Nikon SMZ-10 Trinocular Stero Zoom Microscope Stereomikroskop 2x S10x

NIKON SMZ-2T stereomicroscope Zoom 1X to 6.3X Nikon 10X/21 eyepieces With camera slot - trinocular P (more)lease note, delivered without light source, see photos

Nikon SMZ645 Stereo Microscope This was removed from a university lab where it was surplus to requir (more)ements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Microscope Head: Nikon 1051163Microscope Stand: (Model:C-PS #:1036837)Eye Piece: 2x (Model :C-W10xA/22)

This Zeiss Microscope Multi Observation Bridge Left and Right with Pointer was removed from a univer (more)sity lab where it was surplus to requirements. This item is in very good cosmetic condition. This item is untested and the PSU is not included.

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requir (more)ements. Included are; 1x Olympus FluoviewModel FV1000 The unit is in good cosmetic condition, but the power cables were missing so it has not been tested. The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed. 1x Olympus Transmitted Light Detector:Model FV10-TDThe unit is in good cosmetic condition. 1x Olympus Control Box:Model IX2 UCBThe unit powers on and is in good cosmetic condition. 1x Olympus Power Supply:Model FV10-PSUThe unit powers on and is in good cosmetic condition. 1x FV10-PSU Key:Model 1201 The unit is in good cosmetic condition. 1x Olympus Hand-switch:Model U-HSTR2The item powers on and is in a reasonable, used cosmetic condition. 1x Olympus Laser Diode Interface Controller:Model FV10-LDIFThe unit is in good cosmetic condition. The PSU is missing. 1x Olympus Power Supply:Model U-RFL-T200Life Time: 3667 hoursThe unit powers on and is in good cosmetic condition. It is not known if the Burner has been replaced after 200 hours. 1x Olympus Mercury Light Source:Model U-LH100GThe unit powers on and is in good cosmetic condition. The Lamp is working. 1x Olympus Light Source StandModel FV10-FIRThe unit is in good cosmetic condition. There are some scuffs and scratches from general use. 1x Olympus Power Supply:Model FV5-LDPSURunning hours: 79335.3 The unit powers on and is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units. 1x FV5-LDPSU Olympus Power Supply Key:Model 1201The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply. 1x Olympus Laser HeadModel LD405The unit is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply. 1x IW-R3000N Rack Mountable Server ChassisThe unit powers on and is in good cosmetic condition. Accessories: 1x Olympus objective correction capModel CAP-G0.5 ± 0.5The unit is in good cosmetic condition 1x Olympus Laser safety shutterModel F10-SHAUXThe unit is in good cosmetic condition. 1x Olympus Goose neck fibre optic light pipesModel LGS3F1200UVThe unit is in good cosmetic condition. Spacers: 2x L3cm xW3cm xH0.5cm 2x L4cm x W4cm x H0.5cm The units are in good cosmetic condition. Misc Accessories: 1x IW-R3000N Rack Mountable Server Chassis User manual V2.11x Microsoft Windows 2000 XP professional Inst/uninst CD1x Belkin Serial Adaptor 1x RCA Phono male to male cable (sealed)1x SATA Cable (C13214-001 FOXCON 0550)1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable 1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor1x RCA Female to mini DIN 8-PIN connector (sealed)1x VGA to DVI connector (sealed) Installation discs:2x Belkin USB Adaptor Installation1x Intel Express installer1x Sapphire installation driver 1x mini disc

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Motic SMZ-171-TLED Stereo Trinocular Microscope with LED Illumination Magnifaction Range 7.5x - 50x (more) Standard Working Distance 110mm Optical System Greenough Features - Stereo microscope - Trinocular head - Greenough optical system - 7.5x - 50x standard magnification - 110mm standard working distance - Pole stand with large working area - Incident illumination - 3w LED - Transmitted illumination - 3w LED - Wide variety of options The Motic SMZ-171-TLED is a stereo microscope, featuring high quality Greenough optics. Designed for versatility, the SMZ-171-TLED can be used in a variety of fields, from medical applications to industrial quality control. This rugged microscope is built to provide clear and distortion free images through many years of daily use. In its standard configuration, the SMZ-171-TLED has a working distance of 110mm, providing ample room for dissection instruments and sample manipulation. Working distance refers to the amount of space between the unit’s base and the unit’s objective, and is an important feature of any stereo microscope – the larger this number, the more room users have to operate. Magnification is controlled by a zoom knob on the microscope’s side, enabling users to adjust between 7.5x and 50x in one continuous motion. The zoom knob also contains five indents, so that precise magnifications can be quickly and accurately repeated. This is especially important when taking measurements with micrometers, reticules, and processing software. Motic also offers a wide variety of optional objectives and eyepieces, greatly expanding the magnification range from 2.25x to 200x. The SMZ-171-TLED is presented in a modular format and can be easily modified by the user. A large number of optional illumination sources, stands and filters are available, enabling users to customize the scope to suit their specific application. It is also available in both binocular and trinocular formats. Digital documentation of your work is made simple with any of Motic’s digital microscopy cameras – the Moticam. With over 20 models to choose from, these range from standard resolution, to research grade instruments with integrated cooling devices.INCLUDED: The Motic SMZ-171-TLED Stereo Trinocular Microscope with LED Illumination includes: - 10x Eye Piece - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Angular rotor for centrifuge Nr.12156 SIGMA 16500 rpm For 8x 50 mL With lid

Laboratory refrigerated incubator with multiparametric microprocessor. Fine temperature regulation,  (more)clear and complete display, top safety class, front regulation of the rear flue. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     2 shelves     Rear flue 45 mm for smoke outlet with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The stove has an independent electronic safety system. The electronic circuit DOES NOT depend on the thermoregulation card and will work even if the main card defaults. ICT-A FALC laboratory incubator

The Biostat B-DCU is a fermenter/bioreactor specifically designed to accommodate the requirements of (more) process optimization and characterization in the biotech and biopharmaceutical industry. It provides enhanced functionality and an unrivalled level of options for cell culture and microbial processes making it the ideal scale-down model for your large scale process. Supply Tower

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

Ohaus ION-100A Static Ionizer Ion Generation Method DC Corona Discharge Ionic Concentration >1x1 (more)06 EA/cm3 (10cm distance) Static Elimination Time 1s / 10 cm; 5s / 20cm Features - Neutralizes electrostatic charges to increase the accuracy of lab measurements - Fan-free DC Corona Discharge technology eliminates static without disturbing samples - Effective static removal range of 10 to 40 cm from the ionizer - Adjustable design for optimal alignment with OHAUS balances - Durable tungsten electrode probes with a lifespan of 15,000 hours - Compact and space-saving footprint, ideal for laboratory environments - Rapid static elimination time: approximately 1 second at 10 cm, 5 seconds at 20 cm The ION-100A Ionizer is a compact, versatile device designed to enhance the accuracy of lab measurements by neutralizing electrostatic charges that can interfere with weighing results. It is particularly effective in low-humidity environments where static can cause significant errors, especially when weighing fine powders or small samples. Utilizing fan-free DC Corona Discharge technology, the ION-100A generates positive and negative ions to eliminate up to 99% of static charges without disturbing delicate samples. This ionizer is adjustable for optimal alignment with OHAUS balances, features durable electrodes with a long lifespan of 15,000 hours, and offers a wide effective range of 10 to 40 cm, making it an essential tool for precise laboratory work. Click Here to View Product Video INCLUDED: The Ohaus ION-100A Static Ionizer includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW