Hund Wetzlar Wilovert Inverted Microscope w/ 1 x Objective 20/0.25 Ph-p Lab

Prior PL012 Binocular Microscope With 4 x Objectives This item was removed from a university lab whe (more)re it was surplus to requirements. It powers on and is in reasonably good cosmetic condition. The fine adjustment mechanism is struggling to catch slightly but remains functional. Includes 4 x objectives:- EA 100 Oil 1.25 160/0.17 - EA 4 0.10 160/- - EA 10 0.25 160/- - EA 40 0.65/0.17 Includes 2 x WF 10X/20 Eyepieces. Model: PL012S/N: 57418

Prior PX042 Compound Microscope With Four Objectives Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and in full working order. This microscope features: Four-position turret with the following objectives: E Plan 4 x / 0.10 -0.17E Plan 10 x Ph / 0.25 -0.17E Plan 40 x Ph / 0.65 -0.17E Plan 100 x Ph / 1.25 oil -0.17 Eyepieces: 2 x WF 10x/22

THis was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)none of the objectives are particularly clear, and two don't show an image at all (detailed below). The unit is quite stiff and awkward to use. For these reasons it is sold for spares/repairs. It is in reasonable good cosmetic condition with minor marks. 2x Carl Zeiss Kpl 8x Eyepieces 1x Leitz Wetzlar H 20x/0.40 ∞/1.80 Quarzgl. (no clear image) 1x Carl Zeiss 4494688 Ph2 40x/0.75 160/0.17 1x Carl Zeiss 4459404 Ph2 NEOFLAUR 25x/0.60 160/0.17 1x Carl Zeiss 4836489 Ph2 NEOFLAUR 16x/0.40 160/- 1x Carl Zeiss 4111437 Ph3 NEOFLAUR 100x/1.25 oil 160/- (no clear image). 1x Carl Zeiss Nose Piece III RS 46 62 49-9904 1x Carl Zeiss Stage 47 33 56-9901 1x Carl Zeiss Condenser 4680811 1x Carl Zeiss Microscope power supply 47 20 83 6 volt and 12 volt output. 1x Carl Zeiss Lamp power supply VHW 50f-2b 39 26 41 showing 365 hours and 55 minutes. 1x Carl Zeiss Lamp 12 volt 100 w 46 8019-9901 1x Carl Zeiss Lamp HBO 50 w 46 80 32-9902

Olympus Lext OLS3100 Confocal Microscope w/ MM6-ASPS Controller & OLS3000 PSU This was remo (more)ved from a university lab where it was surplus to requirements. All parts power on and appear to be in working condition. The control unit and emergency stop button are working correctly. The stage control appears to be working correctly with a smooth motor. Only the cables shown are included. The system is in good cosmetic condition, but the rubber foot ends are crumbling. There is no software included with the system. Items included:Main Units:Olympus Lext OLS3100Dimensions: 464(W)x559(D)x620(H)mmWeight: 56.5kg Olympus MM6-ASPS ControllerDimensions: 381(W)x304.8(D)254(H)mmWeight: 14.33kg Olympus OLS3000 Power SupplyDimensions: 355.6(W)x177.8(D)355.6(H)mmWeight: 9kg Accessories:Olympus U-DICROlympus U-P03Olympus U-AN360-3

Euromex iScope IS.1153-PLPHi phase contrast trinocular microscope. Eyepieces EWF10x/22 mm Objectives (more) corrected to infinity (IOS) DIN flat phase Plan PLPH10x/0.25, PLPH20x/0.40, PLPHS40x/0.65 and PLPHS100x/1.25 oil-immersion. Treatment mold. Capacitor-adjustable height, turret positions (bright-field, dark-field (up to 400x magnification), phase 10x/20x, phase 40x, phase 100x) with iris diaphragm. Lighting NeoLED 3W. Feeder internal 85V-240V. Auto power off Sensor iCare Supplied with a protective case, fuse replacement, special tools, small bottle of immersion oil 5ml, power cord, filter, white frosted, green filter, manual of instructions in Spanish. Certificate of origin the Netherlands

Motic BA410E Trinocular Sextuple Compound Microscope - Premium Phase Lab Package Magnification Range (more) 4x to 100x Optical System Colour Corrected Infinity (CCIS) Illumination 12V/50W Halogen or 12V/3W LED Features - Flagship model with highest level of optical performance - Phase equipment included allowing users to view samples using phase contrast - Maximum clarity in colour and resolution - Expanded resolution power for more detailed specimen evaluation - Light intensity adjustment with memory for each objective position - Rackless stage allows safe and fast throughput of slides - Coaxial coarse and fine focusing system with tension adjustment - Fine focus precision of 1 μm - Auto ON-OFF illumination function via built-in IR-sensor - Focusable and centerable swing-out Abbe condenser - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The BA410 Elite is Motic’s brand new approach for a professional research microscope with best image quality options. This version of the Motic BA410E is a trinocular sextuple microscope with a trinocular head, a CCIS Plan Achromat EC-H PL4X objective, and CCIS Plan Phase objectives EC-H Ph10X, EC-H Ph40X S, EC-H Ph100X S-oil objectives for professional research utilizing the phase contrast microscopy technique. Universities and laboratories with applications in hematology, cytology, and histology will benefit from this flexible microscope platform with a superb performance in optics and mechanics. Following Motic’s CCIS Infinity concept, the new Plan Apochromatic objectives may be chosen to get maximum image fidelity. Expanded resolution power in terms of numerical aperture and stunning color reproduction allows a reliable sample evaluation in all biomedical environments. The established EC-H Plan Achromatic bright field objectives are an integral part of the standard configurations, while Phase contrast is feasible with positive and negative Phase lenses included with this package.The BA410E stand carries an encoded 6-fold nosepiece that memorizes the light intensity setting for each objective position. This light memory function replicates the last setting once the respective objective position is swung in again. The rackless stage without a prominent gear rack allows a safe and fast throughput of slides. A ceramic stage insertion withstands abrasion for a long lifetime. INCLUDED: The Motic BA410E Trinocular Sextuple Compound Microscope - Premium Phase Lab Package includes: - Widefield High Eyepoint Eyepiece WFPL 10X / 22mm - Rubber Eyecup (Paired) - Reversed Sextuple Nosepiece - Phase Contrast 5 Position (BF, DF, PH1, PH2, PH3) Turret Condenser - Phase Centering Telescope - CCIS Plan Achromat Objective EC-H PL4X - CCIS Plan Phase Objectives EC-H PH10X, EC-H PH40X S, EC-H PH100X S-oil - Low Position Rackless Stage - Achromat Swing-Out Condenser N.A. 0.90 with Iris Diaphragm - Immersion Oil (5 ml), Allen Hexagonal Key, Vinyl Dust Cover, Blue Filter, Spare Fuse, and Arm Rest - Koehler Illumination Quartz 50W Halogen and 3W LED with External Lamp House and Intensity Control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Yamato CF-802A Cooling Water Circulator 16L, 115V Cooling Capacity 1320W at 10°C Operating Tempera (more)ture Range -20°C to 30°C Temperature Accuracy ±1.0°C Features - User-friendly controller: Controller with high visibility and improved operability. Possible to switch between measured temperature and set temperature. - Easy drainage of condensate water: A condensation drain port is designed near the connector on the upper rear of the unit - Easy to clean intake filter: Filter mounting plate located on the front of the unit can be easily removed when cleaning - Space-saving solvent recovery device stored in the main body as secondary trap: Used to recover solvent gases remaining in the concentration recovery process - Includes 1 Year Manufacturer's Warranty

MIL'S PS 12V vacuum pump. Single stage oil-free piston pump suitable for many types of applications  (more)in dry and wet environments. Compact design, with minimal maintenance and low acoustic level. Low energy consumption. They are recommended for applications where noise level is a priority. It has a pumping speed of 10 m3/hr and can reach a final vacuum of 80 mbar. The MIL'S PS 12V vacuum pump offers reliable and efficient performance for a variety of applications. With its compact and portable design, this pump is ideal for use in laboratories, refrigeration systems, and other environments where a precise and constant vacuum is required. With 12V power, this pump is easy to use and maintain, which makes it an excellent option for professionals.

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Benchmark Roto-Therm Plus Incubated Rotator Variable Speed w/ Tube Holders Benchmark’s new Roto-Ther (more)m series of incubated rotating mixers provide a wide range of mixing capabilities. Suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, histochemistry, hybridization etc, the mixers include interchangeable tube holders for accomomodating all common tube sizes from 0.5ml to 50ml. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing. For applications requiring temperature control, the Roto-Therm series can be digitally programmed to maintain chamber temperatures of ambient +5C to 60C and include an “in-lab” calibration function for ensuring accurate temperature control. The Roto-Therm is also available in a “Plus” configuration, providing the following additional features: Variable speed: 5 to 70rpm “Mix” function: Rotating in combination w/ oscillations (increased mixing) “Pause” function: Rotating with intermittent “stops” during rotation “Rock” function: Back and forth, gentle rocking motion (see-saw) Included tube holders hold capacities of 11 x 1.5/2ml, 5 x 5-7ml, 5 x 10/15ml, and 6 x 50ml with 24 x 0.5ml. The Plus model also offer an additional rocking platform (4.5 x 3 in.), as well as a 96 x 0.2ml tube/strip/plate holder for mixing PCR vessels in the “Mix” (oscillating) mode.Click Here to View Product Video INCLUDED: The Benchmark Roto-Therm Plus Incubated Rotator Variable Speed w/ Tube Holders includes: - Tube Holder, 11 x 1.5/2.0ml - Tube holder 5 x 5-7ml - Tube holder, 4 x 10-15ml - Tube holder, 6 x 50ml - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty