Leica DMI3000B Inverted Fluorescence Microscope GR N2.1 2,5x 5x 10x 20x 40x

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Prior PX042 Compound Microscope With Four Objectives Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and in full working order. This microscope features: Four-position turret with the following objectives: E Plan 4 x / 0.10 -0.17E Plan 10 x Ph / 0.25 -0.17E Plan 40 x Ph / 0.65 -0.17E Plan 100 x Ph / 1.25 oil -0.17 Eyepieces: 2 x WF 10x/22

Carl Zeiss Stativfuss U Surgical Microscope w/ Control Panel This was removed from a university lab (more) where it was surplus to requirements. It powers up and is in good cosmetic condition, the control panel successfully communicates and functions with the microscope. Included are; Carl Zeiss Stativfuss U Surgical Microscope w/ Control PanelModel: Stativfuss USerial#: 30 53 60 Carl Zeiss Lamp Power SupplySerial#: 30 34 79 Zeiss 12.5x Eyepiece x 4

Leitz Diavert Inverted Microscope w/ 3 x Objectives This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use. Included are; 2x Eyepieces:PERIPLAN 10 x Leitz Wetzlar Germany Objectives:Phaco 1 L32 /0,40 170/-Phaco 1 10/0.25 160/-Phaco 1 10/0.25 160/-

Nikon Eclipse Ni Microscope With Infinity 3 Camera Lab This system was removed from a university whe (more)re it was surplus to requirement. The microscope is in good cosmetic condition and full working order. It is fully operational with both software installed on the included PC. Includes the following: HP Desktop PC with Windows 10.Software installed:- Lumenera Infinity Analyze 7.1.1.66 imaging software. - And MicroManger 2.03. Infinity 3 camera with power supply cable. Objectives: - Nikon Microscope Objective - Plan Fluor 10X/0.30 Ph1 DLL ∞/0.17 WD 16.0 - Nikon Microscope Objective Plan Fluor 20X/0.50 DIC M/N2 ∞/0.17 WD 2.1 - Nikon Microscope Objective Plan Fluor 40X/0.75 Ph2 DLL ∞/0.17 WD 0.72 Eyepieces: - 2 x Nikon C-W10xB/22

Motic PA53 FS6 EDF Trinocular Upright Biomedical Microscope w/ LUMOS Fluorescence LED Objectives S-A (more)PO (Fluor) 4X, 10X, 20X, 40X, 100X Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Equipped with a 6-channel turret and high-powered LUMOS LED for superior fluorescence illumination. - Delivers high color fidelity and resolution with a 23mm FOV. - Features Plan UC Fluor objectives for ultra-flat, high-contrast imaging, ideal for UV-Visible fluorescence. - Includes two empty filter cubes for customizable application needs. - Allows precise focus adjustment for both eyepieces. - 4X to 100X, accommodating various magnification needs. - LUMOS FL LED provides over 20,000 hours of operation. The Motic PA53 FS6 EDF is a high-end fluorescence life-sciences trinocular microscope equipped with a 6-channel fluorescence turret, featuring pre-mounted DAPI, FITC, and TRITC filter cubes, plus two user-configurable empty filter cubes. Its superior optics deliver high color fidelity and resolution, with a 23mm field of view. The PA53 FS6 EDF boasts a reflective fluorescence illumination system with a powerful LUMOS LED and a transmitted 100W Halogen light source. INCLUDED: The Motic PA53 FS6 EDF Trinocular Upright Biomedical Microscope w/ LUMOS Fluorescence LED includes: - S-APO (Fluor) 5X, 10X, 20X, 50x, & 100X Objectives - Motic Fluorescence Imaging Software Plug-In - Motic Images Plus 3.0 Software - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

3 x Faulty Findlay Irvine Type: 292/16 Grip Testers Spares/Repairs These were removed from a univers (more)ity lab where it was surplus to requirements. The items are in reasonable cosmetic condition but have not been tested. All are incomplete, missing drawbars & one is missing the Front wheel, chain & signal Processing Unit. They are sold for spares/repairs.

HP 6890 5973 Series G1999A GC-MS Gas Chromatograph Mass Spectrometer System This was removed from a  (more)university lab where it was surplus to requirements. The lab confirmed that it is in good working order. At our facility we have connected the system together and powered it up, but not tested further. It is in good cosmetic condition with minor marks. Included are; HP ALS ready G1530ASerial No. US00028126 HP 5973 Mass Selective DetectorG1999ASerial No.US91430461 HP 59864B Ionisation Gauge ControllerSerial No. US60103518

Yamato VBE-306 36 in. Wide Vented Balance Enclosure, 115V Air Flow 80 FPM Viewing Medium 3/8" Jewel (more)ed Acrylic Plastic Noise Level 55 dBA at 80 FPM Features - Includes top mounted HEPA/Blower filtration, set-up to circulate the internal chamber atmosphere, through the HEPA filter and into the lab - The smooth curved, or rounded ABS™ airfoils provide gentle, unobstructed air flow through rear, and side, baffles and through top mounted HEPA filter - Constructed with optically clear 3/8” jeweled acrylic plastic - Front viewing sash with multiple air foils for higher containment and draft deflection - Includes phenolic base with superior chemical resistance and provides higher analytical balance stabilization - Low vibrations. The black base allows for easy powder detection - Electrical cord outlet port - Air flow alarm system - Adjustable front draft protection - Side blank plate for optional Bag-In / Bag-Out port - Includes face velocity alarm Self-contained laboratory unit ideal for fine powders, chemicals and biological products. Designed with top-mounted HEPA/blower filtration set up to circualte internal chamber atmosphere, through the HEPA filter and into the lab. Constructed with optically clear 3/8" jeweled acrylic plastics and phenolic base with superior chemical resistance. Outside width dimension is 36". 115V. INCLUDED: The Yamato VBE-306 36 in. Wide Vented Balance Enclosure, 115V includes: - Yamato VBE-306 36 in. Wide Vented Balance Enclosure, 115V - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The terminals are intended to designing scales with maximum resolution of 6000 e. PUE 5 series, simi (more)larly to the basic model, are enclosed in a stainless steel housing which allows for reaching the highest IP rating, i.e. IP 67. The terminals come standard with interfaces: 2 × RS232, 1 × RS485, 1 x Ethernet, 4 x USB 2.0. PUE 5 series can be extended by additional 3 weighing modules for simultaneous operation of maximum 4 weighing platforms. Intended Use: The terminal PUE 5 series is a multifunctional weighing device. It combines the best features of a PC computer and a scale. The PUE 5 operates on basis of OS Windows, creating the best option for configuring the device to individual customer requirements through installing corresponding application. If applied with dosing or formula making systems, the PUE 5 allows for operation with multiple weighing platforms, and simultaneous dosing with full process control. A dosing or formula making system that is configured on basis of the terminal PUE 5 series does not require an additional PC computer. Database editing is possible from the level of PUE 5 touch screen display or an optional PC keyboard. Area of Use: Main applications for terminal PUE 5 series: Designing industrial load cell scales; Multiple weighing applications supervised by a computer system through Ethernet module; Possibility of connecting large quantity of additional weighing platforms to industrial terminals. Terminal type: PUE 5.19R – resistive touch screen technology. Protection class IP67. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material).

Scilogex MicroPette Plus 12-Channel Autoclavable Pipettor, 50-300μlThe MicroPette Plus pipettes are  (more)fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Plus 12-Channel Autoclavable Pipettor, 50-300μl includes: - Two Year Manufacturer's Warranty