Zeiss Axioskop 2 Plus Microscope With FluoArc Power Supply Lab

This listing is for a VWR VisiScope IT404 MicroscopeVisiScope IT 404 inverted microscope offers a co (more)mplete solution for your brightfield observations. The IT 404 inverted microscope is equipped with a full set of objectives that covers most standard applications. A mechanical stage is included along with 4 objectives (4x and 40x for brightfield; 10x and 20x for phase contrast).The light ring of the adjustable phase contrast slider is pre-centered when the microscope leaves the factory. It should therefore need no further adjustment. If a re-centering is needed, it can be performed via the two side bolts. The 4X/10X light ring must be used with 4X and 10X phasecontrast objectives, the 20x/40x light ring with the 20x and40x and the opening is used for bright field.The Moticam 5 is an attachable digital C-mount camera with CMOS-Sensor and it features a 5MP live resolution capability along with:- Live resolution: 5.0MP (2592x1944)- Optical calculation: 1/2,5"- Output: MiniUSB- Focusable lens: 12mm- 2 variable diameter eyepiece adapters- Macrotube for specimens observation- Motic Images Plus 2.0 for PC and MAC- Motic 4-dot calibration slideFeatures:- Ergonomic:Every control is easy to reach and every component has been designed with ease of use in mind. Focusing and specimen movement controls allow the wrists to rest on the bench. Light intensity adjustment is placed very close to the focusing knobs. The specimen stage is fitted with a special glass insert that allows you to see the objectives for immediate identification of the magnification set-up. An ergo head allows compensation for operator height.- Efficiency:Plan achromatic, infinity corrected optics, bright 8 W LED illuminator, phase contrastset, holders for specimen slides, flasks, Petri dishes, trinocular head for photo/ video applications. These are the features of IT 404, a powerful, complete and innovative instrument, designed to set a reference standard for routine and advanced tissue culture.- User comfort:The 22 mm extra widefield optics are pleasant to use minimising operator stress. The special eyepieces are designed for eyeglass wearers.- Objectives:Long working distance (LWD) infinity corrected (IOS) plan achromatic: 4x/0,10 (working distance 18 mm), phase contrast 10x/0,25 (working distance 10 mm), phase contrast 20x/0,40 (working distance 5,1 mm), 40x/0,60 (working distance 2,6 mm), corrected for 1,2 mm cover glass.

Nikon Eclipse TE300 Inverted Fluorescence Microscope This item was removed from a university laborat (more)ory where it was surplus to requirements. It powers on using a power supply from a different item, but no power supply is included. Bulbs are in full working order. The item is in good cosmetic condition.As it is not a complete microscope, it is listed as Spares/Repair. The systems was professionally serviced and the following was discovered. • No evidence of salt corrosion detected.• DIC nosepiece present but objectives missing.• External power supply working & remote cable present.• Some damage to condenser lens (LWD 0.52) detected – not detrimental to image quality.• No phase or DIC modules present within condenser & no blanking plates fitted.• No fluorescence attachment or filter slider.• Focus spindle gear is cracked.• Some external shutters and filter wheels but incomplete.• Has an Orbit Monochromator controller – incomplete.• Missing stage plates.• Front photo port bung missing. Includes:- Nikon Condenser Turret Model#: Nikon LWD 0.52 - Nikon Binocular Head Serial#: 063482 No eyepieces or objectives are included. No bulb/light source is included. Model: TE300 TE-DH100WSerial No.: 413419

Carl Zeiss Axiovert S 100 TV Inverted Microscope The unit powers up but has not been tested as we d (more)o not have the objectives. It has received a full clean of all optical components and the realignment of the light path was completed. All mechanical parts were fully lubricated and reassembled. Missing focus spindle (confocal removed. It is in good cosmetic condition with minor marks.

Carl Zeiss Axioskop El Einsatz Fluorescence Microscope w/ 5 Objectives This was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. It is made up of the following modules; Carl Zeiss Axioskop El Einsatz Fluorescence MicroscopeModel: AxioskopSerial# : 23 7412 Carl Zeiss Microscope Power Supply VHW 50f-2bModel: VHW 50f-2bSerial#: 39 26 42Lamp hours: 254.24 Carl Zeiss NAG 2, 12V 100W Stab Power SupplyModel: NAG 2 12V 100WSerial#: 39 25 85 Carl Zeiss HBO 50 Lamp housingModel: HBO 50Serial#: 44 72 20 Carl Zeiss 12V 100W Halogen HAL LamphouseModel: 12V 100W Halogen HALSerial#: 44 72 18 Pl 10x/20 Eyepiece x 2 Serial#: 44 40 32 The following Objectives: Zeiss Plan-NEOFLUAR2,5x/0,075 ∞/-Serial#: 44 03 10 Zeiss ACHROPLAN40x/0,65 ∞/0,17Serial#: 44 00 50 Olympus SPlan20PL0,46 160/0,17Serial#: 80 63 58 Zeiss ACHROPLAN10x/0,25 Ph1 ∞/-Serial#: 44 00 31 Zeiss ACHROSTIGMAT5x/0,12 ∞/-Serial#: 44 01 20

Nikon OPTIPHOT-2 Microscope System with Sony CCD-IRIS Camera This system was removed from a universi (more)ty lab where it was surplus to requirements. All included item are in good cosmetic condition. The microscope powered on via test leads due to a disconnected door trip switch.Voltage selector, lamps, and stage movement are all functioning correctly. The cabinet is faulty, but the scope inside is operational. System Components: - Microscope Base: Nikon OPTIPHOT-2 with Nikon Transformer Model UN - Objectives Included: - Nikon 241187 M Plan 40/0.40 210/0 SLWD - Nikon 322002 M Plan 100 0.90 Dry 210/0 - Nikon 322580 M Plan 60 0.80 210/0 - Nikon 334439 M Plan 40 0.65 210/0 - Nikon 328356 M Plan 20 0.4 LWD 210/0 - Additional Equipment: - Bruker Infrared Microscope Power Supply - Door Trip Switch Override - Sony CCD-IRIS Camera Condition and Testing:The microscope was powered on using test IEC leads due to the door trip switch being disconnected, preventing a direct power connection.- Voltage selector is operational. - Both lamps power on as expected. - Stage movement is functioning correctly.

FISHER SCIENTIFIC AU125 universal oven / incubator / 200 °C / 125 Litres Maximum temperature: 200 °C (more) Temperature range: Ambient + 5 ° C -> 200 ° C With forced convection FISHERBRAND Capacity: 125 Litres 2 perforated stainless steel shelves Approximate interior dimensions: 500 x 500 x 470 mm Approximate exterior dimensions: 700x 700 x 800 mm (WxHxD) 1500 W / 220V Tested at 50 ° C / 100 ° C / 150 ° C It must be set to 156 ° C to have 150 ° C. It is therefore necessary to add 4% to the desired value. (for example to have 105°C you have to put 109°C) In terms of linearity and fluctuation, it is very good, the temperature fluctuates by more or less 0.3°C light traces inside and the stainless steel exterior walls

The HX7.4P H pallet scale is outfitted with a 4-load-cell mechanical design, made of AISI304 stainle (more)ss steel, which has been invented for weighing pallets. The scale is mainly intended for Euro and transport pallets of respective size, i.e. 800 × 1200 mm. The load can be put onto the pan using a forklift. The scale is controlled via a cutting-edge indicator, the PUE HX7 offering a 7" graphic display and a diode bar graph which signals a current load mass related to the scale range or declared minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Labconco 900ml Complete Fast-Freeze Flask Complete Flask consists of 7542900Flask Bottom, 7544400 Fl (more)ask Top and a supply of filter paper.Fast-Freeze Flasks attach withadapters to valve ports on Labconco Drying Chambers and Manifolds. They areavailable in clear or amber-colored glass. A complete Fast-Freeze Flaskconsists of a rubber top, glass bottom and a supply of filter paper.Tops, bottoms and filter paper areavailable separately as replacement components. Adapters are available inborosilicate glass or stainless steel. Fast-Freeze Flasks and Adapters arecompatible with any brand freeze dryer that has 1/2" or 3/4" diametervalve ports.Glass flasks withstand maximumtemperature of 490º C. Flask toppers withstand a maximum temperature of450º C.INCLUDED: The Labconco 7540900 900ml Complete Fast-Freeze Flask includes: - Flask Bottom & Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA DB 4.5 Round Bottom Tubes Dry Block (15/16 mm)