Job Lot of Mixed Microscope (Leitz, Bauch & Lombs, Philip Harris, OPAX) NOTE - THIS IS A SPARES/REPAIRS ITEM

Motic AE21 Series Trinocular Inverted Microscope with 4x Objectives This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and is in very good, used cosmetic condition. The microscope has been tested with one of our slides and is working well and is clear. On the microscope are the following modules; 1x N.A. 0.30 condenser (WD 72mm) with halogen illumination 6v/30w. 1x Centerable PH slider supplied with phase ring PH 1 2 x Eyepieces - W10x/20 4 x Objectives: 1x Motic E Plan LWD PH 40x/0.60 ∞/1.1 WD 2.11x Motic E Plan LWD PH 20x/0.40 ∞/1.1 WD 5.51x Motic E Plan PH 10x/0.25 ∞/1.1 WD 6.31x Motic E Plan 4x/0.10 ∞/1.1 WD 14.2

Olympus Stereo Microscope SZX9 with Binocular Head and Transmitted Light Stand This was removed fro (more)m a university lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with marks from use. The microscope features: Olympus SZX-ILLK Illuminator Olympus Microscope SZX-FOF Coarse and Fine Focus Coaxial Handle 2 x Olympus WHSZ10X-H/22 Eyepiece

Zeiss Axio Vert.A1 FL Inverted Microscope This system was removed from a university lab where it was (more) surplus to requirements. The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted. The instrument is configured as follows: - 1 x Microscope stand Axio Vert.A1 FL (431030-9010-000) - Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination - Reflector modules: DAPI, FITC, TRITC, empty - 1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000) - Position 1: empty - Position 2: 424228-9060 0.05T Neutral density filter 0.05 - Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55 - Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55 - Position 5: empty - 1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000) - 1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000) - 1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23 - 1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000) - 1 x Camera adapter 60N-C 2/3" 0.5x (426112) - 1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00) - 1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000) - Object guide M, 130x85mm, for Axio Vert (432333-9040-000) - 1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

Motic PA53 BIO Trinocular Upright Biomedical Microscope, 100W Halogen Transmitted Illumination Objec (more)tives S-APO Fluor 5X, 10X, 20X, 50X Objectives Optical System Colour Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Transmitted, Full Kohler 100W Halogen Illumination - Standard PA53 BIO and PA53 FS6 configurations are equipped with transmitted, full Kohler 100W halogen illumination. - Intelligent heat-reduction engineering ensures you can use our 100w halogen illumination for long periods without worrying about injury due to overheating. - In order to reduce operator eyestrain, the standard PA53 BIO and PA53 FS6 configurations are equipped with super wide-field FN23, diopter adjustable eyepieces. - The 30-degree, Siedentopf type observation tube offer light distribution of 100:0, 20:80, and 0:100 and ensures a comfortable viewing angle during extended use. - Equipped with a multifunctional illumination control knob The PA53 BIOMED Compound laboratory microscope series is designed with the user in mind. In keeping with Motic’s mission statement of providing technologies for people at affordable prices, we are proud to offer our new entry-level high-end microscope series for clinical and life science applications with quality research performance at an affordable price. Our PA53 BIO and PA53 FS6 models have an ergonomic design helping to reduce user fatigue during extended periods of use and also feature an intuitive control layout for optimized and efficient workflow. INCLUDED: The Motic PA53 BIO Trinocular Upright Biomedical Microscope, 100W Halogen Transmitted Illumination includes: - HPlan S-APO (Fluor) 4X, 10X, 40X, 100X Objectives - Wide-field eyepiece 10X/25mm - Dust Cover - Allen Key - Immersion Oil (5ml) - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic BA210S Binocular Microscope with LED Illumination w/o 100x Objective This version of the Motic (more) BA210S is a biological compound microscope with a binocular head and ASC PL 4x, 10x, and 40x objectives designed for advanced biology students, teachers, doctors, and lab technicians. Every aspect of these microscopes contributes to making your daily work easier. The ergonomic shape of the stand and the comfortability of the different heads enables fatigue-free viewing for many hours.The BA210S is designed for both educational and teaching environments from basic life sciences to medical applications. Contrast methods like Phase Contrast, Polarization and Dark field are easily performed by using optional accessories.INCLUDED: The Motic BA210S Binocular Microscope with LED Illumination w/o 100x Objective includes: - 10x Eye Piece - Objectives: ASC PL 4X, 10X, 40X S - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic BA210 LED Digital Compound Microscope Magnification Range 4x to 100x Optical System Colour Cor (more)rected Infinity (CCIS) Illumination 3W LED Features - Binocular head Siedentopf type, 30º inclined with Built-in digital camera CMOS 1/2” chip - 3MP - 2048x1536 pixels with USB 2.0 output - Widefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment - Reversed quadruple revolving nosepiece - CCIS EF-N Plan Achromatic objectives EF-N PL 4X, 10X, 40X S, 100X S Oil - Built in low position coaxial mechanical stage (Right-hand control) - Focusable Abbe condenser N.A. 0.90/1.25 with iris diaphragm and slot - Coaxial coarse and fine focusing system with tension adjustment - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The new Motic BA310 Digital Pro Upright Microscope is designed for the rigors of daily routine work specifically for diverse applications in Hematology and Cytology. The BA310 Digital is a version of the BA310 featuring a built-in 3.0MP sensor. The demands placed on any routine microscope for daily work needs careful focus on every microscope detail. The new BA310 series features a powerful adjustable light source to meet both delicate and detailed lighting requirements for all sample types while the fully featured Koehler illumination helps in highlighting even the weakest-stained specimens. New CCIS EF-N Plan Achromat objectives provide optimal image contrast through newly designed multi-layer lens coatings. INCLUDED: The Motic BA210 LED Digital Compound Microscope includes: - Widefield high eyepoint eyepiece N-WF10X / 20mm with diopter adjustment - Built-in Digital Live Hi-Res Imaging Chip, 2592 x 1944 Resolution USB 2.0 - Reversed quadruple revolving nosepiece - CCIS EC Plan Achromat objectives 4x, 10x, 40x S, 100x S-oil - Built in low position coaxial mechanical stage (Right-hand control) - Focusable Abbe condenser N.A. 1.25 with iris diaphragm and slot - 45mm blue filter, immersion oil (5mL), power cord, allen hexagonal key, vinyl dust cover - Built in illumination 3W LED with intensity control - Motic Images Plus 3.0 for PC and MAC - Calibration Slide - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

LABORATORY OVEN SLW SMART POL-EKO SLW - FORCED AIR CONVECTION The SLW series laboratory ovens are de (more)signed to reach high temperatures, up to 300 °C. Available from 15 to 1000 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use, just like your smartphone. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - 4,3", clear, full colour touch screen - USB and LAN ports for data transfer - multi-segment time and temperature programs - loop function up to 255 times or endless - adjustable start delay feature - adjustable ramps - recording of min, average and max temperature value for each segment - overview of set and current parameters while operating - operating in temperature or time priority mode - fan speed control in the range of 0 … 100% or 10% … 100% (depending on the chamber capacity) - temperature sensor fail alarm - possibility of temperature calibration by the User - power failure control system (program continued after restoring power) - visual and sound alarm - internal memory for programs and data storage - operating with gloves on - event registry - user manual for direct download QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLW SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLW SMART SERIES The 10 models of the SLW series cover most of your needs: from mini oven to the 1000 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for incubator models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

This Agilent Technologies HPLC 1200 Series G1311A Quat Pump Quaternary was removed from a university (more) lab where it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility.

This jet engine is being sold on behalf of a leading UK universities engineering and aerospace depar (more)tment. The engine which would have originally cost around 1 million USD was owned by MyTravel Aircraft Engineering. It was designed for the DC10 aircraft. In 2004, the engine type was retired as MyTravel retired the DC10 and moved to the Airbus Aircraft. Rather than disposing of the engine, it was moved to this universities engineering department as a training resource for students. This is a genuine full size jet engine. Its an extremely rare opportunity to acquire a unit like this. General Electric Model: CF6-6D1A Jet EngineRemoved from retired DC10-10 AircraftHas flown about 40 million miles in its 20-year working life. Please note - whilst the engine was operational prior to going into storage, it is no longer in service and we can offer no warranties to its current performance. It is initially intended for sale for display / museum purposes only, and therefore we would need to discuss any intended flight of the engine or any of its parts. There is some damage to the nose of the engine which occurred after the item was collected and is not shown in the original photo. We have got images of the damage. It is a non negotiable of sale that we will need to diligence check the intended use of any prospective buyer. In most cases, a non-flight disclaimer will be required unless you are able to provide appropriate documentation / evidence to demonstrate that any intended use will meet the requirements of the Civil Aviation Authority or other relevant governing bodies. We can discuss this further with you prior to sale and then we would need to approve any proposed flight plans with our university client prior to sale.

Termobloque Fibertron 9560. Temperature max. of 120 ºC. Block for 24 tubes. Analog Control. Specific (more)ations: 220-240 V; 50-60 Hz

suitable for 15, 24, 35, 36 tubing