ZEISS Stemi 2000 Stereo Zoom Microscope Lab

This Leitz Dialux 20 Microscope was removed from a university lab where it was surplus to requiremen (more)ts. The unit powers up and is in good cosmetic condition but has some marks from use. Included with it are; 5 x Objectives Leitz Wetzlar 160/0.17 50/1.00 W Fluoreszenz Leitz Wetzlar 160/- EF 10/0.25 (519760) Leitz Wetzlar 160/0.17 NPL Fluotar 40/0.70. PHACO 2 Leitz Wetzlar 160/0.17 NPL Fluotar 25/0.55. PHACO 2 Leitz Wetzlar 160/0.17 NPL Fluotar 100/1.32 OEL PHACO 3 Leitz 465 Power Supply WILD MPS 51 S Camera-Not tested as the necessary cables are not provided.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This JEOL JEM2011 is being sold on behalf of a university lab where it was surplus to requirements.  (more)The system is was decommissioned in August 2023. The scintillator in the Gatan Multiscan Camera is coming to the end of its life and the Oxford EDX system has not been used in a very long time as the lab was unable to source a PC with the right connectors to support it. The pole piece is URP22_11. The system has now been decommissioned by JEOL and is ready for collection in Fife, Scotland. - JEOL JEM2011 transmission electron microscope, 200 kV operation, LaB6 or W filament - Oxford INCAx-sight/Oxford Link ISIS EDX system - Gatan Multiscan 794 CCD camera, 1024 x 1024 pix The system is sold for spares. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

The CyScope HP is a uniquely innovative microscope, offering LED fluorescence and light microscopy i (more)n a compact design and implementing sophisticated optics. It employs incident light (e.g. UV, royal blue, blue, green, red) and transmitted light detection, either simultaneously or separately. The blue (470nm) and green (528nm) LEDs with their extremely long life of several thousand hours work in a high-power / high-current mode, cooled by a miniature fan. Eyepieces: Partec 10x/23 mm Head: Biinocular 45° angled tubes with interpupillary distance from 55 to 75 mm Nose piece: Four-way Objectives: 20x/0.40, 40x/0.65, 100x/1.25 Oil Focus adjustment: Coaxial 25 mm coarse and fine adjustment Illumination: Transmitted LED set for Köhler illumination. Fluorescent: High Power Green LED (528 nm) Excitation and Emission Set, High Power Blue LED (470 nm) Excitation and Emission Set, Camera: CMOS (color depth 36 bits, 1/2,5” CMOS chip, 2592 x 1944 pixel, including software)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Memmert IPP110eco Peltier-Cooled Forced Circulation Incubator 108L, 115V Setting Temperature Range  (more)Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 108 L (3.8 cu.ft.) Features - 108 L volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Refrigerant-free design with Peltier cooling for maximum energy efficiency and environmentally friendly operation - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert IPP110eco Peltier-Cooled Forced Circulation Incubator 108L, 115V is designed for laboratories that prioritize both precision and sustainability. With a setting temperature range from 0°C to +70°C and a 108-liter capacity, this incubator ensures consistent and versatile temperature control for a wide range of applications. The energy-efficient Peltier heating and cooling system, combined with the ControlCOCKPIT digital controller and high-definition TFT-color display, provides seamless operation. The SetpointWAIT function ensures that processes only begin once the set temperature is reached, maximizing precision, while the three freely selectable calibration points further enhance accuracy. This environmentally friendly incubator features a refrigerant-free design, making it a sustainable choice for laboratories. The durable, corrosion-resistant stainless steel interior and textured stainless steel casing are built to last, ensuring long-term reliability. With a maximum chamber load of 330 lbs and support for up to five shelves, the IPP110eco accommodates large or multiple samples with ease. Safety is enhanced by an adjustable electronic overtemperature monitor and mechanical temperature limiter, while the autodiagnostic system provides fault analysis to ensure smooth operation. This incubator offers a perfect blend of precision, energy efficiency, and eco-conscious design. INCLUDED: The Memmert IPP110eco Peltier-Cooled Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Voltage range: 10000 V Current range: 3 mA