Leica MZFLIII Fluorescence Stereomicroscope with LEJ EBQ 100 PSU Lab

Motic AE21 Series Trinocular Inverted Microscope with 3x Objectives This was removed from a working  (more)lab where it was surplus to requirements. The unit has been tested and is in good working order. It is in very good cosmetic condition with minor marks It is fitted with the following; 1x N.A. 0.30 condenser (WD 72mm) with halogen illumination 6v/30w. 1x Centerable PH slider supplied with phase ring PH 1 2 x Eyepieces - W10x/20 3 x Objectives: 1x Motic E Plan LWD PH 20x/0.40 ∞/1.1 WD 5.51x Motic E Plan PH 10x/0.25 ∞/1.1 WD 6.31x Motic E Plan 4x/0.10 ∞/1.1 WD 14.2

The Büchi B-480 Water Bath is intended for use with a rotary evaporator. It heats up quickly in a te (more)mperature range from ambient +5°C to 100°C, with an accuracy of ± 2°C. It has a capacity of 5 L. It is simple but efficient in performance. Housing dimensions (WDH): 32*23*31cm; bath dimensions (ø*H): 28*12 cm. User manual.

Motic Panthera C2 Trinocular Compound Microscope Your Personal Lab Solution If it is about stained s (more)ections with cover glass protection, about native smears, fine needle biopsies, blood smears that wanted to be treated with or without cover glass: Panthera C2 with its selection of specified optics is your solution. The new Ultra Contrast (UC) objectives with additional glass elements to reach a 22mm Field of View, working perfectly together with neutral eyepieces (thanks to CCIS a fully corrected intermediate image for digital access is granted) guarantee the best performance in terms of color fidelity and contrast. Microscope hardware, illumination, handling: Simply convincing. Functionality is Always Related to the Sample Bright Field is the standard, Phase Contrast, Pol Contrast, objectives with/without cover glass correction, optional LED Fluorescence modules with variable filter combinations: Within Panthera C2 module kit everything is possible for your lab, for your application. The microscope hardware suits to almost any physics of the user, no need to talk about interpupillary distance, viewing angle, or seating position. New UC Optics for New Insights No doubt. The new Plan UC Achromatic objectives, from 2X to 100X magnification range, show significantly improved image contrast. For your individual application: The new 100X/0.8 "Dry objective" is especially favorable in environments where the time-consuming immersion procedure may be considered too complicated. Test it, you are easily convinced. A Field of View of 22mm indicates one more step closer to the High-End level of overview: Your horizon will be enlarged. Flexibility in Illumination The Panthera C2 offers flexibility in light sources. A 30W Halogen bulb can be replaced by a 3W LED of different color temperatures. A Full-Koehler setup for transmitted light is self-evident. Seamless Integration into your Workflow For maximum use of accessories, the Panthera C2 is deeply integrated into Motic's Upright microscope system. The universal turret condenser with all Phase rings and a Darkfield stop, the combination of Polarizer/Analyzer for birefringent samples, LED Fluorescence modules for Epi-Fluorescence: design your workplace according to your demands. We will help you. Click Here to View Product Video INCLUDED: The Motic Panthera C2 Trinocular Compound Microscope includes: - Widefield UC-WF10x/20 Eye Piece - 4X/0.10 (WD 30.5mm) Objective - 10X/0.25 (WD 17.4mm) Objective - 40X/0.65/S (WD 0.6mm) Objective - 100X/1.25/S-Oil (WD 0.16mm) Objective - Dust Cover - Power Cord - Allen Key - Immersion Oil (5ml) - Blue Filter - Halogen Bulb - LED Module - 5 Year Manufacturer's Warranty

Motic AE2000MET Trinocular Inverted Industrial Microscope, 50W Illumination Objectives Optional Opt (more)ical System Colour Corrected Infinity Optical System (CCIS) Illumination Kohler Quartz Halogen 12V/50W Features - Robust manufacturing quality for a long lifetime - New BF/DF objectives for metallurgy (sold separately) - Sufficient power resources - A flexible upgrade for digital results The Motic AE2000MET Trinocular Inverted Industrial Microscope, 50W Illumination is an Inverted Metallurgical microscope designed to inspect polished cross-sections as well as larger, bulky samples within industries such as automotive, machinery, and metal fabrication. Large metal or die cast parts, too large to view under a conventional upright microscope, can easily be examined for failure analysis, material research or quality control. INCLUDED: The Motic AE2000MET Trinocular Inverted Industrial Microscope, 50W Illumination includes: - Widefield N-WF10X/20mm Eyepieces - Dust Cover - Allen Key - Blue Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The uScopeMXII digital microscope produces high-quality images while allowing you to scan a region o (more)f interest. This digital workhorse offers unprecedented capability in a form factor ideal for desktop PC users. A little larger than an external hard drive, the uScopeMXII delivers high-resolution digital images from standard glass slides. Illumination: LED (White) Camera Resolution: 960×540 Field Image Format: JPEG, PNG (lossless) Scanned Image Capture: Single Field, Tiled Fields, Overlapped Fields, Underlapped Fields Viewing Formats: Single Field, Tiled Fields, Deep Zoom Image Export Formats: JPG, BMP, PNG, TIFF

Defender 6000 advanced IP68/IP69k washable bench scale Versatile, precise and extremely resistant. S (more)uitable for extreme humid environments, the new Defender® 6000 bench scale has been designed to offer an IP69K degree of protection and meet the hygienic demands of the chemical and food industries. For years, operators in the food, chemical and pharmaceutical industries have chosen Defender bench scales from OHAUS for their exceptional reliability, accuracy and versatility. - Resistant to intensive washdowns in processing and packaging environments: IP68/IP69K, - NSF certified and supports HACCP systems with a 316 stainless steel base: Corrosion protection in food and chemical processing and packaging. - Large display and different application modes - Connectivity: GLP/GMP data output with real-time clock Control panel DT61PW, for Defender 6000 Hybrid Easy to use thanks to its five buttons and its large and bright LCD screen. They offer an optional infrared communication kit to connect without opening the housing. The indicator is capable of storing up to 1,000 weighing results which can be transferred to a PC or system for traceability. PW models can run on standard D-cell batteries for up to 1,600 hours. D61XWE control panel, for Defender 6000 in stainless steel. Bar matrix display, cut resistant keyboard with dedicated keys for quick product changes and touchless sensor. They offer several connectivity options, including standard RS232 and integrated USB host. Optional: RS232/RS485/USB, analog output, Wi-Fi/Bluetooth, Ethernet and discrete I/O with relay. XWE models run on standard mains power, and optional external USB power bank support is available (up to 55 hours with 20,000mAh power bank). Models without column, Defender 6000 Front Mount Models without column, only with the DT61PW control panel, are also available for the Defender 6000 Hybrid. APPLICATIONS Weighing: Determine the weight of items in the selected unit of measure. Parts Counting: Count items of uniform weight. Advanced auto-optimization software recalculates the average piece weight as the overall weight increases. Checkweighing/ Checkcounting: Compare the weight of an item against target limits. Compare the count of a package against target limits. Bar matrix or 3-color check light display give clear and bright indication of weight. Percent Weighing: Display the weight of an item as a percentage of a pre-established reference weight. Dynamic Weighing and Display Hold: Take an average of weights for an item over a period of time to account for vibration or other interference. The Display Hold feature manually or automatically holds the last stable weight of an item on the display. Available only in the i-D61XWE models: Filling: Fill a container to a target weight. 3-color bar matrix displays filling status. Connect with Discrete I/O option kit for an auto-filling system. Library and User Management: Up to 300 library items (stores part number, tare weights, APWs, under/over limits, set points or reference weight) can be shared within different weighing modes. Up to 100 user IDs can be stored for secure user access and traceability Resistance and practicality The Defender 6000 scale features a 316 stainless steel platform and frame, and an advanced wet-weather indicator with IP68/IP69K rating and hermetically sealed load cell, as well as a cut-resistant front panel. Plus, NSF Certified and USDA-AMS Approved; supports HACCP systems, for environments related to food safety. The scale can withstand any mishap, from food splashes to chemical splashes, and is sturdy enough to be washed down with a high pressure washer. Resistant to intensive washing typical of processing and packaging environments. Plus: 150% overload protection, password menu protection, menu and key lock, stability indicator, overload/underload indicators, low battery level indicator (i-DT61PW models), auto power off and automatic tare. A dedicated target key allows you to quickly configure over/under weight of packs, speed up line changes and simplify and customize templates for data printing. In the video: How to use the 'checkweighing' mode. In the video: How to use the 'fill' mode.

Memmert UN30 Natural Convection Oven 32L, 115V Temperature Range Ambient +5°C to 300°C Convection T (more)ype Natural Convection Chamber Volume 32L Features - 32L chamber volume accommodates various sample sizes, enhancing lab versatility - Precise temperature control from +5°C above ambient to 300°C for sensitive applications - Ergonomic PID controller with high-definition TFT display for intuitive adjustments - Durable stainless steel interior and exterior, corrosion-resistant for rigorous use - Natural convection ensures uniform heat distribution for delicate samples - Pre-heated fresh air admixture with adjustable air flap for temperature uniformity - Adaptive settings include programmable temperature, timer, and setpoint wait for workflow optimization - AtmoCONTROL software for data logging and remote monitoring via Ethernet - Easy-to-clean stainless steel interior with reinforced ribbing, ideal for frequent use The Memmert UN30 Natural Convection Oven 32L, 115V delivers precise temperature control from Ambient +5°C to 300°C, making it ideal for a variety of sensitive applications. Featuring an ergonomic digital PID controller with a high-definition TFT display, this oven offers intuitive settings and rapid access to temperature adjustments. Built for rigorous lab environments, its durable stainless steel construction resists corrosion, while the natural convection system ensures even, consistent heating distribution across all samples. Fully adjustable safety controls, including a built-in overtemperature monitor, provide added protection and peace of mind. With an easy-to-clean interior and robust stainless-steel shelving, the UN55 maximizes efficiency in daily operations, delivering reliable performance for years to come. INCLUDED: The Memmert UN30 Natural Convection Oven 32L, 115V includes: - 1 x Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

PS X7.M is a series of advanced-class precision balances of high resolution based on RADWAG MonoBLOC (more)K technology. The innovative construction of PS X7.M balance features a new single-point weighing pan fastening, which ensures its excellent geometry and minimizes eccentricity error. The labyrinth-shape fastening guarantees excellent resistance to contamination. Weighing module RADWAG MonoBLOCK technology enables weighing loads with the readability of d=0.01 g at the maximum capacity of 10 kg. Rigid base ensures stability of the weighing system and great resistance to shocks. Internal adjustment system means precision and high measurement repeatability. Leverage of internal weight mass enables adjustment within the whole measuring range. Features: d=0.01 g readability at 10 kg max capacity great resistance to ambient conditions stability and repeatability over time RADWAG MonoBLOCK technology internal adjustment within the whole measuring range complex databases and ALIBI memory ergonomic 5” colour touchscreen touch-free operation Databases The instrument allows saving completed measurement data as complex reports and graphs. There are 7 databases: Operators (max 100 entries), Products (max 5 000 entries), Weighings (max 50 000 entries), Packaging (max 100 entries) Formulations (max 100 entries), Customers (max 1000 entries), The balance enables creating formulation reports (max 500 entries). ALIBI memory provides data protection and facilitates automatic measurement recording (max 500 000 weighing records). The memory facilitates data previewing, copying and archiving. Communication PS X7.M series is equipped with the following interfaces: 2 x RS 232, USB type A, USB type B, Ethernet and Wireless Connection. USB allows for fast transfer and copying of work results (measurements, reports, databases) to a computer or other weighing device. The balance provides possibility of remote data management.

Julabo CORIO CD-BT27 Open Bath Heating Circulator, 115V/60Hz (NRTL Certified) Working Temperature Ra (more)nge 20°C to 100°C Heating Capacity 1000W Fluid Type Water, Silicone Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over between internal and external circulation - USB connection - Class III (FL) according to DIN 12876-1 The Julabo CORIO™ CD Immersion Heating Circulator Open Bath combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. The CORIO™ CD immersion circulator provides temperatures to 100°C in plastic tanks and to 150°C in stainless steel tanks. Integrated pump enables temperature incubation for internal or external bath applications. A lever below the display enables simple adjustment between internal and external flow. Pump capacity: 15 L/min; 5.1 PSI. The integrated USB port provides external PC communication for control / monitoring and data logging. INCLUDED: The Julabo CORIO CD-BT27 Open Bath Heating Circulator, 115V/60Hz (NRTL Certified) includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Trayster Basic Shaker Permissible Shaking Weight 2 kg Speed (fixed) 20 rpm Working Temperature (more) 50 - 500 °C Features - Overhead shaker with smooth vertical rotation at fixed 20 rpm - Versatile attachments for mixing samples in tubes up to 50 ml - Removable attachments for quick and easy cleaning - Operates within a wide temperature range of 4 to 50 °C - Simple operation with a user-friendly foil keypad - Reliable performance suitable for continuous use Overhead shaker with vertical rotation for smooth but effective mixing with a fixed speed. Ideal for biological samples, particularly blood samples. Suitable for separating and mixing processes of powdered and liquid samples in Eppendorf tubes and Greiner tubes up to 50 ml. The easy removable attachments allow simple and quick cleaning of the unit of spilled samples. INCLUDED: The IKA Trayster Basic Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 1 Year Warranty Extension with IKA Registration) IKA Trayster Basic Shaker Specifications Type of movementoverheadPermissible shaking weight (incl. attachment)2 kgPermissible ON time100 %Speed min. 0 rpmSpeed fix 20 rpmSpeed displaynoneTimer displaynoneOperating modecontinuous operationDimensions (W x H x D)460 x 180 x 140 mmWeight1.6 kgPermissible ambient temperature4 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage100 - 240 VFrequency50/60 HzDC Voltage24 VCurrent consumption1000 mA

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg