Vision Engineering SX45 Trinocular Stereo Microscope

This Zeiss Axioskop Fluorescence Microscope System was removed from a university lab where it was su (more)rplus to requirements. The unit powers up and is in good cosmetic condition but has some marks from use. Does not include PSU for the mercury lamp, but it has been tested. Included with it are; 2 x Eyepieces Zeiss Pl 10x/20 (44 40 32) 3 x objectives Zeiss plan-NEOFLUAR 100x/1,30 oil (44 04 81) PH3 Zeiss plan-NEOFLUAR 40x/0.75 oil (44 03 51) PH2 Zeiss plan-NEOFLUAR 20x/0.50 oil (44 03 41) Ph2

MOTIC AE31 Series Inverted MicroscopeModel-MOTIC AE31S/N-10900001081 This microscope was removed fro (more)m a university where it was surplus to requirement. It powers up and is in good cosmetic condition.All mechanical elements are in good working order. Includes the following: Objectives.MOTIC 4X/0.10 WD 23.5MOTIC PH10x/0.25 WD 7.5MOTIC LWD PH20x/0.40 WD 7.0MOTIC LWD PH40x/0.60 WD 2.8 Eyepieces.2 x WFPL10X/22

Nikon D-Eclipse C1 System With Melles Griot Accessories This system was removed from a university l (more)ab where it was surplus to requirements. The system powers up but has not been tested further for safety reasons. Included are the following; Nikon D-Eclipse C1-LU3EXMelles Griot 35-IMA-840-019Melles Griot 05-LHP-991Melles Griot 56ICS/S2695Melles Griot 25-LGP-193-230

Stemi 305 is a compact stereo microscope with 5:1 zoom for biological education, labs and industrial (more) production environments.

Thermal shaker with Ohaus incubator OHAUS thermal agitators are designed for applications that requi (more)re constant and precise high-speed shaking, with heating or cooling. The temperature control allows to reach 17°C below the ambient temperature (for the model with cooling) up to 100°C. In case of high accuracy, the temperature can be calibrated by the user. Thanks to interchangeable blocks it is possible to customize the instrument for different applications, housing test tubes or microplates. The intuitive touchscreen allows the operator to view all program steps and monitor the entire process with a simple glance. - Best-in-class thermal performance thanks to advanced electronics and software. Up to 17°C below ambient temperature. - The intuitive touchscreen simplifies use and programming, with complete functions and help screens in six different languages, to assist the operator while using the unit - Easy creation of programs for repetitive applications. Memory for five different five-step programs. The USB port allows you to transfer test data to a flash drive for data collection and program storage Applications DNA, RNA, cell cultures, hybridizations, protein studies Display 4.3-inch (10.9 cm) color liquid crystal touchscreen (LCD) display, programmable in six languages Operation Detachable three-wire cable and plug (included). The unit requires a lock. Compatible with Eppendorf Thermomixer® R blocks Communication The USB port guarantees great flexibility in data collection and transfer Structure Cold-touch Valox construction, removable plastic rack, cover and screwdriver for block removal (included) Construction features Hot Cover Indicator, Audible Alarm, Maximum Temperature Limitation Function, Temperature Priority Function, Pulse / Fast Mix Mode, Temperature Calibration Mode, Temperature Rise Rate Function Technical Characteristics Specifications of the ISTHBLHTS model - Orbital movement, 3mm - Temperature calibration - USB - Brushless DC Motor Transmission - Heating rate (/min): 5°C/min - Safety Certification: CE; TUV - Speed ​​Accuracy: ±2% - Temperature accuracy (±): +/- 0.5°C between 20°C and 45°C; +/-2°C between 20°C and 45°C - Timer: from 1 second to 99 hours and 59 minutes

Heidolph MR-Hei Standard hot plate stirrer. Maximum temperature of the plate 300 °C (250 °C of the s (more)ample), accuracy ± 1 °C, heating power of 820W. Speed up to 1400 rpm. Maximum capacity 20L. Ceramic coated 145 mm Ø plate. Heidolph MR Hei-Standard hot plate stirrers are suitable for all standard applications. They have protection against overheating that turns off the equipment if the set temperature is exceeded by 25 °C. Rotation uniformity even at very low revolutions. Suitable for continuous operation. Chemically resistant.

Balance of analytical precision brand new. Readability 0,001 g. Capacity 150g. Linearity ≤±0,003 mg  (more)Repeatability, ≤± 0,0015 mg Range of temperature (0-40ºC) Diameter of plate: 100mm. Lever system monolithic double. Automatic calibration weight, external. Digital display. Counting, weighing in percent, net-total, conversion of the unit of mass, weighing animals. Includes manual. Specifications

Autoclaves BIOBASE BKQ-BII Series. Models of 50, 75 and 120 litres. Pre-vacuum. Temperature 105 ºC  (more)to 136ºC. Precision ± 0.1 ºC. The working pressure of 1,75 Bar. Timer 0-999 min. Preset programs. Baskets 1 to 3, depending on the model. Printer. Filter-water inlet. LED screen. Internal circulation of steam/water. Lid opening type steering wheel, locking with board autostretch. The process of water filling, pre-vacuum, heating, sterilizing, draining and drying functions automatically. Vapor extraction selectable fast/slow to avoid overflow of liquids. Safety Control: over-pressure, overheating, overvoltage, antisecado and door open. The price shown is for the model 50 liters. For larger volumes, select model drop-down. Biobase BKQ-BII Series Vertical Autoclaves are reliable and efficient sterilization equipment. Designed with a vertical structure, these autoclaves take up less space and are easy to operate. They feature an automatic control system that ensures precise and safe sterilization. With a capacity of up to 120 liters, these autoclaves are ideal for laboratories, hospitals, and research centers. Moreover, they are equipped with printing functions, overheat and overpressure protection, making it highly safe to use. With its modern design and reliable performance, Biobase BKQ-BII Series Vertical Autoclaves are an excellent choice for any sterilization environment.

RS 232 cable: scale (PUE H315, PUE 5 indicator) - computer. Standard cable length: 2 m Customized ca (more)ble length (extra charge): 5 m, 10 m Compatible with: Scales operated via PUE 5.15 (5.19) terminal PUE 5.15 (5.19) terminal Scales operated via PUE H315 terminal PUE H315 terminal

Four-sensor powder-coated platforms are a type of industrial scales that have four load cells (strai (more)n gauges) located in each corner of the platform, ensuring accurate measurements regardless of where the load is located on the platform. Application Four-sensor powder-coated platforms are ideal for industrial applications where precise and reliable measurements of heavy loads are needed. They can be used in warehouses, logistics centres, manufacturing plants, as well as in the food, chemical and pharmaceutical industries. Powder coating provides them with extra protection against harsh working conditions, which increases their service life and reliability. Use the potential Our platforms can work with one of as many as eight weighing terminals: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10, PUE 5.