Leitz Micromanipulator Micro-Manipulator Lab

Leitz MicroManipulator Lab This item was removed from a university where it was surplus to requireme (more)nt. The unit is in good mechanical working order and good cosmetic condition, we are unable to test it further at our facility.

This Digital Instruments Signal Access Module lll was removed from a university lab where it was sur (more)plus to requirements. The lab confirmed the unit was working when last used, but it has not been tested at our facility. It is in reasonably good cosmetic condition but has some marks from use. System comprises; 6 x pairs low voltage inputs to the nanoscope controller (data signal)12 x pairs low voltage inputs from the nanoscope controller (control signals)6 x pairs of high voltage outputs from the nanoscope controller (piezo drive signals)6 x pairs of inputs to the sensor4 x pairs outputs from the sensor2 x ports to microscope controller1 x port to microscope1 x port to sensor

Euromex iScope IS.1153-PLPHi phase contrast trinocular microscope. Eyepieces EWF10x/22 mm Objectives (more) corrected to infinity (IOS) DIN flat phase Plan PLPH10x/0.25, PLPH20x/0.40, PLPHS40x/0.65 and PLPHS100x/1.25 oil-immersion. Treatment mold. Capacitor-adjustable height, turret positions (bright-field, dark-field (up to 400x magnification), phase 10x/20x, phase 40x, phase 100x) with iris diaphragm. Lighting NeoLED 3W. Feeder internal 85V-240V. Auto power off Sensor iCare Supplied with a protective case, fuse replacement, special tools, small bottle of immersion oil 5ml, power cord, filter, white frosted, green filter, manual of instructions in Spanish. Certificate of origin the Netherlands

Buchi F-105 recirculation chiller. Optimally designed for use with a rotary evaporator. Temperature  (more)range from -10ºC to 25ºC. Accuracy ±1 °C. Flow rate 2.5 L/min. Tank 3 L. Digital, resolution 0.1 °C. Dimensions: 280*500*420mm. Weight 30kg. 8 mm tubing connection. User manual. The Buchi F-105 recirculating chiller is designed for one rotary evaporator with a cooling capacity of 400 W at 10 °C. It is equipped with a display which enables the connection to a vacuum controller V-850 or V-855 showing the set and actual temperature.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).

Julabo CORIO CD-310F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz Refrigera (more)nt R449A Working Temperature Range -30°C - 150°C Cooling Capacity 310W (at 20°C) Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 CORIO™ CD-310F refrigerated/heating circulator with an operating range of -30…+150 °C and ±0.03 °C stability. Suitable for temperature applications with cirulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CD circulator incorporates easy change-over for control of fluid circulation internally or externally. The CORIO CD includes USB-B port for PC communication and a USB-A port for datalogging. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 310W cooling power at 20 °C with 30W cooling at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo CORIO CD-310F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz includes: - 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) - Power Cord - Two Year Manufacturer's Warranty

Heating block for 1.5/2.0 ml tubes at fixed temperatures of 60°C and 95°C.