Zeiss Axiovert 25 Inverted Fluorescence Phase Contrast Microscope Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Olympus U-ETBI Microscope Ergo Head Tilt Telescope was removed from a university lab where it w (more)as surplus to requirements. Item appears to function correctly after being tested over a light source and slide and is in very good, clean condition. No further testing was carried out.

Leica DMR Type 020-525.735 Fluorescence Microscope Lab This item was removed from a university where (more) it was surplus to requirement. It is in good cosmetic condition and powers on with the bottom-mounted lamp in good working order. We are unable to test the top-mounted lamp as the required power supply is not included. Includes with the microscope are the following: - Leica MPS 60 Camera - Leica ∞/0.17 C Plan 100x/1.25 Oil Objective - Leica ∞/-/A N Plan 5x/0.12 Objective - 504058 Leica Illuminator - Leica 807-072.057 Lamp Module (damaged) - Box of misc tools and accessories

Nikon Eclipse TE300 Inverted Fluorescence Microscope System Lab This was removed from a university l (more)ab where it was surplus to requirements. This system is in good cosmetic condition with all included units in working order. 1 x Nikon Eclipse TE300 body fitted with:1 x Nikon 065851 multi position binocular neck.1 x Nikon manual stage.1 x Nikon filter holder, no filters fitted.1 x Nikon Condenser Turret fitted with 1 x LWD ∞ Ph3 & 1 x Blanking plate.The other 3 blanking plates are missing.1 x Nikon LWD 0.522 x Nikon CFI 10x/22 eyepieces.1 x Nikon Plan Flour20x/0.50Ph1 DLLObjective. 1 x Nikon LHS-H100P-1 Halogen 12v 100w Lamp.1 x Nikon TE-PSE100 Power supply with control cable. 1 x Nikon LH-M100C-1 Mercury 100w Lamp. (Run hours not known, bulb will require replacement).1 x Nikon C-SHG1 Power Supply. (Run time counter reset).

Ohaus a-AP50MM-B Photometer Fixed Wavelength 365 nm; 420 nm; 455 nm; 525 nm; 560 nm; 570 nm; 630 nm  (more)Photometric Measuring Range 0 Abs to 1 Abs Wavelength Accuracy ±1.0nm Features - The AP50MM is equipped with a real-time dynamic display for eachmeasurement, to provide fast, reliable results - Can record up to 30,000 datapointswith time and date stamp - Built-in calibration curves provide automatic selection of appropriatewavelengths from the long-lasting LED light source, store commonly used tests for efficiency - Large, backlit display makes it easier to read real-time results - Fixed wavelengths: 365 nm, 420 nm, 455 nm, 525 nm, 560 nm, 570 nm, 630 nm - Turbidity optical system based on nephelometric measurement - Photometric accuracy of ± 0.005 Abs at 1.0 Abs nominal - Compact and lightweight design weighing only 1.32 lb (0.6 kg) - Operates on 4 AA (LR6) batteries with a typical life of 6 months The Ohaus a-AP50MM-B Photometer is a standalone, multifunctional device designed for fast and reliable colorimetric and turbidity measurements in field applications. Engineered with a compact, rugged design, this photometer provides exceptional performance with a real-time dynamic display for each measurement, allowing for precise and efficient analysis. Capable of storing up to 30,000 data points with time and date stamps, it ensures seamless data management for professional use. The a-AP50MM-B features built-in calibration curves that automatically select the optimal wavelength from its advanced LED light source, including near-UV at 365 nm, making it highly versatile for various testing requirements. A large, backlit graphical LCD offers clear visibility of results, even in low-light conditions, while the device’s nephelometric turbidity optical system ensures accurate measurements ranging from 0 to 200 NTU. With its lightweight construction at just 1.32 lbs and operation powered by 4 AA batteries lasting up to six months, the a-AP50MM-B is perfect for on-the-go applications. While this model does not include additional accessories like the a-AP50MM-F, it delivers all the essential features for high-quality analysis, making it a reliable choice for water sample testing in diverse environments. INCLUDED: The Ohaus a-AP50MM-B Photometer includes: - >Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

2 racks of 24 stainless steel test tubes D: 20/21mm In stainless steel 2 laboratory racks of 24 tube (more)s (6 out of 4) For tube diameter: 20 or 21 mm

Manufacturer: Retsch Model: 25ml grinding bowl stainless steel P/N: 02.462.0119 Key features:  - Wit (more)h cover.  - The approximate composition is 84.5% Fe, 13% Cr.  - The approximate density is 7700 kg/m3.  - Can contain a sample volume of 4 to 10 ml  - The maximum particle size in the container is 6 mm  - The recommended ball charge for the container is one piece, 20 mm; or two pieces, 12 mm   Scope of delivery:   - Stainless steel grinding bowl 25ml - Stainless steel lid The grinding bowl is in very good condition and has been 100% function tested.

The Agilent 2100 Bioanalyzer is a unique and versatile analysis tool designed to efficiently handle  (more)nucleic acids, proteins and cells on a single platform. Designed to eliminate time-consuming procedures, the Agilent 2100 system employs micro-fabricated chips which accommodate up to 12-wells requiring minimum sample consumption in the low µl-range. The compact and powerful system design of this Agilent Bionalyzer enables easy, fast, and efficient sample handling, detection, separation, and data analysis. The 2100 system prevents potential mistakes in data interpretation and storage using its efficient lab-on-a-chip technology. This bioanalyzer helps enhance PCR reactions for a variety of procedures including gene expression and  cloning. With its advanced microarrays and microarray scanner, the Agilent 2100 provides accurate solutions for gene expression analysis. The device can be used with Agilent’s add-on pressure cartridge, cell fluorescence software, and Cell LabChip for a wide range of cell applications and cytometric analyses (all not included).

F2 Mass Standard - knob weights with adjustment chamber. Nominal value - 5 g.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

IKA ROTATEMP me-vi Viscometer Package Viscosity Measuring Range 40,000,000 mPas Speed Range 0.01 to  (more)200 rpm Time Setting Range 0.017 to 6000 min Features - The combination of ROTAVISC viscometer and ROTATEMP high-temperature system simplifies the viscosity measurement of difficult-to-measure, highly viscous samples. - The complete system is supplied ready for connection. With its space-saving design, it fits easily into any laboratory. - ROTAVISC and ROTATEMP are compatible with the labworldsoft ® laboratory software, which makes it easy to automate, control and document your measurement results. - Samples can reach 300°C in 16 minutes without overheating. The ROTATEMP me-vi Package is the ideal solution for precise and reliable viscosity measurement of difficult-to-measure, highly viscous samples. The package combines the ROTAVISC me-vi rotational viscometer with the ROTATEMP high-temperature system to ensure optimum temperature control during the measurement process. ROTAVISC me-vi is a high-performance rotational viscometer for applications in a measuring range from 100 to 40,000,000 mPas. The space-saving ROTATEMP high-temperature system is the perfect complement for measuring temperature-dependent samples that are not able to flow at room temperature, such as asphalt, bitumen, wax, polymers, candy base or hot melt adhesives. Thanks to precise and efficient temperature control, based on the proven IKA magnetic stirrer technology, samples can be heated up to 300 °C in just 16 minutes without overheating. This allows precise and reproducible measurements to be carried out. INCLUDED: The IKA ROTATEMP me-vi Viscometer Package includes: - ROTAVISC me-vi control S000 - ROTASTAND - ROTATEMP - SP set-2 - PT 100.8 - Power Cord - Operator's Guide - Two Year Manufacturer's Warranty