Motic SFC11C-2L Binocular Stereo microscope

Carl Zeiss Axioskop El Einsatz Fluorescence Microscope Lab This microscope was removed from a univer (more)sity lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. It was tested with an objective from another system. The unit does not include any objectives or power supply. Included are;Pl 10x/20 Eyepiece x 2 Serial#: 44 40 32

Leica DM2500 Confocal Microscope System w/ Application Suite X Software Lab This system was removed  (more)from a laboratory where it was surplus to requirements. The client has stated the following: "The systems are fully working and Leica still offer user support for the systems if the new owners so wish. "The system is in good cosmetic condition. All units power up and communicate through the included Leica Application Suite X software.However, there is no camera included, so microscope images cannot currently be viewed via the PC. The system consists of: - 1 x Leica DM2500 microscope - Fitted with: - 1 x Leica 1531144511 Stage - 1 x Leica 11504058 Lamp - 1 x Leica 15-6504-202 Light Supply - 1 x Leica 1531323 Mirror Junction Box - 2 x Leica 507802 HC PLAN 10x/20 Eyepieces - 1 x Leica 507902 ACS APO 10x/0.30 CS Objective - 1 x Leica 507900 ACS APO 63x/1.30 OIL CS Objective - 1 x Leica EL6000 BZ02 with Lightpipe (LCD screen may be faulty, lamp timer not functional) - 1 x Leica TCS SPE Laser Head with Leica Supply Unit RGBV - 1 x Life Imaging Services 'the box' environmental chamber (with 2 x hoses) - 1 x Speirs Robertson Isolation Plate (75cm x 90cm x 5.5cm) - 1 x HP Z420 PC with 2 x Monitors, Keyboard & Mouse (running Leica Application Suite X 3.1.2.16221) - Includes Leica TCS SPE to SPE II USB licence stick

Zeiss Axio Vert.A1 FL Inverted Microscope This system was removed from a university lab where it was (more) surplus to requirements. The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted. The instrument is configured as follows: - 1 x Microscope stand Axio Vert.A1 FL (431030-9010-000) - Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination - Reflector modules: DAPI, FITC, TRITC, empty - 1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000) - Position 1: empty - Position 2: 424228-9060 0.05T Neutral density filter 0.05 - Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55 - Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55 - Position 5: empty - 1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000) - 1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000) - 1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23 - 1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000) - 1 x Camera adapter 60N-C 2/3" 0.5x (426112) - 1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00) - 1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000) - Object guide M, 130x85mm, for Axio Vert (432333-9040-000) - 1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

This item has just arrived in our stock. Please enquire for further details.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Motic PA53 FS6 EDF Trinocular Upright Biomedical Microscope w/ LUMOS Fluorescence LED Objectives UC  (more)Flour 4X, 10X, 20X, 40X, 100X Optical System Colour Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Upright with auto EDF focusing and motorized Z-axis (30mm stroke). - Equipped with a 6-channel turret and high-powered LUMOS LED for superior fluorescence illumination. - Delivers high color fidelity and resolution with a 23mm FOV. - Utilizes Colour Corrected Infinity Optical System (CCIS®) for superior clarity and color fidelity. - Features Plan UC Fluor objectives for ultra-flat, high-contrast imaging, ideal for UV-Visible fluorescence. - Includes two empty filter cubes for customizable application needs. - Allows precise focus adjustment for both eyepieces. - 4X to 100X, accommodating various magnification needs. - LUMOS FL LED provides over 20,000 hours of operation. The Motic PA53 FS6 EDF is a high-end fluorescence life-sciences trinocular microscope equipped with a 6-channel fluorescence turret, featuring pre-mounted DAPI, FITC, and TRITC filter cubes, plus two user-configurable empty filter cubes. Its superior optics deliver high color fidelity and resolution, with a 23mm field of view. The PA53 FS6 EDF boasts a reflective fluorescence illumination system with a powerful LUMOS LED and a transmitted 100W Halogen light source. INCLUDED: The Motic PA53 FS6 EDF Trinocular Upright Biomedical Microscope w/ LUMOS Fluorescence LED includes: - UC Flour 4X, 10X, 20X, 40X< 100X Objectives - Motic Fluorescence Imaging Software Plug-In - Wide-field eyepiece 10X/23mm - Motic Images Plus 3.0 Software - Kohler Collector, N.A 0.9/1.25 - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

