Monoculair microscope

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Leica S 6D Stereo Microscope 6.3x - 40x with Leica L2 Lightbox and Schott KL 1500 Electronic This sy (more)stem was removed from a university lab where it was surplus to requirements. The Leica S 6D stereo microscope is in good condition with minor wear. The Leica L2 lightbox is missing its power lead, while the Schott KL 1500 light source is in good condition and fully operational. The system comprises the following: - Leica S 6D Stereo Microscope - Model: S 6D - Serial No.: N/A - Leica L2 Lightbox - Model: L2 - Art No.: 10 446385 - Serial No.: N/A - Schott KL 1500 Electronic - Model: KL 1500 - Serial No.: N/A

Applied Imaging Genetix Ariol SL-50 Vision BioSystems Olympus BX-61 Microscope This was removed fro (more)m a university lab where it was surplus to requirements. The item is in a fairly good used cosmetic condition. It appears to have some errors. Firstly the BX-UCB controller is showing an Error with CDT, which is the U-UCD8A turret. When switched on the turret makes a horrible noise, sounds like the motor is possibly stuck. We managed to clear the error by connecting the turret from another BX61 we have in stock, but it was removed after testing. System includes the following:- Vision BioSysytemsModel - SL50SN - 0220229Powers on Microscope & Fitted Parts:-Olympus BX61 MicroscopeModel - BX61TRFSN - 8K25329 Olympus CameraModel - U-CMAD3U-TV1X-2 Prior StageModel - H101AIBXSN - 70177 Olympus LampModel - U-LH100-3SN - 8H23231 EXFO Collimating Adaptor810-00032SN - DH0583 2 x Olympus Eye Pieces - WHN10X-H/22 Olympus Objectives:-UPlanFL N 10x/0.30 ∞/-/FN26.5MPlanFL N 5x/0.15 ∞/-/FN26.5UPlanFL N 60x/0.90 ∞/0.11-0.23/FN26.5UPlanFL N 20x/0.50 ∞/0.17/FN26.5UPlanFL N 40x/0.75 ∞/0.17/FN26.5PlanApo N 1.25x/0.04 ∞/-/FN26.5 Other Units:-Olympus Microscope ControllerModel - BX-UCBSN - 8E14044Powers on Olympus Hand SwitchModel - U-HSTR2SN - 8K22255 EXFO X-Cite Series 120PC Q Light SourceModel - XI120PC-QSN - XI120PC-Q-0283Powers on Prior Proscan IIModel - H30XYZ2APSN - 08439Powers on USB Joystick Controller (No Brand or Serial numbers) PC Parts/Software:-HP Applied Imaging PCHP 24" MonitorHP KeyboardDell MouseApplied Imaging Ariol 3.3 CD with Installation InstructionsUSB DongleAriol 3.4 Official Release Copied Disc2 x Panasonic DVD-RAM Back up DiscsBox of various PC cables & IEC leadsDatalogic Gryphon Barcode Scanner & 2 Rolls of Barcodes Manuals/Guides:-Genetix Ariol User Manual - Scan, Entry, ReviewGenetix Ariol SL-50 InstallationX-Cite Series 120PC Q User GuideOlympus BX-UCB U-HSTR2 InstructionsOlympus Motorized Reflected Fluorescence System InstructionsOlympus BX61 InstructionsOlympus Camera Adaptor System InstructionsOlympus Motorized Revolving Nosepiece Instructions Other Parts/Accessories:-Applied Imaging Calibration Slide A3 x Chroma Cases of filtersNikon BE Plan 100x /1.25 Oil ∞/0.17 WD0.14 Objective5 x Spare Slide Trays

Motic Panthera C2 Trinocular Compound Microscope Your Personal Lab Solution If it is about stained s (more)ections with cover glass protection, about native smears, fine needle biopsies, blood smears that wanted to be treated with or without cover glass: Panthera C2 with its selection of specified optics is your solution. The new Ultra Contrast (UC) objectives with additional glass elements to reach a 22mm Field of View, working perfectly together with neutral eyepieces (thanks to CCIS a fully corrected intermediate image for digital access is granted) guarantee the best performance in terms of color fidelity and contrast. Microscope hardware, illumination, handling: Simply convincing. Functionality is Always Related to the Sample Bright Field is the standard, Phase Contrast, Pol Contrast, objectives with/without cover glass correction, optional LED Fluorescence modules with variable filter combinations: Within Panthera C2 module kit everything is possible for your lab, for your application. The microscope hardware suits to almost any physics of the user, no need to talk about interpupillary distance, viewing angle, or seating position. New UC Optics for New Insights No doubt. The new Plan UC Achromatic objectives, from 2X to 100X magnification range, show significantly improved image contrast. For your individual application: The new 100X/0.8 "Dry objective" is especially favorable in environments where the time-consuming immersion procedure may be considered too complicated. Test it, you are easily convinced. A Field of View of 22mm indicates one more step closer to the High-End level of overview: Your horizon will be enlarged. Flexibility in Illumination The Panthera C2 offers flexibility in light sources. A 30W Halogen bulb can be replaced by a 3W LED of different color temperatures. A Full-Koehler setup for transmitted light is self-evident. Seamless Integration into your Workflow For maximum use of accessories, the Panthera C2 is deeply integrated into Motic's Upright microscope system. The universal turret condenser with all Phase rings and a Darkfield stop, the combination of Polarizer/Analyzer for birefringent samples, LED Fluorescence modules for Epi-Fluorescence: design your workplace according to your demands. We will help you. Click Here to View Product Video INCLUDED: The Motic Panthera C2 Trinocular Compound Microscope includes: - Widefield UC-WF10x/20 Eye Piece - 4X/0.10 (WD 30.5mm) Objective - 10X/0.25 (WD 17.4mm) Objective - 40X/0.65/S (WD 0.6mm) Objective - 100X/1.25/S-Oil (WD 0.16mm) Objective - Dust Cover - Power Cord - Allen Key - Immersion Oil (5ml) - Blue Filter - Halogen Bulb - LED Module - 5 Year Manufacturer's Warranty

Heating thermostat from 20 to 100°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - Transparent polycarbonate bath up to 100°C - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Graph of heating performance of ECO Silver immersion thermostats with polycarbonate bath. Performance graph of the pump pressing on the six levels.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for 1 of 4 Eisai MIH-DX Inspection Hood. The unit is in full working condition and  (more)is ready for immediate release. Elevate your quality control processes with the Eisai MIH-DX Inspection Hood, a premier standalone workstation designed specifically for the meticulous inspection of liquid-filled vials and ampoules. Ideal for clinical laboratories and the re-inspection of rejects from automated machines, this inspection hood ensures high-quality results in pharmaceutical applications. Key Features: Robust Construction: The MIH-DX features durable stainless steel construction, ensuring longevity and reliability in various laboratory environments. Optimized Lighting: Equipped with non-glare black and white backgrounds and two flicker-free fluorescent ballasts, this hood provides optimal lighting conditions for accurate particulate inspection. Versatile Application: Perfect for small volume and sensitive product production runs, the MIH-DX is also an excellent validation tool for other in-line semi-automatic inspection systems. Technical Specifications: Configuration: Standalone workstation Material: Stainless steel Lighting: Two flicker-free fluorescent ballasts Backgrounds: Non-glare black and white for enhanced visibility Benefits: High-Quality Inspection Results: Ensures precise detection of particulate matter and cosmetic defects, crucial for maintaining product integrity. Flexibility and Portability: The MIH-DX allows for easy integration into your existing workflow, providing a reliable inspection solution without the need for complex setups. Ideal for Various Applications: Whether used in clinical settings or during the re-work of rejects, this inspection hood adapts to your specific needs, enhancing operational efficiency. The Eisai MIH-DX Inspection Hood is the perfect choice for laboratories seeking a dependable and effective solution for inspecting pharmaceutical products. Invest in quality assurance and elevate your inspection processes today!

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

Benchmark DC4020 DryChill Ice-Free Cooling Block, 40 x 1.5/2.0ml Temperature Holds 4°C for up to 230 (more) Minutes Capacity 40 x 1.5/2.0ml Warranty 2 Year Manufacturer's Features - Ice-free, stable cooling for sample tubes - Unique design reduces condensation - Maintains 4°C for up to 200+ minutes - 4 sizes for various tubes up to 50ml - Visual temperature indicator - 2 Year Manufacturer's Warranty