Leica HC PL Apo 20x/0.80 506529 11506529

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Specac Silver Gate Evolution Single ATR Spectroscope Accessories Lab This item was removed from a un (more)iversity where it was surplus to requirement. It is in good cosmetic condition and good mechanical order, we are unable to test it further at our facility. Faults:The mirrors in the unit need cleaning; they are removable and adjustable. Two of the top plate assemblies with part number J have stickers stating they are poor quality. Also included are the following: 3 x ZnSe flat crystal top plate assemblies Part No. 10683-1 Part Nos. J 21967 J 21966 M27867 1 x Bottom plate with prism 1 x Concave pellet anvil Part No. GS10532 2 x User Manuals 2 x Spare "O" rings to hold anvil in place 1 x Volatiles cover Part No. GS10503 2 x Bellows to connect unit to infrared spectrometer 1 x Glass prism marked calcium and fluoride prism DRGN2 18328 1 x Storage and transport hard case

Ohaus a-AP50MM-B Photometer Fixed Wavelength 365 nm; 420 nm; 455 nm; 525 nm; 560 nm; 570 nm; 630 nm  (more)Photometric Measuring Range 0 Abs to 1 Abs Wavelength Accuracy ±1.0nm Features - The AP50MM is equipped with a real-time dynamic display for eachmeasurement, to provide fast, reliable results - Can record up to 30,000 datapointswith time and date stamp - Built-in calibration curves provide automatic selection of appropriatewavelengths from the long-lasting LED light source, store commonly used tests for efficiency - Large, backlit display makes it easier to read real-time results - Fixed wavelengths: 365 nm, 420 nm, 455 nm, 525 nm, 560 nm, 570 nm, 630 nm - Turbidity optical system based on nephelometric measurement - Photometric accuracy of ± 0.005 Abs at 1.0 Abs nominal - Compact and lightweight design weighing only 1.32 lb (0.6 kg) - Operates on 4 AA (LR6) batteries with a typical life of 6 months The Ohaus a-AP50MM-B Photometer is a standalone, multifunctional device designed for fast and reliable colorimetric and turbidity measurements in field applications. Engineered with a compact, rugged design, this photometer provides exceptional performance with a real-time dynamic display for each measurement, allowing for precise and efficient analysis. Capable of storing up to 30,000 data points with time and date stamps, it ensures seamless data management for professional use. The a-AP50MM-B features built-in calibration curves that automatically select the optimal wavelength from its advanced LED light source, including near-UV at 365 nm, making it highly versatile for various testing requirements. A large, backlit graphical LCD offers clear visibility of results, even in low-light conditions, while the device’s nephelometric turbidity optical system ensures accurate measurements ranging from 0 to 200 NTU. With its lightweight construction at just 1.32 lbs and operation powered by 4 AA batteries lasting up to six months, the a-AP50MM-B is perfect for on-the-go applications. While this model does not include additional accessories like the a-AP50MM-F, it delivers all the essential features for high-quality analysis, making it a reliable choice for water sample testing in diverse environments. INCLUDED: The Ohaus a-AP50MM-B Photometer includes: - >Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Microscope trinocular inverted Oxion OX.2053-PL with stage mechanical PL 10/20 / 40x, 5 W NeoLED ™an (more)d with carrying case. SPECIFICATIONS EYE Plan eyepieces DIN wide field HWF 10x / 22 mm HEAD Head trinocular, inclined 45 °. Adjusting the interpupillary distance on the tube-holder left eyepiece • The interpupillary distance is adjustable from 54 to 75 mm • Output trinocular upright for photo/video and selector image 100:0% and 80-20%. REVOLVER HOLDER OBJECTIVES Revolver holder objectives quintuple oriented towards the interior. OBJECTIVES • Objectives long working distance (LWD) Plan with correction to infinity. Factors of increased 10x/0.25, 20x/0.40 and 40x/0.60. All the optics are coated with anti-fungal and anti-reflective to obtain the maximum performance of the light APPROACH Controls, macro focus and fine on-axis coaxial. Precision 2 μm, a total distance of approximately 24 mm. STAGE Plate 250x230mm with stage mechanical X-y 120 x 78 mm Is supplied with the following accessories: · Metal plate for Ø 35mm for the crop. · Plate for fastening of preparations of 76x26mm. · Glass plate. CAPACITOR A. N. 0.30 iris diaphragm. Working distance 72mm. LIGHTING Transmitted 5W LED with adjustable intensity and internal transformer for 100-240V power. Fuse 3.15 A / 250V. PACKAGING Supplied with power cable, cover anti-dust and manual of instructions.

This variable speed shaker with a large platform is ideal for gentle mixing. This model is equipped  (more)with an LED display, while the speed and time are controlled via a knob. The oscillating wave motion is ideal for washing and blotting procedures. The non-slip mat keeps the containers in place. Digital setting and display of speed and time Can be used at 4 to 40 °C (80% relative humidity, non-condensing) in an incubator or cold room Continuous or timer operation: integrated digital timer for 1 s to 90 min. or for 1 min. to 9 h; with automatic switch-off and display of the remaining time BioCote antimicrobial protection Shaking motion: Rocking wave motion Speed ​​range: 5 – 70 rpm Angle: 7° (fixed) Plateau (WxD): 355 x 355 mm Maximum load: 10 kg Dimensions (WxDxH): 360 x 420 x 160 mm Weight: 10 kg

Metrohm exchange unit 20 ml.

The impulse bar sealer hpl 450 A seals any type of thermoplastic (as well as compostable and biodegr (more)adable materials such as ORGANIXprotect) plastic film and aluminium laminate film. The sealing and cooling time can be set separately and the film length can easily be adapted to the item being packaged. Thanks to the impulse process, the device is very cost-effective since it only draws power when it is being used. A standard 3 mm  wide sealing seam, consistent contact pressure thanks to an integrated interlock magnet and constant temperature distribution over both sealing bars ensure a fast and reliable sealing process. The simple operation is effected via a footswitch.

This Beckman Centrifuge Model - J2-21 Cat no. 341737 with JA-10 10000rpm Rotor was removed from (more) a university lab where it was surplus to requirements. The centrifuge has been professionally serviced and is in full working order. There is a full report available on request. Included are manuals for the centrifuge & rotor along with some O-Rings for the JA-10. Rotor Type - JA-10SN - E 209946 X 500ml Slots

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.