Mixed Job Lot of Laboratory Equipment - Leica, Bio-Rad, Brooks, Sorvall, Grant NOTE - THIS IS A SPARES/REPAIRS ITEM

Ohaus i-D33XW300C1X5 AM Defender 3000 Washdown Bench Scale, 600 lb., 0.1 lb. Maximum Capacity 600 lb (more). (300 kg) Readability 0.1 lb. (50 g) Platform Size 25.6 x 19.7 in. (650 x 500 mm) Features - Weighing, Checkweighing, Counting, Totalization - 7 Segment LCD with multicolor backlight - Internal power supply with power cord or rechargeable battery - Standard RS232 and optional USB device or ethernet - 304-grade stainless steel platform and frame, stainless steel IP66 indicator, IP67 load cell, non-slip adjustable rubber feet - 150% overload protection - 2 Year Manufacturer's Warranty

Labconco RapidVapVacuum EvaporationAdvanced vacuum function Microprocessor controls vacuum at pr (more)eset level; Automatic vacuum release if power fails LCD shows vacuum level from 0 to 999mbar Rear-mounted vacuum connections: vacuum port, tubing clamps, lid heater receptacle, 30 in.L (76cm) 0.5 in. I.D. tubing for connection to accessory vacuum pump Safety features Lexan™ shield on clear glass lid protects against glass implosion Dual lid clamps hold lid securely in place for vacuum-tight seal Phenol-free gasket provides complete sealing under vacuum PTFE-coated aluminum chamber Audible/visual alarm for end point detected by temperature sensors at heater and block Optional Lid Heater 40w heater plugs into electrical receptacle on rear Eliminates fogging, increases visibility when evaporating water or other high-boiling-point solvents Improved control panel Easy-to-read LCD display prompts operator to program desired parameters, and displays vortex speed by percentage, actual and set temperatures in C, and total time remaining in minutes. Enter up to nine different protocols into memory for easy repetition of exact test parameters Advanced heating system Contamination- and maintenance-free 1000-watt dry block heating system speeds evaporation rate by supplying a controlled amount of heat from ambient up to 100C Heater and sample block move in tandem for more efficient heat transfer Alarm signals completion of run, allowing samples to be left unattended while evaporating to desired endpoint Efficient operation Brushless DC motor ensures safe, maintenance-free operation and provides smooth, variable-speed power up to 1000rpm Produces no potentially dangerous sparks Increased durability Systems may be used with broad range of strong chemicals Powder-coated, aluminum cabinet base with smooth, solvent-resistant acrylic/PVC thermoplastic upper housing Aluminum chamber with PTFE coating conducts heat efficiently and resists corrosion All mechanical components are isolated from chemical fumes and vapors for longer life Chemical-resistant glass lid provides visibility of samples and detaches for cleaning Two clamps hold lid securely in place Phenol-free gasket provides sealing without potential for phenol contamination RapidVap models with optional RS-232 link allow all front panel functions to be performed and monitored from a personal computer (not included) INCLUDED: The Labconco 7900000 RapidVapVacuum Evaporation, 115V, 60Hz includes: - Vacuum Hose - Clamps x 2 - Heat Transfer Grease - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The FLoid Cell Imaging Station is an affordable, user-friendly imaging solution for the quick detect (more)ion and verification of fluorescently-labeled samples. The FLoid Cell Imaging Station captures transmitted light and three-color fluorescent images of your cells and samples right at your benchtop. You do not need to be specially trained or have dedicated staff to operate it. An uncomplicated user interface, streamlined image acquisition process, and real-time, multicolor display allow even imaging novices to produce high-quality images with a few mouse clicks. Cell Data: 3-Color Detection Color: Green, Red, Blue Data Outputs: JPG Files, PNG Files, BMP Files, TIFF Files Detection Method: Fluorescent Display: Adjustable tilt, 15-inch color Emission Wavelength: 446/33 (Blue), 532/59 (Green), 646/68 (Red) Excitation Wavelength: 390/40 (Blue), 482/18 (Green), 586/15 (Red) Filter Type: FITC, Texas Red, DAPI For Use With: All fluorophores compatible with excitation and emission filters Format: Slide(s), Cell Culture Dish, Cell Culture Plate (Multi-Well), Cell Culture Flask (T75), Petri Dish, Coverslip(s) Laser Features: LED based adjustable intensity (50,000 hour life) Magnification: 460X (optical) to 1840X (with digital zoom) Memory: 2 Gb USB Objectives: Numerical Aperture = 0.45, Fixed 20X Plan Fluorite, Working Distance = 5.9 mm Stage: Open-Stage Platform for Most Cell Vessels Camera Type: 1.3 Megapixels, Monochrome, HAD CCD, 1/3 inch Lighting Type: LED Resolution: Image resolution – 1296 x 964 pixels, Display resolution – 1366 x 768 pixels Dimensions (WxHxD): 400 x 540 x 350 mm Weight: 12.7 kg

Complete system with vacuum pump and 4 liter PP bottle Adjustable extraction speed and non-contact l (more)evel monitoring Vacuum controller: Touchpanel Number of heads/stages: 1/1 Max. pumping speed at 50/60 Hz: 0.7/0.85 m3/h Ultimate vacuum (abs.): 150 mbar Control range: 150 – 850 mbar (adjustable) Collection bottle: 4l Polypropylene Max. back pressure (abs.): 1.1 bar Rated motor speed at 50/60 Hz: 1500/1800 rpm Dimensions (LxWxH): 410 x 194 x 448 mm Weight: 7.3kg

This listing is for a POWERTECNIQUE Pro 3000 Uninterruptible Power Supply (UPS). SELLERS NOTICE: If  (more)you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFFF068

Incubator orbital FS Series. Ideal for incubation with agitation of microbiological cultures. Model (more)s: FS-50B (not refrigerated; temperature of RT+5ºC to 65ºC.); FS-70B (refrigerated; temperature 4ºC to 65ºC.). LCD screen. Control of temperature, time and speed of swing digital. Stability ± 0.1 º. Uniformity ± 1°. Variable speed of 30 to 300 rpm. Resolution 0.1 ºC, ± 1rpm. Timer from 1 min to 9999min. Engine without maintenance. Alarms. Capacity FS-50B: 10 kg; 100ml*16/250*10/500*6 (includes 8 clamps for flask of 250 mL). Capacity FS-70B: 15 kg; 100ml*28/250*15/500*8/1000*6 (includes 12 clamps for flask of 250 mL). It shows the price for the model FS-50B. For other models, use the drop-down.

Manufacturer: Waters / X Bridge Model: XBridge BEH C18 Column, 130Å, 3.5 µm, 3 mm X 50 mm P/N: 1860 (more)03026 Description: As a workhorse for HPLC method development, XBridge BEH C18 sorbent can be used over an entire range of mobile phase pH (1-12). The trifunctionally bonded C18 ligand provides you with a universal column for most HPLC separations and gives you the widest usable pH range, superior low pH stability, and ultra-low column bleed. Specifications: % Carbon Load: 18 Brand: XBridge Chemistry: C18 Endcapped: Yes Format: Column ID: 3 mm Length (mm): 50 mm Mode: Reversed-Phase Particle Shape: Spherical Particle Size (dp): 3.5 µm Particle Substrate: Hybrid Pore Size: 130Å Silanol Activity: Low Surface Area: 185 System: HPLC Technology: BEH USP Classification: L1 Units in Package: 1/pkg pH Range: 1 - 12 The column is in brand new condition, packed and sealed in box - never used.

KNF LIQUIPORT IP65 NF 100 FT.18RC Diaphragm Liquid Transfer Pump Flow Rate 0.2 to 1.3 l/min Suction (more) Height (max.) 3 mWg Pressure (max.) 1 bar (rel.) Features - Small footprint - Simple, intuitive operation - Manual control - Self-priming, can run dry - Splashproof with IP65 rating - Available with different material configurations for chemical resistance - Maintenance-free - Available pump head materials: PP, PVDF, PTFE - Diaphragm material: PTFE-coated - Valve material: FFKM-Simriz - Output signal fault alarm - Start/Stop through logic control (TTL) Chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Manual control of flow rate with LED indicator. INCLUDED: The KNF LIQUIPORT IP65 NF 100 FT.18RC Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 8mm - Cable for External Control - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson F171201 PIPETMAN DIAMOND Tips DL10ST, 0.1-20uL The Gilson F171201 PIPETMAN DIAMOND Tips DL10S (more)T, 0.1-20uL are designed to fit your PIPETMAN perfectly. They deliver accurate and precise pipetting when used in conjunction with Gilson pipettes. One commercial unit/quantity of the autoclavable TIPACK includes 10 racks of 96 tips (total of 960 already racked tips). These tips are fully autoclavable and color-coded for easy identification while being compliant with Good Laboratory Practice (GLP). Using PIPETMAN DIAMOND Tips with your PIPETMAN ensures maximum accuracy and precision and delivers consistent results. The perfect air-tight seal prevents leaks. The tips are made of pure polypropylene to deliver the correct volume and ensure complete dispensing. Volume graduations make it easy to visually check the volume aspirated. Gilson tips are manufactured in a clean room environment ensuring they are free of detectable contaminants that can affect your results. From mold to bench, our tips are guaranteed, certified, and traceable to meet the most stringent demands in many applications. Uniquely designed TIPACKS feature a dual-purpose lid: hinged to easily open and close while using tips; or simply pull it out of the hinges to set on top or discard for high-throughput tip usage. TIPACKS are compact, ergonomic, and eco-friendly. INCLUDED: The Gilson F171201 PIPETMAN DIAMOND Tips DL10ST, 0.1-20uL includes: - 10 Racks of 96 Non-Filtered Tips - 3 Year Manufacturer's Warranty