This Panasonic CO2 Laboratory Incubator Model - MCO-18AC-PE was removed from a university lab w (more)here it was surplus to requirements. The unit has been professionally serviced. It is in good working order. It will require calibration on installation. It is in good cosmetic condition and is clean inside. Internal dimensions - L51 x W48 x H67cm2 Shelves - 46 x 45cm

This listing is for an Eppendorf 5415D Centrifuge The Centrifuge 5415 D is a non-refrigerated bench (more)-top centrifuge and is used in research and routine laboratories in the biosciences, industry, clinics and chemistry.With their space-saving design and user-friendly operating concept, these centrifuges are ideal for everyday routine tasks.The basic functions can be selected using the "SHORT" key and the "TIME" and "SPEED" dial. The values appear in the display in digital form.Power supply: 230 V / 50 – 60 Hz 120 V / 50 – 60 Hz see identification plate Power requirement: 180 W Max. rotational speed: 13,200 rpm Max. centrifugal force: 16,110 rcf Max. load: 24 x 2.0 ml Safe-Lock Micro Test Tubes or 36 x 0.5 ml tubes Max. kinetic energy: 3,100 Nm Max. density of material to be centrifuged: 1.2 g/ml Ambient temperature: 2 °C – 35 °C Max. relative humidity: 75 % Dimensions: Height:230 mm Depth: 310 mm Width: 230 mm Weight (without rotor): 8.5 kg Acceleration time (230 V): < 13 sec. Deceleration time: < 11 sec. Acceleration time (100 / 120 V): < 15 sec. Deceleration time: < 13 sec.

PS.R2 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. Communication interfaces New PS.R2 balances, like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm balances with a smaller pan have a draft shield. The balance precision and the measurement accuracy is assured by automatic internal adjustment, which takes into consideration temperature changes and time flow. PS.R2 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website &ndash; SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard. Database - a direct access to databasis Function - a direct access to the basic functions F1 do F4 - programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Ohaus PX4202 Pioneer Precision Balance, 4200 g, 0.01 g Maximum Capacity 4,200 g Readability 0.01 g R (more)epeatability (Typical) 0.01 g Features - Maximum capacity of 4,200 g with a readability of 0.01 g - Stainless steel weighing pan with an 180mm diameter for durability - InCal™ semi-automatic internal calibration for maintaining accuracy - Backlit 2-line LCD display with additional information or guidance on the second line - 1-second stabilization time for quick and reliable measurements - Durable construction with a cast metal lower housing and plastic top housing - USB and RS-232 connectivity for easy data communication - Static removal bar for convenient grounding and reducing static interference - Integrated weigh-below-hook for specialized weighing applications The Pioneer PX combines essential weighing functionality with competitive performance, offering high accuracy and repeatability for applications in laboratory, industrial and education settings. The PX is affordably priced, intuitively designed for intelligent operation with a second line display for additional information, and USB and RS-232 connectivity for easy communication. Click Here to View Product Video INCLUDED: The Ohaus PX4202 Pioneer Precision Balance, 4200 g, 0.01 g includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

SCILOGEX SCI380HS-Pro LCD Digital 5.5 x 5.5 in. Magnetic Hotplate Stirrer, ceramic plate, with PT100 (more)0 Sensor &amp; Sensor StandThe new SCI380HS-Pro hotplate-stirrer is a very economically priced LCD digital hotplate-stirrer ideal for temperatures below 380°C. This compact unit can be used as a hotplate, stirrer or combination. SCILOGEX 380°C magnetic hotplate stirrers include all leading safety standards and is chemically resistant with white ceramic work plate. They can be used in physical, chemical, analytical and biological laboratories. Product Features - Heat only, stir only or heat and stir together functions. - Digital temperature control with max. temperature at 380°C - Digital speed control with max. speed up to 1500rpm - High resolution LCD displays actual temperature and speed. - Brushless DC motor is maintenance free. - Ceramic plate for chemical resistance and easy clean - Aluminum cover with ceramic work plate, allows for immediate heat transfer. - Electronic speed control for constant speed even during changes in load - External temperature control is possible with temperature sensor PT1000. - Hot warning sign if temperature is above 50°C. Click Here to View Product Video INCLUDED: The SCILOGEX SCI380HS-Pro LCD Digital 5.5 x 5.5 in. Magnetic Hotplate Stirrer, ceramic plate, with PT1000 Sensor &amp; Sensor Stand includes: - PT1000 Sensor &amp; Sensor Stand - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty