Home Doctor Prof Monoculair Transmitted Light Microscope

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This ZEISS AxioLab 5 Teaching Head was removed from a university lab where it was surplus to require (more)ments. This item is in very good cosmetic condition. Objectives included: 2 x Carl Zeiss W-PI 10x/23

Job Lot of Mixed Microscope (Leitz, Bauch & Lombs, Philip Harris, OPAX) This job lot of items co (more)me from a university, where they were surplus to requirement. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. This Job-Lot contains the following 16 x Leitz SM-LUX 24 x Bausch + Lombs 9 x Philip Harris 10 x OPAX NES 2 x OPAX 6 x Prior England 1 x Griffin Co-ordinate Vernier Microscope 1 x Griffin & George Vintage Spectrometer 3 x Griffin & George Vintage Microscope 9 x Unbranded light sources

Carl Zeiss Axioskop EL Einsatz Microscope This was removed from a university lab where it was surplu (more)s to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with marks from use. Eyepieces:2 x 44 40 32 Objectives:Plan NEOFLUAR 10x/0.30 ∞/0.17ACHROSTIGMAT 40x/0.65 ∞/0.17, 44 01 50Epiplan - NEOFLUAR 50x/0.80 HD 44 23 50 (Some of the text has come off this objective since there was a sticker on it. Removing it must have lifted the print.)

Zeiss Axioplan 2 Fluorescence Microscope w/ 4 Objectives Lab This item was removed from a university (more) where it was surplus to requirement. The unit appears to be functioning well and can also be controlled via the free MicroManager software. It is in good cosmetic condition. It does feature the following: 2x Eyepieces PL 10 x 25P/N: 44 40 34 2x Zeiss Plan-NEOFLUAR 40x/0.75 ∞/0.17P/N: 44 03 51P/N 44 03 50 1x Zeiss FLUAR 100x/1.30 oil ∞/0.17P/N: 44 02 85 1x Zeiss Plan-NEOFLUAR 63x/1.25 oil ∞/0.17P/N: 44 04 60 1x Carl Zeiss HAL 100 12v 100w lamp houseP/N: 1039-685 1x Zeiss Reflector Turret with 6 filters1x FITC 1x TRITC1x YFP1x CFP1x Cy51x DAPI

Durr Technik 90L Oil Free Air Compressor This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order. It is in good cosmetic condition but the glass is missing from the gauge.

Lab Companion UVC-01 UV Cabinet This was removed from a university lab where it was surplus to requi (more)rements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks

Qiagen PyroMark Q96 ID And PyroMark Q96 Workstation  Lab This item was removed from a universit (more)y where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item also includes the following: Pyromark Q96 Lab station with plastic liquid container

Highest Precision The E1 class mass standard of 20 g is a cylindrical standard with the highest prec (more)ision, designed for applications requiring accurate measurements. Made of high-quality materials to ensure stability and measurement accuracy. Ideal for laboratories, research centers, and anywhere precision weighing is needed.

Labconco 9000621 WaterPro PS/HPLC Pistol Polishing Station, 115V, 60HzFeatures - Timed dispense for (more) unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000621 WaterPro PS/HPLC Pistol Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards XDS46iC Dry Scroll PumpFeatures - Peak pumping speed of 23.5 CFM - Ultimate vacuum of 0.05 m (more)bar (0.04 Torr) - Bearing shield ensures separation between process gases and bearing lubrication to ensure a clean vacuum and no possibility of contamination to lubrication from process gases, which prolongs bearing life - Axial air gap motor reduces overall pump size and gives low power and noise - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single-sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time - Fitted with Chemraz internal valve pads and stainless steel exhaust port for increased corrosion resistance XDS scroll pumps have become industry standard when dry pumping is essential, proving to be a robust and clean vacuum pump solution in a range of applications and processes. The XDS35i pump has an innovative bearing shield that isolates the vacuum environment from all forms of lubricant, making it not only lubricant-free but hermetically sealed. XDS35iNGB variant has had the gas ballast feature removed for applications such as rare gas recirculation and gas recovery. The XDS46i shares many of the same features of the XDS35i but with a peak speed of 40 m3h-1. The pump has been optimised for maximum pumping speed at inlet pressures between 1 mbar and 10 mbar, making it ideally suited for LCMS and ICPMS applications requiring higher pumping speeds. This C variant has been modified so that it is more suitable for use on vapour handling processes and may be used in some applications using corrosive substances. This C version is fitted with Chemraz® internal valve pads and stainless steel exhaust port. INCLUDED: The Edwards XDS46iC Dry Scroll Pump includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty