Nikon SMZ 1000 Stereo Microscope Plan Apo 1.0x WD70 C-W10x/22 C-LEDS

This Nikon Microphot-FXA Fluorescence Microscope was removed from a university lab where it was surp (more)lus to requirements. The PSU is missing so we were unable to power up the Microscope. It requires a Nikon PSM-4A. The power supply unit for the mercury lamp is present. The PSU is working but the bulb needs to be replaced. The system is in reasonably good cosmetic condition with marks from use. It has; 2x Nikon FX-350X 35mm film cameras attached via Nikon mounts.1 x SOFT RTS 25.4 2mp slider with data lead. 1 x NIKON 4/0.101 x NIKON FLUOR 20 0.75 160/0.171 x NIKON FLUOR 40 0.85 160/0.11-0.231 x NIKON FLUOR 100 / 1.30 OIL 160/0.172 x CFWN D10 X/20 There is a PC with ISMOL Software & relevant PCI cards for connecting everything.

This Leica TCS SP 2 Confocal Microscope System was removed from a university lab due to a fault. The (more) university reported "Apparently it was a computer issue, in that the computer failed and would no longer talk to the confocal and nothing could be done to remedy the issue since Leica wont support it, I’m told the actual microscope and lasers are fine (if old!)" From our assessment, the microscope appears to be fully working and it could be split from the main system and used on its own. The controllers etc for the automated stage also appeared to work fine. It is just the AOBS head and control system that doesn't want to communicate with the PC. The system has been fully connected up at our facility. We have replaced the PCi card but that did not generate any success either. When starting the Leica PC program it shows the following message: "AOBS Crystal Ctrl (2)" reports 0 unlocked PLL channel(s)! Please lock channel(s) or reset controller. The AOBS is the scanner head which is attached to the main control desk. We have also tried the system with another identical head that we have in stock. That gave us exactly the same result. It is sold for spares/repairs. Please note that the marble table in the photos was retained by the lab.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Motic SMZ-160-TLED Stereo Zoom Microscope with LED Illumination Max Magnification 45x Warranty 5 Yea (more)rs Illumination LED Variable Light Control Features - ESD and non ESD version - New lead-free optical design - Greenough optic system - Compact and rugged - Light weight - Anti fungual treatment on the base - Interlock eyepieces tube - LED stand - 3W LED Transmitted Illumination - 3W LED Incident Illumination - Switching power supply for use worldwide (100-240V) - No bulb change, lamp life up to 25,000 hrs. - Outstanding price-performance ratio INCLUDED: The Motic SMZ-160-TLED Stereo Zoom Microscope with LED Illumination includes: - 10X Eye Piece - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic PA43 BIO PH Trinocular Upright Biomedical Microscope Objectives Plan UC 4X, 100X & Plan UC (more) PH 10X and 40X Optical System Scalable Infinity-Corrected(CCIS) Illumination Köhler Halogen 30W and LED 3W Module Features - Kohler illumination with option of Halogen or LED illumination - An automatic power-saving mode is engaged whenever an operator leaves temporarily. - Consistent, even Illumination with IL Function to ensure high quality imaging. - The rackless stage of the PA43 offers smooth movement of the stage with zero-backlash. - Meets a wide variety of application needs including pathology, cytogenetics, hemataology, and toxicology. - Specially designed non-cover glassed objectives are available separately as part of the PA43’s accessory lineup. The PA43 BIOMED is a new series from Motic Scientific, and represents a large step forward in combining modularity with ergonomics to improve application imaging workflows. A progression into routine work, this new microscope’s robust design and solid footprint does not compromise on optical quality and features. Its modularity offers flexibility when choosing a configuration that suits multiple end-user applications--from cost-effective solutions, to high-quality optical systems for lab diagnostics. The microscope is not only modular but also flexible in design, and can be upgraded at any time. INCLUDED: The Motic PA43 BIO PH Trinocular Upright Biomedical Microscope includes: - Plan UC 4X, 100X Objectives - Plan UC PH 10X and 40X Objectives - Wide-field eyepiece 10X/22mm - Rackless Stage - Kohler Illumination 30W - LED 3W Module - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Gerhardt Soxtherm S306A SE-3A Extraction System + SE-VA Variostat This system was removed from a uni (more)versity lab where it was surplus to requirements. The unit powers on through the controller, but the controller does not seem to control the main unit. It is in fair condition,with visible signs of age. The springs are rusted, but all glass components and coils are in good condition. Due to the working and cosmetic condition, this system is listed as Spares/Repair. Specifications:- Gerhardt Variostat Controller - Model: SE-VA - S/N: 4012129 - Gerhardt Soxtherm Extractor - Model: S306A SE-3A - S/N: 4012160

Waters Micromass EMD 1000 Lab This item was removed from a university where it was surplus to requir (more)ement. It is in good cosmetic condition but does not power on, therefore it is listed as Spares/Repair.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).