Izon Science Ltd - qViro Virus Viral Particle Analysis System Lab

The VELP RESPIROMETRIC BOD sensor is designed to provide a SMART solution to water and wastewater qu (more)ality control laboratories. This tool from Velp was designed to simplify the analysis process and make measurements as quick and easy as possible. - The bright 4-digit LED display provides long battery life compared to other sensors on the market. - Intuitive 2-button interface for easy analysis setup. - Pressure range: 500 ÷ 2000 mbar (hPa). - Results available in BOD (mg/l) and pressure (mbar). - BOD scales: 90, 250, 600, 1000, 4000, higher values ​​after dilution. - Automatic conversion of pressure results to BOD. Technical details: - Electronic pressure sensor. - Bottle volume: 500 ml. - Databox power supply: via USB connected to the PC. - Sampling interval: 30 minutes to 48 hours, depending on the duration of the test. - Data archive: on the sensor, RESPIROSoft™ database and Ermes Cloud. - Measurement period: From 1 to 730 days. Wireless control with DataBox™ and RESPIROSOFT™ software The proposed kit includes the wireless transmitter, for maximum comfort. The RESPIROMETRIC sensors transmit data directly to the PC allowing real-time monitoring of the analysis curve. Data management software is also included in the kit. The DataBox™ transmitter will be able to manage up to 400 RESPIROMETRIC sensors (66 systems). In short, the advantages: - Real-time analysis curve - More important information displayed at a glance - Sensor battery monitoring - Pre-installed methods - Test reports - Comparison of results - Simple and easy management Connect and monitor your sensors to the Ermes cloud wherever you are Improve the laboratory experience and prepare for the future, the connection to the VELP Ermes Cloud will improve the productivity and comfort of laboratory operators. - Real-time display of analyzes with simple and complete graphs, even from different PC, tablet and smartphone locations. - Real-time instrument status. - Advanced support for applications and services. - Access your analysis database anytime, anywhere, all you need is an internet connection. - Create and share analytics reports in multiple formats. - Instant event and alert notifications based on your settings (platform and email).

Mettler Toledo handheld density meter: can be used with one hand and immediately Simplicity is the k (more)ey to success: in a fast-paced work environment, your staff lack the spirit to learn a new tool. This is why METTLER TOLEDO Densito was designed: intuitive, multi-language, with self-explanatory menus and selections. You will be able to set up the instrument in minutes, start measurements quickly and have constant operator guidance throughout the entire measurement and cleaning cycle. The lightweight Densito allows for one-handed use in the lab or on the go. Results are temperature compensated and can be provided in specific gravity, Brix, API units and other formats. Measurement is done using the main joystick, which controls the automatic sampling pump and avoids the effort of manual sampling. A useful function is that of the Limits: set a range of acceptable limits for your products, the results outside this range will be clearly visible on the display for immediate identification. Suitable for any industry There are no limits, both in the laboratory and in the field, the instrument can be used for a huge variety of industrial, scientific and research operations. Uses include: Testing the sulfuric acid battery. Applications Some applications include alcohol concentration in spirits, fermentation process control in wine and beer production, measurement of the Brix degree (sugar content) of intermediate and final products in food and beverage products. Density and other concentration such as API gravity in heavy oils, paraffin and lubricants in the petrochemical industry. Density (specific gravity) in battery acid in the automotive industry, as well as other solvents, acids and bases in the chemical industry. Finally, there are many applications in the pharmaceutical industry, such as specific gravity density measurement in cosmetics, personal care products, and many more. Click the links above to read our detailed applications or access our expertise library to find the right application note based on your sample. With your purchase you will receive: Filling tube 190 mm (tube, syringe connector/filling tube, washer), Li-ion battery 2,400 mAh, power supply and international adapters, USB-C cable, density standard (3 pcs) 6 ml , user manual, declaration of conformity, test report. All DENSITO features, features and how to use it: Unboxing of your future Mettler laboratory densitometer: Specific characteristics: - Measuring range (g/cm³): 0 g/cm3...3 g/cm3 - Accuracy ± (g/cm³): 0.001 g/cm3 - Repeatability (g/cm³): 0.0005 - Resolution (g/cm³): 0.0001 g/cm3 - Sample temperature range: -10°C...50°C - Temperature resolution: 0.1°C - Temperature accuracy (±): 0.2°C - Minimum sample volume: 2.00mL (2mL) - Ambient temperature range: -10°C...50°C - Brix measurement scales; ethanol (alcohol); H2SO4; Try (US and IP); Specific weight; User defined concentration; Plato; APIs; Baumé; Density - Temperature compensation: automatic - Methods: 30 - Results storage: 1100 - Languages: Italian; Polish; Russian; Korean; German; Turkish; English; French; Portuguese; BahasaIndonesia; Chinese; Spanish; Thai Built-in measuring scales: density / specific gravity; Alcohol tables; Acids/bases and chemical tables; User programmable tables/functions; Brix / Sugar tables - PC Software: EasyDirect PC Software for Density and Refractometry - Protection: Yes - Security: Password protection - Color-coded result identification: Yes - Power supply: Li-ion battery; Rechargeable and removable battery - Product type Portable hydrometer - Standards and Standards: ASTM D 1250 - LIMS connectivity: No IF YOU WANT TO KNOW MORE What is Density? On the Mettler website we find an excellent lesson on density and all the information and guides regarding specific applications → ATTENTION! DENSITO is addictive. A cute video: An example of how easy it is to measure viscous samples: IF YOU WANT TO KNOW MORE What is density? On the Mettler website we find an excellent lesson on density and all the information and guides regarding specific applications → Why use Mettler's Densito? In the video below the comparison with hydrometers and pycnometers. The advantages: - Measurement in seconds. - Maximize your accuracy and repeatability. - No tedious cleaning and drying of glassware. Go digital now!

This Skalar San+ Segmented Flow Wet Chemistry Autoanalyser System was removed from a university lab  (more)where it was surplus to requirements. Everything powers up but has not been tested as a system as there is no PC or software. Everything is packed in black flight cases. The system consists of: Skalar San+ Segmented Flow AutoanalyserType - 4000 Skalar SamplerType - 1000 Skalar InterfaceType - 8503 Skalar Temp Control UnitType - 5540 Skalar ReactorType 5521 HP Deskjet 940C Printer There is one box that contains the following Skalen parts/tubing (listed by part number)2 x 262009031 x Astro D-27607 Langen1 x Cogwheel - 223000121 x Spring 6 Pack - 223003174 x Cogwheels for Motor - 223000451 x Rollercage for SA2100 Pump - 223003121 x Motor for SA4000 - 90020766Tubing (Mix of sealed/opened packs):-1 x 51551 x 51501 x 31421 x 31502 x 51411 x 51304 x 10602 x 30242 x 30256 x 30261 x 30273 x 30287 x 30294 x 30304 x 30315 x 30324 x 30331 x 30344 x 30351 x 3036 There another box that contains the following Skalen parts (listed by part number)1 x Start up kit 57038 x 53231 x 10111 x 53131 x 10111 x 52611 x 52161 x 52601 x 92212 x 53255 x 53246 x 52028 x 5210

TCR TECORA  Echo HiVol Hi Volume Sampler System with Accessories This was removed from a univer (more)sity lab where it was surplus to requirements. The system consists of; 1 x Echo HiVol Hi Volume SamplerModel, Echo Hi Vol110VThe unit powers on and is in good cosmetic condition. It was powered on by our Step down from the mains supply (not included).The buttons seem a little slow to respond and there are some tape marks and scuffs and scratches around the unit from general use. The unit is lockable but no key is supplied. It is a barrel lock with the number 252. The barrel is easy to change and it should be easy to find a 252 key. 1 x Delta Wireless SamplerElectronic Flow Sampler w/ Battery packModel Delta110VThe unit powers on and is in good cosmetic condition. We did not charge Battery to test, as we used our Step down from the mains supply. (not included). 1 x Delta Battery packThe unit is in good cosmetic condition. It was not tested. 1 x Flight CaseThere is a large crack at the top of the flight case, but inside the case is in good cosmetic condition. Accessories:All the Accessories are housed in a flight case 1x TCR Fine PM Air Inlet - PM10 200 l/min1X Pair of Marigold industrial gloves (Size 9)1x Metal Dome2x Glass chambers4x keys1x High Volume Sampler for micropollutants Instruction Manual1x Delta Wireless Instruction Manual1x 16A -4h 100-130v 3pin IEC adaptor plug1x length of clear tubing 9.8mm outer diameter x 5.6mm inner diameter1x tripod arm with three prong grip1x widget-HO591X Delta Quick Guide1x TCR Tecora Delta Sampling config sheet1x bag of Flowmeter GR & GRV spares1x Metal Filter attachment The system was not tested further.

This Dionex EG40 Eluent Generator was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up but has not been tested further. It passed self tests. It is in good cosmetic condition with minor marks.

Macherey Nagel PF-11 photometer. Portable photometer for field and laboratory use. For the evaluatio (more)n of VISOCOLOR and VISOCOLOR ECO kits and tests in NANOCOLOR cuvettes. Direct reading in mg/L. Extinction measurement. Cuvette lock for 16 mm round tubes. Easy to use. Photometric pH measurement. Manual wavelength adjustment: 380/405/470/520/605/720 nm. Light source: Tungsten lamp. Powered by four batteries. Suitcase. User manual. The Macherey Nagel PF-11 photometer is designed and built to provide accurate and reliable results. It is recognized and appreciated by experienced analysts who appreciate its easy-to-use and time-saving approach with step-by-step instructions.

MICROM cover slip gluer CTM6 Untested equipment

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

VACUUBRAND Diaphragm and Valve Service Kit for MD 4C NT/VARIO, PC 3003, and PC 3004 Set of diaphragm (more)s and valves for MD 4C NT/VARIO, PC 3003 and PC 3004. INCLUDED: The VACUUBRAND Diaphragm and Valve Service Kit for MD 4C NT/VARIO, PC 3003, and PC 3004 includes: - VACUUBRAND Diaphragm and Valve Service Kit for MD 4C NT/VARIO, PC 3003, and PC 3004 - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark MyBath 8L Digital Water Bath The myBath series is designed to guarantee superior accuracy  (more)and performance in a compact footprint. With four sizes to choose from, there is a myBath to fit every lab. The 8L model includes easy to use controls allow the user to digitaly select and monitor settings. Adjustable in 0.1ºC increments, the temperature is shown on a large, 3-digit display. The proprietary Quik-CAL feature allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. All myBath models feature seamless, stainless steel chambers for easy cleaning and long life The chambers resist rust and have no corners to collect dirt or contamination. The 8L unit has drains for hassle-free water changes and includes a see-through cover that can be removed, or flipped back on a rear hinge to conserve bench space. The lid’s gabled design will divert condensation to the front and back of the bath, away from samples. Racks are available to accommodate 1.5/2.0ml, 15ml and 50 ml tubes. INCLUDED: The Benchmark MyBath 8L Digital Water Bath includes: - Cover - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Adam Equipment STB 3202E Solis Precision Balance, 3200g, 0.01g Capacity 3200g Readability 0.01g Rep (more)eatability 0.02g Features - High-resolution graphic display is amply sized for clear visibility - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Large, grade 304 stainless steel pan allows swift cleaning - RS-232 interface provides speedy connection to computers and printers - External calibration allows for verification and adjustment with weights ("I" models feature internal automatic calibration) - Selectable digital filtering helps minimize effects of vibration and disturbances - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Multilingual display permits use in various regions - Check weighing with audible alarm - Parts counting with preset sample sizes - Security slot for optional lock and cable to help prevent theft The Adam Equipment Solis Precision Balances are ideal for research and quality assurance labs, science education, precision counting, production, and manufacturing applications needing precision results. Users can readily view the comprehensive data on the amply sized graphic display. A multilingual display capability permits use of the balance in various regions, while recognizable icons help the weighing process flow smoothly. Formulation is simplified, as Solis stores up to 99 ingredients. The Solis keypad is simple to use, with easy-to-read buttons and helpful navigation arrows for uncomplicated operation. The Solis Precision Balance line features 11 different models that offer internal or external calibration, capacities from 360g to 8200g, and readabilities from 0.001g to 0.01g. The Solis Precision Balances provide an outstanding solution for a variety of lab applications. INCLUDED: The Adam Equipment STB 3202E Solis Precision Balance, 3200g, 0.01g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty