lab can greatly benefit from its use. This instrument will generate a threefold dilution concentration gradient on a single plate, allowing labs to skip serial dilutions and most platings. Each sample is processed with a brand new sterile microsyringe, making sample handling a cross-contamination-free process. Other than bacterial counts, antimicrobial susceptibility testing (AST) and mutagenicity test applications are also available. Reproducibility: > 99% Time for a full cycle: 30 s (disposable syringes make disinfection unnecessary) Spreading modes stored: 25 spread modes (37 counting those for 150 mm Petri plates) Motion control: 3 Microcontroller-regulated stepper motors Petri plate diameters: 90 and 150 mm Minimum step volume: < 10 nl Maximum pipetted volume: 100 μl Syringe material: Polypropylene Plunger material: Polyethylene H.D. Auto checking: Programmed for 6 regions External balance connection: Serial RS232 DB9 Printer connection: Serial RS232 DB9 Barcode scanner connection: Specific connection for IUL barcode scanner Connection for updates: Ethernet/ USB pen drive Additional connections for peripherals: 2 x USB Host ports Dimensions (WxHxD): 515 x 420 x 500 mm Weight: 20 kg