Olympus BX61 Microscope With BX-UCB And U-HSTR2 Control Units Lab

REALUX BK 5000 trinocular microscope - 5 objectives New equipment in its original packaging Model: B (more)K 5000 Trino Trinocular head Eyepieces: WF 10X-20 mm Eyepiece diameter: 23.2 mm XY stage: Size 175 x 145 mm, Movement 78x55 mm - Object guide for 2 blades 3W LED lighting 5 plan-achromatic IOS objectives corrected to infinity: IOS PL ACH 4×/0.10 W.D. = 12.10 mm IOS PL ACH 10×/0.25 W.D. = 4.64 mm IOS PL ACH 20×/0.40 W.D. = 2.41 mm IOS PL ACH 40×/0.66 W.D. = 0.65 mm IOS PL ACH 100×/1.25 (oil) W.D. = 0.12 mm

Olympus Binocular head 2 Connections (1 on each side) for a multiple viewing station   Special Feat (more)ures: Halogen Illuminator for Transmitted Light. 4-Place objectivepiece. Objective Lenses: 1x Plan Achromatic objective PL 4X/0,10 1x Plan objective PL 10X/0,25 1x Plan objective PL 40X/0,65/S Olympus Transmitted Light Condenser 0.9 General Features: Frame model: Olympus BHSU Stage model: Olympus mechinal XY stage Transmitted Light Filter: 1 slot Multi viewing system Equipped with 2 binocular Olympus heads Eyepieces not included Viewing the resolution is much higher than video System provides image orientation that is identical to the instructor

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requir (more)ements. Included are; 1x Olympus FluoviewModel FV1000 The unit is in good cosmetic condition, but the power cables were missing so it has not been tested. The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed. 1x Olympus Transmitted Light Detector:Model FV10-TDThe unit is in good cosmetic condition. 1x Olympus Control Box:Model IX2 UCBThe unit powers on and is in good cosmetic condition. 1x Olympus Power Supply:Model FV10-PSUThe unit powers on and is in good cosmetic condition. 1x FV10-PSU Key:Model 1201 The unit is in good cosmetic condition. 1x Olympus Hand-switch:Model U-HSTR2The item powers on and is in a reasonable, used cosmetic condition. 1x Olympus Laser Diode Interface Controller:Model FV10-LDIFThe unit is in good cosmetic condition. The PSU is missing. 1x Olympus Power Supply:Model U-RFL-T200Life Time: 3667 hoursThe unit powers on and is in good cosmetic condition. It is not known if the Burner has been replaced after 200 hours. 1x Olympus Mercury Light Source:Model U-LH100GThe unit powers on and is in good cosmetic condition. The Lamp is working. 1x Olympus Light Source StandModel FV10-FIRThe unit is in good cosmetic condition. There are some scuffs and scratches from general use. 1x Olympus Power Supply:Model FV5-LDPSURunning hours: 79335.3 The unit powers on and is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units. 1x FV5-LDPSU Olympus Power Supply Key:Model 1201The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply. 1x Olympus Laser HeadModel LD405The unit is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply. 1x IW-R3000N Rack Mountable Server ChassisThe unit powers on and is in good cosmetic condition. Accessories: 1x Olympus objective correction capModel CAP-G0.5 ± 0.5The unit is in good cosmetic condition 1x Olympus Laser safety shutterModel F10-SHAUXThe unit is in good cosmetic condition. 1x Olympus Goose neck fibre optic light pipesModel LGS3F1200UVThe unit is in good cosmetic condition. Spacers: 2x L3cm xW3cm xH0.5cm 2x L4cm x W4cm x H0.5cm The units are in good cosmetic condition. Misc Accessories: 1x IW-R3000N Rack Mountable Server Chassis User manual V2.11x Microsoft Windows 2000 XP professional Inst/uninst CD1x Belkin Serial Adaptor 1x RCA Phono male to male cable (sealed)1x SATA Cable (C13214-001 FOXCON 0550)1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable 1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor1x RCA Female to mini DIN 8-PIN connector (sealed)1x VGA to DVI connector (sealed) Installation discs:2x Belkin USB Adaptor Installation1x Intel Express installer1x Sapphire installation driver 1x mini disc

Ohaus a-AP50MM-B Photometer Fixed Wavelength 365 nm; 420 nm; 455 nm; 525 nm; 560 nm; 570 nm; 630 nm  (more)Photometric Measuring Range 0 Abs to 1 Abs Wavelength Accuracy ±1.0nm Features - The AP50MM is equipped with a real-time dynamic display for eachmeasurement, to provide fast, reliable results - Can record up to 30,000 datapointswith time and date stamp - Built-in calibration curves provide automatic selection of appropriatewavelengths from the long-lasting LED light source, store commonly used tests for efficiency - Large, backlit display makes it easier to read real-time results - Fixed wavelengths: 365 nm, 420 nm, 455 nm, 525 nm, 560 nm, 570 nm, 630 nm - Turbidity optical system based on nephelometric measurement - Photometric accuracy of ± 0.005 Abs at 1.0 Abs nominal - Compact and lightweight design weighing only 1.32 lb (0.6 kg) - Operates on 4 AA (LR6) batteries with a typical life of 6 months The Ohaus a-AP50MM-B Photometer is a standalone, multifunctional device designed for fast and reliable colorimetric and turbidity measurements in field applications. Engineered with a compact, rugged design, this photometer provides exceptional performance with a real-time dynamic display for each measurement, allowing for precise and efficient analysis. Capable of storing up to 30,000 data points with time and date stamps, it ensures seamless data management for professional use. The a-AP50MM-B features built-in calibration curves that automatically select the optimal wavelength from its advanced LED light source, including near-UV at 365 nm, making it highly versatile for various testing requirements. A large, backlit graphical LCD offers clear visibility of results, even in low-light conditions, while the device’s nephelometric turbidity optical system ensures accurate measurements ranging from 0 to 200 NTU. With its lightweight construction at just 1.32 lbs and operation powered by 4 AA batteries lasting up to six months, the a-AP50MM-B is perfect for on-the-go applications. While this model does not include additional accessories like the a-AP50MM-F, it delivers all the essential features for high-quality analysis, making it a reliable choice for water sample testing in diverse environments. INCLUDED: The Ohaus a-AP50MM-B Photometer includes: - >Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Reason for return - Investigate faults and re-list accordingly: - We received the item with a cracke (more)d glass piece to the photoionization detector. We replaced it with a piece that was provided. - We piped the system with N2 carrier gas and gas lines carrying product to the inlet of the GC. We turned on the switch to the Photoionization detector, under high sensitivity, and can visibly see it turn on. The source is aligned. The detector is aligned.  - We programmed the event on the software to turn the valve of the 10-way valve accordingly to enable the carrier gas to bring the product through the GC. - We introduced acetone via the sample loop (inlet gas) - we saw no peaks. We introduced acetone via injection - we saw no peaks.  - I leaked checked the piping including within the detector - no issues. I checked the point of outlets to make sure flow is continuous too - no issues. - The mechanism of the valve turning - it made a cranky sound, and I am not convinced it is turning the valve.  - There may be two issues. I had figured it was the valve so I tried injecting acetone directly into the line, but we could not see any peak of acetone. (Issues with the detector?) I am not sure if the valve's squeaking/cranky sound implies it is turning but there might be an issue here too. This SRI 8610C GC Gas Chromatograph System was removed from a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. The lab did confirm however, that is in good working order. It is in very good cosmetic condition with only very minor marks from use.

This Perkin Elmer TurboMatrix 40 Headspace Sampler was removed from a university lab where it was su (more)rplus to requirements. The item is in good cosmetic condition and powered up. When powered up, the item ran a sampling method that displayed the motor in good working order, we are unable to test this item further at our facility.

Additional LCD display in plastic housing and on a stand. The display enables presentation of the we (more)ighing result in a place distant from the balance workplace. It features an additional information line which allows to display additional messages and data.

Heidolph 036110220 Hei-PLATE Mix 20L Magnetic Stirrer The Heidolph 036110220 Hei-PLATE Mix 20L Magne (more)tic Stirrer was specially developed for applications with thermolabile substances. Because this model has no heating. The Hei-PLATE Mix 20L is ideal for applications up to 20 liters and can gently stir your solution in a speed range of 100 to 1,400 RPM. In addition, the rotation speed ramps up slowly until it has reached the desired value. This prevents splashes, uneven starts, or jumps of the stirring rod. The patented Kera-Disk® plate made of aluminum with a ceramic coating is chemical-resistant, scratch-resistant and has a diameter of 145 mm. This unique size makes it suitable for use with many accessories and samples on a small footprint. This unit does not have a heating function Click Here to View Product Video INCLUDED: The Heidolph 036110220 Hei-PLATE Mix 20L Magnetic Stirrer includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty