Carl Zeiss Stemi 508 Stereo Microscope Lab

Nikon SBR-KT This was removed from a university lab where it was surplus to requirements. The unit  (more)powers up and is in good working order. It is in good cosmetic condition with minor marks. Item includes the following: 1 x Tiyoda Plan 2.5 0.065 1 x Nikon 10 x 0.25 2 x HKW10X Eyepiece

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all.

This Unbranded Laboratory Microscope Vibration Isolation Platform was removed from a university lab  (more)where it was surplus to requirements. The unit has not been tested but is in reasonably good cosmetic condition with some marks from use. Size not taking into account the shape - L45 X W60 X H7.5cm

THis was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)none of the objectives are particularly clear, and two don't show an image at all (detailed below). The unit is quite stiff and awkward to use. For these reasons it is sold for spares/repairs. It is in reasonable good cosmetic condition with minor marks. 2x Carl Zeiss Kpl 8x Eyepieces 1x Leitz Wetzlar H 20x/0.40 ∞/1.80 Quarzgl. (no clear image) 1x Carl Zeiss 4494688 Ph2 40x/0.75 160/0.17 1x Carl Zeiss 4459404 Ph2 NEOFLAUR 25x/0.60 160/0.17 1x Carl Zeiss 4836489 Ph2 NEOFLAUR 16x/0.40 160/- 1x Carl Zeiss 4111437 Ph3 NEOFLAUR 100x/1.25 oil 160/- (no clear image). 1x Carl Zeiss Nose Piece III RS 46 62 49-9904 1x Carl Zeiss Stage 47 33 56-9901 1x Carl Zeiss Condenser 4680811 1x Carl Zeiss Microscope power supply 47 20 83 6 volt and 12 volt output. 1x Carl Zeiss Lamp power supply VHW 50f-2b 39 26 41 showing 365 hours and 55 minutes. 1x Carl Zeiss Lamp 12 volt 100 w 46 8019-9901 1x Carl Zeiss Lamp HBO 50 w 46 80 32-9902

This Olympus U-ETBI Microscope Ergo Head Tilt Telescope was removed from a university lab where it w (more)as surplus to requirements. Item appears to function correctly after being tested over a light source and slide and is in very good, clean condition. No further testing was carried out.

The system includes: pt100 probe (code A00000268), magnetic stir bar Ø8x40 mm (code A00000356). Magn (more)etic stirrer AREC.X 7 Precise and accurate thermoregulation for better reproducibility AREC.X 7 is equipped with state-of-the-art heating plate technology, designed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. The AREC.X 7 can be connected to the external Pt100 probe or to the VTF for precise thermoregulation of the fluid. The probe guarantees thermoregulation up to 250°C, with an accuracy of ± 1.0°C, while the VTF guarantees excellent thermoregulation performance up to 300°C and an accuracy of ± 0.5°C. The VTF is equipped with a timer, for unsupervised operation and increased productivity. Powerful stirring for your lab reactions You can rely on the AREC.X 7 for demanding laboratory reactions, as it agitates volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. Absolute safety and ease of use for laboratory operators The AREC.X 7 hotplate stirrer guarantees a superior level of safety and protection for laboratory operators, since it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic soleplate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. Save time with the new control panel Thanks to the digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unparalleled functionality in a line of high performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Animal / Dynamic Weighing, Filling, Totalization / Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC, Statistics Screen 5.7 '' (145 mm) color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232 / Ethernet (accessories sold separately). GLP / GMP data output with real time clock. Construction Metal base, ABS top housing, stainless steel deck, front illuminated level indicator, weigh below hook, safety bracket , calibration lock, 4 touchless sensors, coverage in use Characteristics of the project Selectable environmental filters, auto tare, user selectable range calibration points, software lock and reset menu, user selectable communication settings and data print options, user definable project and user ID, standby automatic, up to 14 operating languages For further information and technical characteristics, download the attached data sheet.

Pumping speed: 1.7 m³/h Ultimate vacuum: 9 mbar Ultimate vacuum with gas ballast: 15 mbar Max permis (more)sible outlet pressure: 2 bar Max pressure difference inlet and outlet: 1.1 bar Permissible relative atmospheric moisture (no condensation): 30 to 85%

KNF LABOPORT SH 840 G IP30 Diaphragm Pumping System Ultimate Vacuum 6 mbar Maximum Flow Rate 34L/mi (more)n (2.04 m3/h) Protection Class IP30 Features - Ideal for extremely aggressive/corrosive gases and vapors - High level of vapor and condensate compatibility - Modular expandable - 100% oil-free transfer - Integrated gas ballast valve - Integrated rotational speed control - 3-color status display for in operation / stand-by / error - Compact, quiet, and reliable - Inlet separator and outlet condenser for excellent solvent recovery - Start against ultimate vacuum of the pump - Environmentally friendly Chemically resistant vacuum pump system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side. Based on the high level of vapor and condensate compatibility the system is perfectly suited for extremely aggressive / corrosive gases and vapors. INCLUDED: The KNF LABOPORT SH 840 G IP30 Diaphragm Pumping System includes: - 2 x Coated Collection Flasks - 2 x Flask Clamps - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson MINIPULS 3 Peristaltic Pump Head, R8 Eight Channel The Gilson MINIPULS 3 Peristaltic Pump Hea (more)d, R8 Eight Channel is a versatile pump head with a maximum flow rate of 40 ml/min and a minimum flow rate of 0.3 ul/min. Its durable construction and compatibility with the Gilson MINIPULS 3 Peristaltic Pump makes it ideal for precise fluid handling in various research and pharmaceutical applications. INCLUDED: The Gilson MINIPULS 3 Peristaltic Pump Head, R8 Eight Channel includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty