Zeiss Axiostar Binocular Transmitted Light Microscope

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requir (more)ements. Included are; 1x Olympus FluoviewModel FV1000 The unit is in good cosmetic condition, but the power cables were missing so it has not been tested. The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed. 1x Olympus Transmitted Light Detector:Model FV10-TDThe unit is in good cosmetic condition. 1x Olympus Control Box:Model IX2 UCBThe unit powers on and is in good cosmetic condition. 1x Olympus Power Supply:Model FV10-PSUThe unit powers on and is in good cosmetic condition. 1x FV10-PSU Key:Model 1201 The unit is in good cosmetic condition. 1x Olympus Hand-switch:Model U-HSTR2The item powers on and is in a reasonable, used cosmetic condition. 1x Olympus Laser Diode Interface Controller:Model FV10-LDIFThe unit is in good cosmetic condition. The PSU is missing. 1x Olympus Power Supply:Model U-RFL-T200Life Time: 3667 hoursThe unit powers on and is in good cosmetic condition. It is not known if the Burner has been replaced after 200 hours. 1x Olympus Mercury Light Source:Model U-LH100GThe unit powers on and is in good cosmetic condition. The Lamp is working. 1x Olympus Light Source StandModel FV10-FIRThe unit is in good cosmetic condition. There are some scuffs and scratches from general use. 1x Olympus Power Supply:Model FV5-LDPSURunning hours: 79335.3 The unit powers on and is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units. 1x FV5-LDPSU Olympus Power Supply Key:Model 1201The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply. 1x Olympus Laser HeadModel LD405The unit is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply. 1x IW-R3000N Rack Mountable Server ChassisThe unit powers on and is in good cosmetic condition. Accessories: 1x Olympus objective correction capModel CAP-G0.5 ± 0.5The unit is in good cosmetic condition 1x Olympus Laser safety shutterModel F10-SHAUXThe unit is in good cosmetic condition. 1x Olympus Goose neck fibre optic light pipesModel LGS3F1200UVThe unit is in good cosmetic condition. Spacers: 2x L3cm xW3cm xH0.5cm 2x L4cm x W4cm x H0.5cm The units are in good cosmetic condition. Misc Accessories: 1x IW-R3000N Rack Mountable Server Chassis User manual V2.11x Microsoft Windows 2000 XP professional Inst/uninst CD1x Belkin Serial Adaptor 1x RCA Phono male to male cable (sealed)1x SATA Cable (C13214-001 FOXCON 0550)1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable 1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor1x RCA Female to mini DIN 8-PIN connector (sealed)1x VGA to DVI connector (sealed) Installation discs:2x Belkin USB Adaptor Installation1x Intel Express installer1x Sapphire installation driver 1x mini disc

This Olympus BX45TF Ergonomic Microscope was removed from a university lab where it was surplus to r (more)equirements. The item is in good condition and all dials are fully functional. However, it is missing the left eyepiece rubber cup. Objectives included: Olympus UPlanFI - 10x/0.30 ∞/-Olympus UPlanPL N - 100X/1.30 Oil ∞/0.17/FN26.5 Eyepieces included: 2 x Olympus WH12.5x/16mm

Motic B1-253SP LED Binocular Compound Microscope Magnification Range 4x to 100x Optical System Finit (more)e, 160mm Illumination 3W LED Features - For basic work in biology and medicine - View sections, smears, and other transparent samples - Trinocular head - Semi-Planachromatic SP - 3W LED Illumination - Robust and sturdy base - Phase contrast, Dark field, and Polarization accessories optionally available - Coarse focusing system with tension adjustment - Switching power supply for use worldwide (100-240V) Superior in design and in performance, the B1 Series incorporates a wide range of features designed for university and laboratory use. Superb optical clarity and reliable mechanical engineering assures years of top performance. Choose from two grades of objectives: Standard Achromatic lenses deliver excellent clarity and normal flatness of field, while the ASC Achromatic Super Contrast objectives deliver extra contrast to the image. Combined with precision coaxial coarse and fine focusing adjustments, the B1 models are exceptionally high quality microscopes available within a tight budget. The B1 series also comes equipped with a new rack-less stage, which allows the microscope to be used in different current and future tenders. In order to provide enough light to Brightfield, Phase Contrast as well as Darkfield applications, the illumination has been changed to Motic’s powerful true 3W LED keeping the system cool as well as properly illuminated with steady color-temperature. INCLUDED: The Motic B1-253SP LED Binocular Compound Microscope includes: - Trinocular head inclined 45º and 360º rotating - Widefield eyepieces WF10X / 18mm - Quadruple nosepiece - Semi-Plan Achromatic Objectives: 4X, A 10X, 40X S, 100X S-Oil - Built in low position coaxial Rackless mechanical stage - Focusable 1.25 N.A. Abbe condenser - Iris diaphragm with filter holder - LED illumination 3W with intensity control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic AE2000 LED Trinocular Inverted Microscope - Basic Package Magnification Range 4x to 10x Optica (more)l System Colour Corrected Infinity (CCIS) Illumination 3W LED Features - Entry level model of Motic's inverted microscopes - Designed for routine live cell inspection with an easy and flexible set up - Offers superior image quality when viewing cell cultures in microbiology, living organisms, and tissue - Switch from Brightfield to Phase Contrast by a simple push of the phase ring slider - Fixed stage plate carries a glass or metal insert for quick overview and comfortable change of objectives - Coaxial coarse and fine focusing system with tension adjustment - Fine focus precision of 2 μm - Auto ON-OFF illumination function via built-in IR-sensor - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The AE2000 is a revolutionary design that is packed with features and sets a new benchmark in affordable inverted microscopy. The AE2000 microscopes are Motic’s entry models of inverted microscopes, providing a flexible optical concept to meet best image quality and robust design for a long lifetime under rough lab conditions. This version of the Motic AE2000 is an inverted microscope with a trinocular head as well as 4X and 10X objectives. The AE2000 is the perfect microscope for routine microbiology in clinical and pharmaceutical laboratories, also offering best options for university teaching. In full accordance with Motic’s CCIS Infinity System, the LWD Plan Achromatic objectives with an ingenious Phase contrast concept deliver a remarkable image quality. The AE2000 stand carries a quadruple nosepiece with a precise click stop of objective positions. Rich illumination power is given by the 30 Watt Halogen light source in a Fixed-Koehler setup, simply interchangeable with 3W LED modules of different color temperatures. INCLUDED: Motic AE2000 LED Trinocular Inverted Microscope - Basic Package includes: - Widefield High Eyepoint Eyepiece N-WF 10X / 20mm - Side Facing Quadruple Nosepiece - PL PH 4x and PL PH 10x Objectives - Phase Slider Ph0, BF, Ph1 - Centering Telescope & Keys - Plain Stage with Metal & Glass Inserts - 45mm Blue, Green and Neutral Density Filters - ELWD Condenser N.A. 0.30 (WD = 72mm) with Filter Holder - Allen Hexagonal Key and Vinyl Dust Cover - 3W LED with Intensity Control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Manufacturer: Cohesive Technologies Model: TurboFlow HTLC Cyclone 0.5 x 50 mm P/N: 952661 Specificat (more)ion:Compound      Time Symmetry Width1. Acetone       0,985 0,705  0,2122. Butyl Paraben     1,807 0,770  0,695Reduced plate height (acetone) = 6,4 Item delivered:- 1 x TurboFlow HTLC Cyclone 0.5 x 50 mm Conditionen:The column is in new condition.

This Genetix Qpix2 Benchtop Colony Picker was removed from a university lab where it was surplus to  (more)requirements. The lab said it was fully working prior to removal but unfortunately it seems like the dongle for the software has been misplaced. Included are; 1 x Genetix Qpix2 Benchtop Colony PickerInside dims - D67 W100 H35cmWe powered up the unit but were unable to test if further. Inside side panel of bottom unit - Jun-Air Model 400 Oil-Less Compressor - It powers on and works 1 x PC, Monitor, Keyboard & Mouse - All power on and work, the pc has the software listed below. The item is in a reasonable, used cosmetic condition. Manuals/Software:-QPix2 User ManualReplicating Application GuideGridding Application GuidePicking Application GuideQSoft Data Tracking Application GuideQFill2 User ManualQScan User GuideaQuire User GuideDiscs:-QSoft xp Build 6400.16QSoft xp Build 6100.11QSoft xp Build 6300.01QScan beta 1QP2231 (Floppy Disk) Boxed Accessories/Consumables include:-Metrologic Scanner6 x Master PL-L 840/4P Light bulbsLots of various Slides inc. brands Genetix & EZ-RaysGenetix Micro Spotting PinsGenetix Microarray Spotting SolutionVarious Packs of Glass Beads2 x Plastibrand Tip-RacksVarious other spare bits/parts16 x New & Sealed Boxes of VWR Micro Centrifuge Tubes (2ml) 500/pack (10 Packs in box)8 x Boxes of ISS 2ml Microtubes with Separate White Caps Gamma Iradiated (4 x Ref MT0075IR)1 x Box of ISS 10ml Specimen Collection Tubes (QTY 500)

Memmert HPP1060eco Climate Chamber 1060L, 115V Setting Temperature Range (without light, with humidi (more)ty) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 1060 L (37.4 cu. ft.) Features - Generous volume capacity of 1060 L (37.4 cu. ft.) for versatile climate and stability testing - Temperature range settings from +5 to +70°C with humidity, and 0 to +70°C without humidity - Precise temperature control with 0.1°C setting accuracy and dual Pt100 sensors for reliable performance - Humidity range adjustable from 10% to 90% RH with efficient hot steam generator and Peltier dehumidification - Intuitive TwinDISPLAY ControlCOCKPIT featuring two high-definition TFT-color displays - Multi-language settings with support for German, English, Spanish, French, Polish, Czech, and Hungarian - Durable stainless steel door with 2-point locking and interior glass door for added insulation - Convenient data programming and management with AtmoCONTROL software via USB or Ethernet The Memmert HPP1060eco Climate Chamber 1060L, 115V is expertly designed to provide consistent and precise environmental conditions for sensitive testing applications. With a spacious 1060 L (37.4 cu. ft.) interior, it offers ample space for extensive climate and stability testing needs. Its temperature range spans from +5 to +70°C with humidity and 0 to +70°C without humidity, providing versatility for a wide array of research and material testing scenarios. The highly accurate 0.1°C temperature setting resolution, powered by dual Pt100 sensors, ensures reliable readings and consistent conditions essential for exacting scientific requirements. The HPP1060eco integrates cutting-edge control technology with its TwinDISPLAY ControlCOCKPIT, featuring dual high-definition TFT-color displays for real-time monitoring and adjustments. Designed with an energy-efficient Peltier heating and cooling system, it utilizes advanced humidification by hot steam generator and Peltier-driven dehumidification, delivering dependable humidity control within a range of 10 to 90% RH. Programmed and managed through AtmoCONTROL software, accessible via USB or Ethernet, this climate chamber also includes AutoSAFETY temperature protection, visual and acoustic alarms, and built-in self-diagnostics. Ideal for ICH-compliant stability testing and environmental simulations, this durable, stainless-steel chamber ensures reliability, precision, and performance in any lab setting. INCLUDED: TheMemmert HPP1060eco Climate Chamber 1060L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Benchmark myBlock II Dry Bath, Dual PositionBenchmark’s myBlock series is a “next generation” produc (more)t line that introduces several major advantages over traditional dry baths. They are the first digital dry baths to include advanced microprocessor controls, timed or continuous operation and a removable hinged lid. In addition, an optional external temperature feedback probe can be positioned directly inside a sample tube, providing real-time control and monitoring of actual sample temperature.The myBlock’s transparent lid helps to promote better uniformity and minimize temperature stratification in the block by maintaining a warm air jacket layer. It also helps to reduce energy consumption by minimizing heat loss to the environment. The hinged lid can be flipped open (to the rear), or easily removed (lifted off) to accommodate taller tubes. Both the single and dual block models can be ordered in a configuration that includes our unique Quick-Flip™ blocks. These universal blocks accept tubes from 0.5 to 2.0ml and, with just a quick flip to the other side, accomodate 0.2ml tubes, PCR strips or (in the dual block model only) a PCR plate. Other blocks are available for tubes up to 50ml. *Block sold separately* Click Here to View Product Video INCLUDED: The Benchmark myBlock II Dry Bath, Dual Position includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty